226 lines
7 KiB
C
226 lines
7 KiB
C
/******************************************************************************
|
|
* Copyright 2013-2014 Espressif Systems (Wuxi)
|
|
*
|
|
* FileName: uart.c
|
|
*
|
|
* Description: Two UART mode configration and interrupt handler.
|
|
* Check your hardware connection while use this mode.
|
|
*
|
|
* Modification history:
|
|
* 2014/3/12, v1.0 create this file.
|
|
* [various] Not released, Modified by Charles Lohr to change the RX behavior
|
|
*******************************************************************************/
|
|
#include <c_types.h>
|
|
#include <osapi.h>
|
|
#include <ets_sys.h>
|
|
#include <driver/uart.h>
|
|
|
|
#include <driver/uart_register.h>
|
|
//#include "ssc.h"
|
|
//#include "at.h"
|
|
|
|
// UartDev is defined and initialized in rom code.
|
|
extern UartDevice UartDev;
|
|
//extern os_event_t at_recvTaskQueue[at_recvTaskQueueLen];
|
|
|
|
LOCAL void uart0_rx_intr_handler(void *para);
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart_config
|
|
* Description : Internal used function
|
|
* UART0 used for data TX/RX, RX buffer size is 0x100, interrupt enabled
|
|
* UART1 just used for debug output
|
|
* Parameters : uart_no, use UART0 or UART1 defined ahead
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
LOCAL void ICACHE_FLASH_ATTR
|
|
uart_config(uint8 uart_no)
|
|
{
|
|
if (uart_no == UART1)
|
|
{
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
|
|
}
|
|
else
|
|
{
|
|
/* rcv_buff size if 0x100 */
|
|
ETS_UART_INTR_ATTACH(uart0_rx_intr_handler, &(UartDev.rcv_buff));
|
|
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
|
|
// PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
|
|
}
|
|
|
|
uart_div_modify(uart_no, UART_CLK_FREQ / (UartDev.baut_rate));
|
|
|
|
WRITE_PERI_REG(UART_CONF0(uart_no), UartDev.exist_parity
|
|
| UartDev.parity
|
|
| (UartDev.stop_bits << UART_STOP_BIT_NUM_S)
|
|
| (UartDev.data_bits << UART_BIT_NUM_S));
|
|
|
|
//clear rx and tx fifo,not ready
|
|
SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
|
CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
|
|
|
//set rx fifo trigger
|
|
// WRITE_PERI_REG(UART_CONF1(uart_no),
|
|
// ((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
|
|
// ((96 & UART_TXFIFO_EMPTY_THRHD) << UART_TXFIFO_EMPTY_THRHD_S) |
|
|
// UART_RX_FLOW_EN);
|
|
if (uart_no == UART0)
|
|
{
|
|
//set rx fifo trigger
|
|
WRITE_PERI_REG(UART_CONF1(uart_no),
|
|
((0x01 & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
|
|
((0x01 & UART_RX_FLOW_THRHD) << UART_RX_FLOW_THRHD_S) |
|
|
UART_RX_FLOW_EN);
|
|
}
|
|
else
|
|
{
|
|
WRITE_PERI_REG(UART_CONF1(uart_no),
|
|
((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S));
|
|
}
|
|
|
|
//clear all interrupt
|
|
WRITE_PERI_REG(UART_INT_CLR(uart_no), 0xffff);
|
|
//enable rx_interrupt
|
|
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA);
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart1_tx_one_char
|
|
* Description : Internal used function
|
|
* Use uart1 interface to transfer one char
|
|
* Parameters : uint8 TxChar - character to tx
|
|
* Returns : OK
|
|
*******************************************************************************/
|
|
LOCAL STATUS
|
|
uart_tx_one_char(uint8 uart, uint8 TxChar)
|
|
{
|
|
while (true)
|
|
{
|
|
uint32 fifo_cnt = READ_PERI_REG(UART_STATUS(uart)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S);
|
|
if ((fifo_cnt >> UART_TXFIFO_CNT_S & UART_TXFIFO_CNT) < 126) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
WRITE_PERI_REG(UART_FIFO(uart) , TxChar);
|
|
return OK;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart1_write_char
|
|
* Description : Internal used function
|
|
* Do some special deal while tx char is '\r' or '\n'
|
|
* Parameters : char c - character to tx
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
LOCAL void ICACHE_FLASH_ATTR
|
|
uart1_write_char(char c)
|
|
{
|
|
if (c == '\n')
|
|
{
|
|
uart_tx_one_char(UART1, '\r');
|
|
uart_tx_one_char(UART1, '\n');
|
|
}
|
|
else if (c == '\r')
|
|
{
|
|
}
|
|
else
|
|
{
|
|
uart_tx_one_char(UART1, c);
|
|
}
|
|
}
|
|
/******************************************************************************
|
|
* FunctionName : uart0_tx_buffer
|
|
* Description : use uart0 to transfer buffer
|
|
* Parameters : uint8 *buf - point to send buffer
|
|
* uint16 len - buffer len
|
|
* Returns :
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
uart0_tx_buffer(uint8 *buf, uint16 len)
|
|
{
|
|
uint16 i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
{
|
|
uart_tx_one_char(UART0, buf[i]);
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart0_sendStr
|
|
* Description : use uart0 to transfer buffer
|
|
* Parameters : uint8 *buf - point to send buffer
|
|
* uint16 len - buffer len
|
|
* Returns :
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
uart0_sendStr(const char *str)
|
|
{
|
|
while(*str)
|
|
{
|
|
uart_tx_one_char(UART0, *str++);
|
|
}
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart0_rx_intr_handler
|
|
* Description : Internal used function
|
|
* UART0 interrupt handler, add self handle code inside
|
|
* Parameters : void *para - point to ETS_UART_INTR_ATTACH's arg
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
|
|
extern void charrx( uint8_t c );
|
|
|
|
LOCAL void
|
|
uart0_rx_intr_handler(void *para)
|
|
{
|
|
static uint8_t history[4];
|
|
static uint8_t hhead;
|
|
|
|
uint8 uart_no = UART0;//UartDev.buff_uart_no;
|
|
volatile uint8_t v = READ_PERI_REG(UART_FIFO(uart_no)) & 0xFF;
|
|
WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_RXFIFO_FULL_INT_CLR);
|
|
|
|
history[hhead++] = v;
|
|
if( hhead > 3 ) hhead = 0;
|
|
|
|
//Detect a request to reboot into bootloader.
|
|
if( history[hhead&3] == 0xc2 && history[(hhead+1)&3] == 0x42 && history[(hhead+2)&3] == 0x56 && history[(hhead+3)&3] == 0xff )
|
|
{
|
|
system_restart();
|
|
}
|
|
|
|
charrx( v );
|
|
|
|
}
|
|
|
|
/******************************************************************************
|
|
* FunctionName : uart_init
|
|
* Description : user interface for init uart
|
|
* Parameters : UartBautRate uart0_br - uart0 bautrate
|
|
* UartBautRate uart1_br - uart1 bautrate
|
|
* Returns : NONE
|
|
*******************************************************************************/
|
|
void ICACHE_FLASH_ATTR
|
|
uart_init(UartBautRate uart0_br, UartBautRate uart1_br)
|
|
{
|
|
// rom use 74880 baut_rate, here reinitialize
|
|
UartDev.baut_rate = uart0_br;
|
|
uart_config(UART0);
|
|
UartDev.baut_rate = uart1_br;
|
|
uart_config(UART1);
|
|
ETS_UART_INTR_ENABLE();
|
|
|
|
// install uart1 putc callback
|
|
os_install_putc1((void *)uart1_write_char);
|
|
}
|
|
|
|
void ICACHE_FLASH_ATTR
|
|
uart_reattach()
|
|
{
|
|
uart_init(BIT_RATE_74880, BIT_RATE_74880);
|
|
}
|