fruchti/haxmark
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
haxmark/build/main.hex

58 lines
2.4 KiB
Plaintext
Raw Normal View History

Always complete sensor signal sequence when started I started getting paper jam errors which was likely to be caused by communication between printer controller board and operator's panel toggling the tapped data line and therefore resetting the MCU board's state to the idle state while printing. If the state is reset before the signal sequence is completed, the printer of course will not get the sensor signals it is expecting. The line had been commented out because it had caused some weird problems in the past. For example, my printer now needs a hard reset after each print because it refuses to print a second time. As I think not being able to print at all is worse than that, I put the line back into the code.
2015-05-23 16:17:17 +02:00
:100000001AC091C0A7C030C02FC02EC02DC02CC0B8
Initial
2015-05-05 18:49:42 +02:00
:100010002BC02AC029C028C027C027C025C024C0A3
Drive clutch at startup Now you can directly hear if everything is working when turning the printer on.
2015-09-20 13:12:29 +02:00
:1000200023C022C021C0E2C0F1C00CC120C12EC13A
:1000300049C163C17CC111241FBECFEDCDBF10E00B
:10004000A0E6B0E0EAE6F3E002C005900D92A23629
Initial
2015-05-05 18:49:42 +02:00
:10005000B107D9F710E0A2E6B0E001C01D92A836C2
Drive clutch at startup Now you can directly hear if everything is working when turning the printer on.
2015-09-20 13:12:29 +02:00
:10006000B107E1F785D07FC1CBCF1F920F920FB6BA
Initial
2015-05-05 18:49:42 +02:00
:100070000F9211248F939F93AF93BF93809164004D
:1000800090916500A0916600B09167000196A11D56
:10009000B11D8093640090936500A0936600B093B7
:1000A00067008091640090916500A0916600B09116
:1000B0006700892B8A2B8B2B59F48FEF9FEFDC0184
:1000C0008093640090936500A0936600B0936700EE
:1000D000809163008823F1F080916000909161002D
:1000E00001969093610080936000809160009091F0
:1000F0006100892B31F48FEF9FEF90936100809323
:1001000060008091600090916100069710F4959ACC
:1001100001C09598BF91AF919F918F910F900FBEA5
:100120000F901F9018951F920F920FB60F921124E7
Always complete sensor signal sequence when started I started getting paper jam errors which was likely to be caused by communication between printer controller board and operator's panel toggling the tapped data line and therefore resetting the MCU board's state to the idle state while printing. If the state is reset before the signal sequence is completed, the printer of course will not get the sensor signals it is expecting. The line had been commented out because it had caused some weird problems in the past. For example, my printer now needs a hard reset after each print because it refuses to print a second time. As I think not being able to print at all is worse than that, I put the line back into the code.
2015-05-23 16:17:17 +02:00
:100130008F9380916300833021F08091630082303F
:1001400019F481E0809363008F910F900FBE0F90A0
:100150001F9018951F920F920FB60F9211241092B4
:100160006100109260000F900FBE0F901F901895C5
:100170008E9A8D9A8C9A969A959A949AC09AC19AC8
Drive clutch at startup Now you can directly hear if everything is working when turning the printer on.
2015-09-20 13:12:29 +02:00
:10018000B99AC29ABA9AC39ABB9ABC9AC49A82E0A4
:1001900080BF83E083BF8CE786BF81E089BF85B7DE
:1001A000826085BF8BB780648BBF85B7846085BF55
:1001B0008BB780688BBF78941092640010926500B2
:1001C00010926600109267001092630081E097E041
:1001D00026E035E044E053E062E0E0916300F0E0C7
:1001E000E830F105D0F7ED5EFF4F0994C090640050
:1001F000D0906500E0906600F090670078E8C71640
:1002000073E1D706E104F10440F3AAC0C19AC29A8F
:10021000C39A969AC4989498E0916000F091610016
:100220003697D8F6B099D9CFC49A949A9698609395
:1002300063001092640010926500109266001092A4
:100240006700CBCFC0906400D0906500E09066005E
:10025000F09067007EE4C7167DE0D706E104F10464
:1002600008F4BBCFC498C29850936300B6CFB09B3C
:10027000B4CFC198969A10926400109265001092C3
:1002800066001092670040936300A7CFC09064009F
:10029000D0906500E0906600F090670079E4C716A2
:1002A00073E0D706E104F10408F497CFC3981092E5
:1002B00064001092650010926600109267003093FF
:1002C00063008BCFC0906400D0906500E090660022
:1002D000F090670075EDC716D104E104F10408F44D
:1002E0007CCFC29A10926400109265001092660052
:1002F000109267002093630070CFC0906400D0908C
:100300006500E0906600F090670077E3C71671E043
:10031000D706E104F10458F0C19A109264001092DB
:100320006500109266001092670090936300C09081
:100330006400D0906500E0906600F090670071E581
:10034000C71673E0D706E104F10408F446CFC39A58
:10035000109264001092650010926600109267007F
:0A036000809363003ACFF894FFCFBA
:02036A0006008B
Initial
2015-05-05 18:49:42 +02:00
:00000001FF
Reference in a new issue Copy permalink