fruchti/colorchord
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
colorchord/embedded8266
History
con-f-use 35a4e9db73 Handle overhang when verifying flash
2016-08-15 02:02:11 +02:00
..
common Handle overhang when verifying flash 2016-08-15 02:02:11 +02:00
driver Update the 8266 stuff to my newest build. 2015-08-16 00:54:18 -04:00
hardware move readme 2016-08-13 14:14:27 -04:00
include Update ESP8266 version 2015-07-29 01:54:49 -04:00
user Now for use with the ESP8285 and having GPIO16 as input! 2016-07-04 16:59:34 -04:00
web Utilize web/Makefile from within the main Makefile (esp82XX) 2016-08-04 15:50:13 +02:00
ccconfig.h major changes to the backend for controlling the ESP8266 ColorChord. 2015-08-03 01:19:11 -04:00
image.elf Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00
image.elf-0x00000.bin Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00
image.elf-0x40000.bin Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00
LICENSE Update ESP8266 version 2015-07-29 01:54:49 -04:00
makeconf.inc Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00
Makefile Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00
README.md Add VERIFY_FLASH_WRITE as remedy for #15 2016-08-14 18:50:55 +02:00

README.md

#ESP8266 ColorChord

WARNING THIS IS UNDER CONSTRUCTION

(based off of ESP8266 I2S WS2812 Driver)

This project is based off of the I2S interface for the mp3 player found here: https://github.com/espressif/esp8266_mp3_decoder/

If you want more information about the build environment, etc. You should check out the regular WS2812 driver, found here: https://github.com/cnlohr/ws2812esp8266

WARNING: This subproject is very jankey! It's about stable, but I don't think it's quite there yet.

Hardware Connection

Unfortunately the I2S Out (WS2812 in) pin is the same as RX1 (pin 25), which means if you are programming via the UART, it'll need to be unplugged any time you're testing. The positive side of this is that it is a pin that is exposed on most ESP8266 breakout boards.

The audio data is taken from TOUT, but must be kept between 0 and 1V.

Notes

./makeconf.inc has a few variables that Make uses for building and flashing the firmware. Most notably the location of the toolchain for the esp8266/85 on your system. You should edit them according to your preferences or better add export ESP_ROOT='/path/to/the/esp-open-sdk' to your bashrc.

If you have problems with burning the firmware or transfering page data over network (make netburn or make netweb), you should try uncommenting

OPTS += -DVERIFY_FLASH_WRITE

in makeconf.inc. This way the esp checks if the flash is written correctly. Especially with some ESP-01 modules there has been a problem with the flash not being written correctly.