I am on my way with this, but it's going slowly.
This commit is contained in:
cnlohr
parent
202a67326a
commit
518d69c0aa
18 changed files with 998 additions and 0 deletions
247
embedded8266/driver/uart.c
Normal file
247
embedded8266/driver/uart.c
Normal file
|
|
@ -0,0 +1,247 @@
|
|||
/******************************************************************************
|
||||
* Copyright 2013-2014 Espressif Systems (Wuxi)
|
||||
*
|
||||
* FileName: uart.c
|
||||
*
|
||||
* Description: Two UART mode configration and interrupt handler.
|
||||
* Check your hardware connection while use this mode.
|
||||
*
|
||||
* Modification history:
|
||||
* 2014/3/12, v1.0 create this file.
|
||||
*******************************************************************************/
|
||||
#include <osapi.h>
|
||||
#include <ets_sys.h>
|
||||
#include <driver/uart.h>
|
||||
|
||||
#include <driver/uart_register.h>
|
||||
//#include "ssc.h"
|
||||
//#include "at.h"
|
||||
|
||||
// UartDev is defined and initialized in rom code.
|
||||
extern UartDevice UartDev;
|
||||
//extern os_event_t at_recvTaskQueue[at_recvTaskQueueLen];
|
||||
|
||||
LOCAL void uart0_rx_intr_handler(void *para);
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart_config
|
||||
* Description : Internal used function
|
||||
* UART0 used for data TX/RX, RX buffer size is 0x100, interrupt enabled
|
||||
* UART1 just used for debug output
|
||||
* Parameters : uart_no, use UART0 or UART1 defined ahead
|
||||
* Returns : NONE
|
||||
*******************************************************************************/
|
||||
LOCAL void ICACHE_FLASH_ATTR
|
||||
uart_config(uint8 uart_no)
|
||||
{
|
||||
if (uart_no == UART1)
|
||||
{
|
||||
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_U1TXD_BK);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* rcv_buff size if 0x100 */
|
||||
ETS_UART_INTR_ATTACH(uart0_rx_intr_handler, &(UartDev.rcv_buff));
|
||||
PIN_PULLUP_DIS(PERIPHS_IO_MUX_U0TXD_U);
|
||||
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_U0TXD);
|
||||
// PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDO_U, FUNC_U0RTS);
|
||||
}
|
||||
|
||||
uart_div_modify(uart_no, UART_CLK_FREQ / (UartDev.baut_rate));
|
||||
|
||||
WRITE_PERI_REG(UART_CONF0(uart_no), UartDev.exist_parity
|
||||
| UartDev.parity
|
||||
| (UartDev.stop_bits << UART_STOP_BIT_NUM_S)
|
||||
| (UartDev.data_bits << UART_BIT_NUM_S));
|
||||
|
||||
//clear rx and tx fifo,not ready
|
||||
SET_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
||||
CLEAR_PERI_REG_MASK(UART_CONF0(uart_no), UART_RXFIFO_RST | UART_TXFIFO_RST);
|
||||
|
||||
//set rx fifo trigger
|
||||
// WRITE_PERI_REG(UART_CONF1(uart_no),
|
||||
// ((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
|
||||
// ((96 & UART_TXFIFO_EMPTY_THRHD) << UART_TXFIFO_EMPTY_THRHD_S) |
|
||||
// UART_RX_FLOW_EN);
|
||||
if (uart_no == UART0)
|
||||
{
|
||||
//set rx fifo trigger
|
||||
WRITE_PERI_REG(UART_CONF1(uart_no),
|
||||
((0x01 & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S) |
|
||||
((0x01 & UART_RX_FLOW_THRHD) << UART_RX_FLOW_THRHD_S) |
|
||||
UART_RX_FLOW_EN);
|
||||
}
|
||||
else
|
||||
{
|
||||
WRITE_PERI_REG(UART_CONF1(uart_no),
|
||||
((UartDev.rcv_buff.TrigLvl & UART_RXFIFO_FULL_THRHD) << UART_RXFIFO_FULL_THRHD_S));
|
||||
}
|
||||
|
||||
//clear all interrupt
|
||||
WRITE_PERI_REG(UART_INT_CLR(uart_no), 0xffff);
|
||||
//enable rx_interrupt
|
||||
SET_PERI_REG_MASK(UART_INT_ENA(uart_no), UART_RXFIFO_FULL_INT_ENA);
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart1_tx_one_char
|
||||
* Description : Internal used function
|
||||
* Use uart1 interface to transfer one char
|
||||
* Parameters : uint8 TxChar - character to tx
|
||||
* Returns : OK
|
||||
*******************************************************************************/
|
||||
LOCAL STATUS
|
||||
uart_tx_one_char(uint8 uart, uint8 TxChar)
|
||||
{
|
||||
while (true)
|
||||
{
|
||||
uint32 fifo_cnt = READ_PERI_REG(UART_STATUS(uart)) & (UART_TXFIFO_CNT<<UART_TXFIFO_CNT_S);
|
||||
if ((fifo_cnt >> UART_TXFIFO_CNT_S & UART_TXFIFO_CNT) < 126) {
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
WRITE_PERI_REG(UART_FIFO(uart) , TxChar);
|
||||
return OK;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart1_write_char
|
||||
* Description : Internal used function
|
||||
* Do some special deal while tx char is '\r' or '\n'
|
||||
* Parameters : char c - character to tx
|
||||
* Returns : NONE
|
||||
*******************************************************************************/
|
||||
LOCAL void ICACHE_FLASH_ATTR
|
||||
uart1_write_char(char c)
|
||||
{
|
||||
if (c == '\n')
|
||||
{
|
||||
uart_tx_one_char(UART1, '\r');
|
||||
uart_tx_one_char(UART1, '\n');
|
||||
}
|
||||
else if (c == '\r')
|
||||
{
|
||||
}
|
||||
else
|
||||
{
|
||||
uart_tx_one_char(UART1, c);
|
||||
}
|
||||
}
|
||||
/******************************************************************************
|
||||
* FunctionName : uart0_tx_buffer
|
||||
* Description : use uart0 to transfer buffer
|
||||
* Parameters : uint8 *buf - point to send buffer
|
||||
* uint16 len - buffer len
|
||||
* Returns :
|
||||
*******************************************************************************/
|
||||
void ICACHE_FLASH_ATTR
|
||||
uart0_tx_buffer(uint8 *buf, uint16 len)
|
||||
{
|
||||
uint16 i;
|
||||
|
||||
for (i = 0; i < len; i++)
|
||||
{
|
||||
uart_tx_one_char(UART0, buf[i]);
|
||||
}
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart0_sendStr
|
||||
* Description : use uart0 to transfer buffer
|
||||
* Parameters : uint8 *buf - point to send buffer
|
||||
* uint16 len - buffer len
|
||||
* Returns :
|
||||
*******************************************************************************/
|
||||
void ICACHE_FLASH_ATTR
|
||||
uart0_sendStr(const char *str)
|
||||
{
|
||||
while(*str)
|
||||
{
|
||||
uart_tx_one_char(UART0, *str++);
|
||||
}
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart0_rx_intr_handler
|
||||
* Description : Internal used function
|
||||
* UART0 interrupt handler, add self handle code inside
|
||||
* Parameters : void *para - point to ETS_UART_INTR_ATTACH's arg
|
||||
* Returns : NONE
|
||||
*******************************************************************************/
|
||||
extern void at_recvTask(void);
|
||||
|
||||
LOCAL void
|
||||
uart0_rx_intr_handler(void *para)
|
||||
{
|
||||
/* uart0 and uart1 intr combine togther, when interrupt occur, see reg 0x3ff20020, bit2, bit0 represents
|
||||
* uart1 and uart0 respectively
|
||||
*/
|
||||
// RcvMsgBuff *pRxBuff = (RcvMsgBuff *)para;
|
||||
// uint8 RcvChar;
|
||||
uint8 uart_no = UART0;//UartDev.buff_uart_no;
|
||||
|
||||
// if (UART_RXFIFO_FULL_INT_ST != (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_FULL_INT_ST))
|
||||
// {
|
||||
// return;
|
||||
// }
|
||||
if (UART_RXFIFO_FULL_INT_ST == (READ_PERI_REG(UART_INT_ST(uart_no)) & UART_RXFIFO_FULL_INT_ST))
|
||||
{
|
||||
at_recvTask();
|
||||
WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_RXFIFO_FULL_INT_CLR);
|
||||
}
|
||||
|
||||
// WRITE_PERI_REG(UART_INT_CLR(uart_no), UART_RXFIFO_FULL_INT_CLR);
|
||||
|
||||
// if (READ_PERI_REG(UART_STATUS(uart_no)) & (UART_RXFIFO_CNT << UART_RXFIFO_CNT_S))
|
||||
// {
|
||||
// RcvChar = READ_PERI_REG(UART_FIFO(uart_no)) & 0xFF;
|
||||
// at_recvTask();
|
||||
// *(pRxBuff->pWritePos) = RcvChar;
|
||||
|
||||
// system_os_post(at_recvTaskPrio, NULL, RcvChar);
|
||||
|
||||
// //insert here for get one command line from uart
|
||||
// if (RcvChar == '\r')
|
||||
// {
|
||||
// pRxBuff->BuffState = WRITE_OVER;
|
||||
// }
|
||||
//
|
||||
// pRxBuff->pWritePos++;
|
||||
//
|
||||
// if (pRxBuff->pWritePos == (pRxBuff->pRcvMsgBuff + RX_BUFF_SIZE))
|
||||
// {
|
||||
// // overflow ...we may need more error handle here.
|
||||
// pRxBuff->pWritePos = pRxBuff->pRcvMsgBuff ;
|
||||
// }
|
||||
// }
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* FunctionName : uart_init
|
||||
* Description : user interface for init uart
|
||||
* Parameters : UartBautRate uart0_br - uart0 bautrate
|
||||
* UartBautRate uart1_br - uart1 bautrate
|
||||
* Returns : NONE
|
||||
*******************************************************************************/
|
||||
void ICACHE_FLASH_ATTR
|
||||
uart_init(UartBautRate uart0_br, UartBautRate uart1_br)
|
||||
{
|
||||
// rom use 74880 baut_rate, here reinitialize
|
||||
UartDev.baut_rate = uart0_br;
|
||||
uart_config(UART0);
|
||||
UartDev.baut_rate = uart1_br;
|
||||
uart_config(UART1);
|
||||
ETS_UART_INTR_ENABLE();
|
||||
|
||||
// install uart1 putc callback
|
||||
os_install_putc1((void *)uart1_write_char);
|
||||
}
|
||||
|
||||
void ICACHE_FLASH_ATTR
|
||||
uart_reattach()
|
||||
{
|
||||
uart_init(BIT_RATE_74880, BIT_RATE_74880);
|
||||
// ETS_UART_INTR_ATTACH(uart_rx_intr_handler_ssc, &(UartDev.rcv_buff));
|
||||
// ETS_UART_INTR_ENABLE();
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue