inverse_thermal_camera/README.md

18 lines
873 B
Markdown
Raw Permalink Normal View History

2020-01-02 22:20:22 +01:00
![Photo](./photo.jpg)
This is the firmware for a simple thermocromic selfie camera based on
- A OV7670 camera module (without FIFO),
- A STM32F103C8T6 microcontroller, and
- A LTP1245 thermal printer module.
Apart from that, only a level shifter for the thermal printer (which needs 5V signals), a motor driver for its stepper, a pullup for its thermistor, and a MOSFET for turning all power off are needed.
2020-07-23 11:05:57 +02:00
If an SD-card is connected, all photos are also stored there as 2-colour (dithered) BMP files.
2020-01-02 22:20:22 +01:00
More details can be found [here](https://25120.org/post/inverse_thermal_camera/).
2020-05-06 22:00:27 +02:00
## Licence
2020-05-23 22:11:37 +02:00
The device header files in the `third_party` directory are provided by ARM Limited and ST Microelectronics and contain their own licence information. FatFs, also located in `third_party`, contains its own licence information as well. Everything else is ISC licenced.