Update for voice and input

karaoke/default.conf

@@ -0,0 +1,118 @@
+# This is the configuration file for colorchord.
+# Most values are already defaulted in the software.
+# This file is constantly checked for new versions.
+# \r, and ; are used as terminators, so you can put
+# multiple entries on the same line.
+
+
+
+###########################################################################
+# Composer-specific stuff
+
+rawfilename = fount.raw
+initmapper_width_hz = 120
+octaves = 6
+sound_map_mux = 10
+freqbins = 48
+
+# Should we use a progressive DFT?
+# 0 = DFT Quick
+# 1 = DFT Progressive
+# 2 = DFT Progressive Integer	
+# 3 = DFT Progressive Integer Skippy
+# 4 = Integer, 32-Bit, Progressive, Skippy.
+do_progressive_dft = 4
+
+
+
+###########################################################################
+# Default stuff.
+
+#Whether to limit the control loop to ~60ish FPS.
+cpu_autolimit = 1
+
+#General GUI properties.
+title = PA Test
+set_screenx = 720
+set_screeny = 480
+
+#Sound properties.
+buffer = 384
+play = 0
+rec = 1
+channels = 2
+samplerate = 44100
+wininput = 0
+
+#Compiled version will default this.
+#sound_source = PULSE
+#-1 indicates left and right, 0 left, 1 right.
+
+sample_channel = -1
+sourcename = default
+#alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
+#default
+# alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
+#alsa_output.pci-0000_00_1f.3.analog-stereo.monitor << New laptop
+#use pactl list | grep pci-
+
+##################################
+# General ColorChord properties. #
+##################################
+
+# How much to amplify the incoming signal.
+amplify = 2.0
+
+# What is the base note?  I.e. the lowest note. 
+# Note that it won't have very much impact until an octave up though!
+base_hz = 55.0000
+
+# This is only used when dealing with the slow decompose (now defunct)
+# decompose_iterations = 1000
+# default_sigma = 1.4000
+
+# DFT properties for the DFT up top.
+dft_iir = 0.6
+dft_speedup = 1000.0000
+#octaves = 5
+
+
+
+filter_iter = 2
+filter_strength = .5
+
+# How many bins per octave to use?
+
+# For the final note information... How much to slack everything?
+note_attach_amp_iir = 0.3500
+note_attach_amp_iir2 = 0.250
+note_attach_freq_iir = 0.3000
+
+#How many bins a note can jump from frame to frame to be considered a slide.
+#this is used to prevent notes from popping in and out a lot.
+note_combine_distance = 0.5000
+note_jumpability = 1.8000
+note_minimum_new_distribution_value = 0.0200
+note_out_chop = 0.05000
+
+#compress_coefficient = 4.0
+#compress_exponent = .5
+
+
+#=======================================================================
+#Outputs
+
+
+#This is a vornoi thing: 
+outdrivers = #OutputVoronoi, DisplayArray
+lightx = 64
+lighty = 32
+fromsides = 1
+shape_cutoff = 0.03
+satamp = 5.000
+amppow = 2.510
+distpow = 1.500
+
+
+
+