colorchord/default.conf

93 lines
2.1 KiB
Plaintext

# This is the configuration file for colorchord.
# Most values are already defaulted in the software.
# This file is constantly checked for new versions.
# \r, and ; are used as terminators, so you can put
# multiple entries on the same line.
#Whether to limit the control loop to ~60ish FPS.
cpu_autolimit = 1
#General GUI properties.
title = PA Test
set_screenx = 720
set_screeny = 480
#Sound properties.
buffer = 128
play = 0
rec = 1
channels = 2
samplerate = 11025
wininput = 0
#Compiled version will default this.
#sound_source = PULSE
#-1 indicates left and right, 0 left, 1 right.
sample_channel = -1
sourcename = alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
##################################
# General ColorChord properties. #
##################################
# How much to amplify the incoming signal.
amplify = 2.0
# What is the base note? I.e. the lowest note.
# Note that it won't have very much impact until an octave up though!
base_hz = 55.0000
# This is only used when dealing with the slow decompose (now defunct)
# decompose_iterations = 1000
# default_sigma = 1.4000
# DFT properties for the DFT up top.
dft_iir = 0.6
dft_q = 20.0000
dft_speedup = 1000.0000
octaves = 5
# Should we use a progressive DFT?
# 0 = DFT Quick
# 1 = DFT Progressive
# 2 = DFT Progressive Integer
# 3 = DFT Progressive Integer Skippy
# 4 = Integer, 32-Bit, Progressive, Skippy.
do_progressive_dft = 4
filter_iter = 2
filter_strength = .5
# How many bins per octave to use?
freqbins = 24
# For the final note information... How much to slack everything?
note_attach_amp_iir = 0.2000
note_attach_amp_iir2 = 0.150
note_attach_freq_iir = 0.3000
#How many bins a note can jump from frame to frame to be considered a slide.
#this is used to prevent notes from popping in and out a lot.
note_combine_distance = 0.5000
note_jumpability = 1.8000
note_minimum_new_distribution_value = 0.0200
note_out_chop = 0.05000
#=======================================================================
#Outputs
This is a vornoi thing:
outdrivers = DisplayArray, OutputVoronoi
lightx = 64
lighty = 32
fromsides = 1
shape_cutoff = 0.03
satamp = 5.000
amppow = 2.510
distpow = 1.500