fruchti/colorchord
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Add a STM32F407 version of EmbeddedColorChord

Browse source
This commit is contained in:
cnlohr 2015-07-20 21:22:19 -04:00
parent 91d8502d23
commit 3c885c8877
101 changed files with 73637 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

178
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/misc.h Normal file
View file

@ -0,0 +1,178 @@
/**
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MISC_H
#define __MISC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup MISC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief NVIC Init Structure definition
*/
typedef struct
{
uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
This parameter can be an enumerator of @ref IRQn_Type
enumeration (For the complete STM32 Devices IRQ Channels
list, please refer to stm32f4xx.h file) */
uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
specified in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
in NVIC_IRQChannel. This parameter can be a value
between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
A lower priority value indicates a higher priority */
FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
will be enabled or disabled.
This parameter can be set either to ENABLE or DISABLE */
} NVIC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup MISC_Exported_Constants
* @{
*/
/** @defgroup MISC_Vector_Table_Base
* @{
*/
#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
((VECTTAB) == NVIC_VectTab_FLASH))
/**
* @}
*/
/** @defgroup MISC_System_Low_Power
* @{
*/
#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
((LP) == NVIC_LP_SLEEPDEEP) || \
((LP) == NVIC_LP_SLEEPONEXIT))
/**
* @}
*/
/** @defgroup MISC_Preemption_Priority_Group
* @{
*/
#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
4 bits for subpriority */
#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
3 bits for subpriority */
#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
2 bits for subpriority */
#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
1 bits for subpriority */
#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
0 bits for subpriority */
#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
((GROUP) == NVIC_PriorityGroup_1) || \
((GROUP) == NVIC_PriorityGroup_2) || \
((GROUP) == NVIC_PriorityGroup_3) || \
((GROUP) == NVIC_PriorityGroup_4))
#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
/**
* @}
*/
/** @defgroup MISC_SysTick_clock_source
* @{
*/
#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
((SOURCE) == SysTick_CLKSource_HCLK_Div8))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
#ifdef __cplusplus
}
#endif
#endif /* __MISC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

656
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_adc.h Normal file
View file

@ -0,0 +1,656 @@
/**
******************************************************************************
* @file stm32f4xx_adc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_ADC_H
#define __STM32F4xx_ADC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup ADC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief ADC Init structure definition
*/
typedef struct
{
uint32_t ADC_Resolution; /*!< Configures the ADC resolution dual mode.
This parameter can be a value of @ref ADC_resolution */
FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion
is performed in Scan (multichannels)
or Single (one channel) mode.
This parameter can be set to ENABLE or DISABLE */
FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion
is performed in Continuous or Single mode.
This parameter can be set to ENABLE or DISABLE. */
uint32_t ADC_ExternalTrigConvEdge; /*!< Select the external trigger edge and
enable the trigger of a regular group.
This parameter can be a value of
@ref ADC_external_trigger_edge_for_regular_channels_conversion */
uint32_t ADC_ExternalTrigConv; /*!< Select the external event used to trigger
the start of conversion of a regular group.
This parameter can be a value of
@ref ADC_extrenal_trigger_sources_for_regular_channels_conversion */
uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment
is left or right. This parameter can be
a value of @ref ADC_data_align */
uint8_t ADC_NbrOfConversion; /*!< Specifies the number of ADC conversions
that will be done using the sequencer for
regular channel group.
This parameter must range from 1 to 16. */
}ADC_InitTypeDef;
/**
* @brief ADC Common Init structure definition
*/
typedef struct
{
uint32_t ADC_Mode; /*!< Configures the ADC to operate in
independent or multi mode.
This parameter can be a value of @ref ADC_Common_mode */
uint32_t ADC_Prescaler; /*!< Select the frequency of the clock
to the ADC. The clock is common for all the ADCs.
This parameter can be a value of @ref ADC_Prescaler */
uint32_t ADC_DMAAccessMode; /*!< Configures the Direct memory access
mode for multi ADC mode.
This parameter can be a value of
@ref ADC_Direct_memory_access_mode_for_multi_mode */
uint32_t ADC_TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
This parameter can be a value of
@ref ADC_delay_between_2_sampling_phases */
}ADC_CommonInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup ADC_Exported_Constants
* @{
*/
#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
((PERIPH) == ADC2) || \
((PERIPH) == ADC3))
/** @defgroup ADC_Common_mode
* @{
*/
#define ADC_Mode_Independent ((uint32_t)0x00000000)
#define ADC_DualMode_RegSimult_InjecSimult ((uint32_t)0x00000001)
#define ADC_DualMode_RegSimult_AlterTrig ((uint32_t)0x00000002)
#define ADC_DualMode_InjecSimult ((uint32_t)0x00000005)
#define ADC_DualMode_RegSimult ((uint32_t)0x00000006)
#define ADC_DualMode_Interl ((uint32_t)0x00000007)
#define ADC_DualMode_AlterTrig ((uint32_t)0x00000009)
#define ADC_TripleMode_RegSimult_InjecSimult ((uint32_t)0x00000011)
#define ADC_TripleMode_RegSimult_AlterTrig ((uint32_t)0x00000012)
#define ADC_TripleMode_InjecSimult ((uint32_t)0x00000015)
#define ADC_TripleMode_RegSimult ((uint32_t)0x00000016)
#define ADC_TripleMode_Interl ((uint32_t)0x00000017)
#define ADC_TripleMode_AlterTrig ((uint32_t)0x00000019)
#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
((MODE) == ADC_DualMode_RegSimult_InjecSimult) || \
((MODE) == ADC_DualMode_RegSimult_AlterTrig) || \
((MODE) == ADC_DualMode_InjecSimult) || \
((MODE) == ADC_DualMode_RegSimult) || \
((MODE) == ADC_DualMode_Interl) || \
((MODE) == ADC_DualMode_AlterTrig) || \
((MODE) == ADC_TripleMode_RegSimult_InjecSimult) || \
((MODE) == ADC_TripleMode_RegSimult_AlterTrig) || \
((MODE) == ADC_TripleMode_InjecSimult) || \
((MODE) == ADC_TripleMode_RegSimult) || \
((MODE) == ADC_TripleMode_Interl) || \
((MODE) == ADC_TripleMode_AlterTrig))
/**
* @}
*/
/** @defgroup ADC_Prescaler
* @{
*/
#define ADC_Prescaler_Div2 ((uint32_t)0x00000000)
#define ADC_Prescaler_Div4 ((uint32_t)0x00010000)
#define ADC_Prescaler_Div6 ((uint32_t)0x00020000)
#define ADC_Prescaler_Div8 ((uint32_t)0x00030000)
#define IS_ADC_PRESCALER(PRESCALER) (((PRESCALER) == ADC_Prescaler_Div2) || \
((PRESCALER) == ADC_Prescaler_Div4) || \
((PRESCALER) == ADC_Prescaler_Div6) || \
((PRESCALER) == ADC_Prescaler_Div8))
/**
* @}
*/
/** @defgroup ADC_Direct_memory_access_mode_for_multi_mode
* @{
*/
#define ADC_DMAAccessMode_Disabled ((uint32_t)0x00000000) /* DMA mode disabled */
#define ADC_DMAAccessMode_1 ((uint32_t)0x00004000) /* DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
#define ADC_DMAAccessMode_2 ((uint32_t)0x00008000) /* DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
#define ADC_DMAAccessMode_3 ((uint32_t)0x0000C000) /* DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAAccessMode_Disabled) || \
((MODE) == ADC_DMAAccessMode_1) || \
((MODE) == ADC_DMAAccessMode_2) || \
((MODE) == ADC_DMAAccessMode_3))
/**
* @}
*/
/** @defgroup ADC_delay_between_2_sampling_phases
* @{
*/
#define ADC_TwoSamplingDelay_5Cycles ((uint32_t)0x00000000)
#define ADC_TwoSamplingDelay_6Cycles ((uint32_t)0x00000100)
#define ADC_TwoSamplingDelay_7Cycles ((uint32_t)0x00000200)
#define ADC_TwoSamplingDelay_8Cycles ((uint32_t)0x00000300)
#define ADC_TwoSamplingDelay_9Cycles ((uint32_t)0x00000400)
#define ADC_TwoSamplingDelay_10Cycles ((uint32_t)0x00000500)
#define ADC_TwoSamplingDelay_11Cycles ((uint32_t)0x00000600)
#define ADC_TwoSamplingDelay_12Cycles ((uint32_t)0x00000700)
#define ADC_TwoSamplingDelay_13Cycles ((uint32_t)0x00000800)
#define ADC_TwoSamplingDelay_14Cycles ((uint32_t)0x00000900)
#define ADC_TwoSamplingDelay_15Cycles ((uint32_t)0x00000A00)
#define ADC_TwoSamplingDelay_16Cycles ((uint32_t)0x00000B00)
#define ADC_TwoSamplingDelay_17Cycles ((uint32_t)0x00000C00)
#define ADC_TwoSamplingDelay_18Cycles ((uint32_t)0x00000D00)
#define ADC_TwoSamplingDelay_19Cycles ((uint32_t)0x00000E00)
#define ADC_TwoSamplingDelay_20Cycles ((uint32_t)0x00000F00)
#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TwoSamplingDelay_5Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_6Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_7Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_8Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_9Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_10Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_11Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_12Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_13Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_14Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_15Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_16Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_17Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_18Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_19Cycles) || \
((DELAY) == ADC_TwoSamplingDelay_20Cycles))
/**
* @}
*/
/** @defgroup ADC_resolution
* @{
*/
#define ADC_Resolution_12b ((uint32_t)0x00000000)
#define ADC_Resolution_10b ((uint32_t)0x01000000)
#define ADC_Resolution_8b ((uint32_t)0x02000000)
#define ADC_Resolution_6b ((uint32_t)0x03000000)
#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_Resolution_12b) || \
((RESOLUTION) == ADC_Resolution_10b) || \
((RESOLUTION) == ADC_Resolution_8b) || \
((RESOLUTION) == ADC_Resolution_6b))
/**
* @}
*/
/** @defgroup ADC_external_trigger_edge_for_regular_channels_conversion
* @{
*/
#define ADC_ExternalTrigConvEdge_None ((uint32_t)0x00000000)
#define ADC_ExternalTrigConvEdge_Rising ((uint32_t)0x10000000)
#define ADC_ExternalTrigConvEdge_Falling ((uint32_t)0x20000000)
#define ADC_ExternalTrigConvEdge_RisingFalling ((uint32_t)0x30000000)
#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigConvEdge_None) || \
((EDGE) == ADC_ExternalTrigConvEdge_Rising) || \
((EDGE) == ADC_ExternalTrigConvEdge_Falling) || \
((EDGE) == ADC_ExternalTrigConvEdge_RisingFalling))
/**
* @}
*/
/** @defgroup ADC_extrenal_trigger_sources_for_regular_channels_conversion
* @{
*/
#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000)
#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x01000000)
#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x02000000)
#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x03000000)
#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x04000000)
#define ADC_ExternalTrigConv_T2_CC4 ((uint32_t)0x05000000)
#define ADC_ExternalTrigConv_T2_TRGO ((uint32_t)0x06000000)
#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x07000000)
#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x08000000)
#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x09000000)
#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x0A000000)
#define ADC_ExternalTrigConv_T5_CC2 ((uint32_t)0x0B000000)
#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x0C000000)
#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x0D000000)
#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x0E000000)
#define ADC_ExternalTrigConv_Ext_IT11 ((uint32_t)0x0F000000)
#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
((REGTRIG) == ADC_ExternalTrigConv_T2_CC4) || \
((REGTRIG) == ADC_ExternalTrigConv_T2_TRGO) || \
((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
((REGTRIG) == ADC_ExternalTrigConv_T5_CC2) || \
((REGTRIG) == ADC_ExternalTrigConv_T5_CC3) || \
((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11))
/**
* @}
*/
/** @defgroup ADC_data_align
* @{
*/
#define ADC_DataAlign_Right ((uint32_t)0x00000000)
#define ADC_DataAlign_Left ((uint32_t)0x00000800)
#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
((ALIGN) == ADC_DataAlign_Left))
/**
* @}
*/
/** @defgroup ADC_channels
* @{
*/
#define ADC_Channel_0 ((uint8_t)0x00)
#define ADC_Channel_1 ((uint8_t)0x01)
#define ADC_Channel_2 ((uint8_t)0x02)
#define ADC_Channel_3 ((uint8_t)0x03)
#define ADC_Channel_4 ((uint8_t)0x04)
#define ADC_Channel_5 ((uint8_t)0x05)
#define ADC_Channel_6 ((uint8_t)0x06)
#define ADC_Channel_7 ((uint8_t)0x07)
#define ADC_Channel_8 ((uint8_t)0x08)
#define ADC_Channel_9 ((uint8_t)0x09)
#define ADC_Channel_10 ((uint8_t)0x0A)
#define ADC_Channel_11 ((uint8_t)0x0B)
#define ADC_Channel_12 ((uint8_t)0x0C)
#define ADC_Channel_13 ((uint8_t)0x0D)
#define ADC_Channel_14 ((uint8_t)0x0E)
#define ADC_Channel_15 ((uint8_t)0x0F)
#define ADC_Channel_16 ((uint8_t)0x10)
#define ADC_Channel_17 ((uint8_t)0x11)
#define ADC_Channel_18 ((uint8_t)0x12)
#if defined (STM32F40_41xxx)
#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
#endif /* STM32F40_41xxx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F401xx) || defined (STM32F411xE)
#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_18)
#endif /* STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
#define ADC_Channel_Vbat ((uint8_t)ADC_Channel_18)
#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || \
((CHANNEL) == ADC_Channel_1) || \
((CHANNEL) == ADC_Channel_2) || \
((CHANNEL) == ADC_Channel_3) || \
((CHANNEL) == ADC_Channel_4) || \
((CHANNEL) == ADC_Channel_5) || \
((CHANNEL) == ADC_Channel_6) || \
((CHANNEL) == ADC_Channel_7) || \
((CHANNEL) == ADC_Channel_8) || \
((CHANNEL) == ADC_Channel_9) || \
((CHANNEL) == ADC_Channel_10) || \
((CHANNEL) == ADC_Channel_11) || \
((CHANNEL) == ADC_Channel_12) || \
((CHANNEL) == ADC_Channel_13) || \
((CHANNEL) == ADC_Channel_14) || \
((CHANNEL) == ADC_Channel_15) || \
((CHANNEL) == ADC_Channel_16) || \
((CHANNEL) == ADC_Channel_17) || \
((CHANNEL) == ADC_Channel_18))
/**
* @}
*/
/** @defgroup ADC_sampling_times
* @{
*/
#define ADC_SampleTime_3Cycles ((uint8_t)0x00)
#define ADC_SampleTime_15Cycles ((uint8_t)0x01)
#define ADC_SampleTime_28Cycles ((uint8_t)0x02)
#define ADC_SampleTime_56Cycles ((uint8_t)0x03)
#define ADC_SampleTime_84Cycles ((uint8_t)0x04)
#define ADC_SampleTime_112Cycles ((uint8_t)0x05)
#define ADC_SampleTime_144Cycles ((uint8_t)0x06)
#define ADC_SampleTime_480Cycles ((uint8_t)0x07)
#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_3Cycles) || \
((TIME) == ADC_SampleTime_15Cycles) || \
((TIME) == ADC_SampleTime_28Cycles) || \
((TIME) == ADC_SampleTime_56Cycles) || \
((TIME) == ADC_SampleTime_84Cycles) || \
((TIME) == ADC_SampleTime_112Cycles) || \
((TIME) == ADC_SampleTime_144Cycles) || \
((TIME) == ADC_SampleTime_480Cycles))
/**
* @}
*/
/** @defgroup ADC_external_trigger_edge_for_injected_channels_conversion
* @{
*/
#define ADC_ExternalTrigInjecConvEdge_None ((uint32_t)0x00000000)
#define ADC_ExternalTrigInjecConvEdge_Rising ((uint32_t)0x00100000)
#define ADC_ExternalTrigInjecConvEdge_Falling ((uint32_t)0x00200000)
#define ADC_ExternalTrigInjecConvEdge_RisingFalling ((uint32_t)0x00300000)
#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigInjecConvEdge_None) || \
((EDGE) == ADC_ExternalTrigInjecConvEdge_Rising) || \
((EDGE) == ADC_ExternalTrigInjecConvEdge_Falling) || \
((EDGE) == ADC_ExternalTrigInjecConvEdge_RisingFalling))
/**
* @}
*/
/** @defgroup ADC_extrenal_trigger_sources_for_injected_channels_conversion
* @{
*/
#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00000000)
#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00010000)
#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00020000)
#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00030000)
#define ADC_ExternalTrigInjecConv_T3_CC2 ((uint32_t)0x00040000)
#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00050000)
#define ADC_ExternalTrigInjecConv_T4_CC1 ((uint32_t)0x00060000)
#define ADC_ExternalTrigInjecConv_T4_CC2 ((uint32_t)0x00070000)
#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00080000)
#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00090000)
#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x000A0000)
#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x000B0000)
#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x000C0000)
#define ADC_ExternalTrigInjecConv_T8_CC3 ((uint32_t)0x000D0000)
#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x000E0000)
#define ADC_ExternalTrigInjecConv_Ext_IT15 ((uint32_t)0x000F0000)
#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC2) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC1) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC2) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC3) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15))
/**
* @}
*/
/** @defgroup ADC_injected_channel_selection
* @{
*/
#define ADC_InjectedChannel_1 ((uint8_t)0x14)
#define ADC_InjectedChannel_2 ((uint8_t)0x18)
#define ADC_InjectedChannel_3 ((uint8_t)0x1C)
#define ADC_InjectedChannel_4 ((uint8_t)0x20)
#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
((CHANNEL) == ADC_InjectedChannel_2) || \
((CHANNEL) == ADC_InjectedChannel_3) || \
((CHANNEL) == ADC_InjectedChannel_4))
/**
* @}
*/
/** @defgroup ADC_analog_watchdog_selection
* @{
*/
#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200)
#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200)
#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200)
#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000)
#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000)
#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000)
#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
((WATCHDOG) == ADC_AnalogWatchdog_None))
/**
* @}
*/
/** @defgroup ADC_interrupts_definition
* @{
*/
#define ADC_IT_EOC ((uint16_t)0x0205)
#define ADC_IT_AWD ((uint16_t)0x0106)
#define ADC_IT_JEOC ((uint16_t)0x0407)
#define ADC_IT_OVR ((uint16_t)0x201A)
#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR))
/**
* @}
*/
/** @defgroup ADC_flags_definition
* @{
*/
#define ADC_FLAG_AWD ((uint8_t)0x01)
#define ADC_FLAG_EOC ((uint8_t)0x02)
#define ADC_FLAG_JEOC ((uint8_t)0x04)
#define ADC_FLAG_JSTRT ((uint8_t)0x08)
#define ADC_FLAG_STRT ((uint8_t)0x10)
#define ADC_FLAG_OVR ((uint8_t)0x20)
#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xC0) == 0x00) && ((FLAG) != 0x00))
#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || \
((FLAG) == ADC_FLAG_EOC) || \
((FLAG) == ADC_FLAG_JEOC) || \
((FLAG)== ADC_FLAG_JSTRT) || \
((FLAG) == ADC_FLAG_STRT) || \
((FLAG)== ADC_FLAG_OVR))
/**
* @}
*/
/** @defgroup ADC_thresholds
* @{
*/
#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
/**
* @}
*/
/** @defgroup ADC_injected_offset
* @{
*/
#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
/**
* @}
*/
/** @defgroup ADC_injected_length
* @{
*/
#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
/**
* @}
*/
/** @defgroup ADC_injected_rank
* @{
*/
#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
/**
* @}
*/
/** @defgroup ADC_regular_length
* @{
*/
#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
/**
* @}
*/
/** @defgroup ADC_regular_rank
* @{
*/
#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
/**
* @}
*/
/** @defgroup ADC_regular_discontinuous_mode_number
* @{
*/
#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the ADC configuration to the default reset state *****/
void ADC_DeInit(void);
/* Initialization and Configuration functions *********************************/
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct);
void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct);
void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
/* Analog Watchdog configuration functions ************************************/
void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,uint16_t LowThreshold);
void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
/* Temperature Sensor, Vrefint and VBAT management functions ******************/
void ADC_TempSensorVrefintCmd(FunctionalState NewState);
void ADC_VBATCmd(FunctionalState NewState);
/* Regular Channels Configuration functions ***********************************/
void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
void ADC_SoftwareStartConv(ADC_TypeDef* ADCx);
FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
uint32_t ADC_GetMultiModeConversionValue(void);
/* Regular Channels DMA Configuration functions *******************************/
void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
void ADC_MultiModeDMARequestAfterLastTransferCmd(FunctionalState NewState);
/* Injected channels Configuration functions **********************************/
void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge);
void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx);
FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
/* Interrupts and flags management functions **********************************/
void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_ADC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

644
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_can.h Normal file
View file

@ -0,0 +1,644 @@
/**
******************************************************************************
* @file stm32f4xx_can.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the CAN firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_CAN_H
#define __STM32F4xx_CAN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CAN
* @{
*/
/* Exported types ------------------------------------------------------------*/
#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
((PERIPH) == CAN2))
/**
* @brief CAN init structure definition
*/
typedef struct
{
uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum.
It ranges from 1 to 1024. */
uint8_t CAN_Mode; /*!< Specifies the CAN operating mode.
This parameter can be a value of @ref CAN_operating_mode */
uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta
the CAN hardware is allowed to lengthen or
shorten a bit to perform resynchronization.
This parameter can be a value of @ref CAN_synchronisation_jump_width */
uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit
Segment 1. This parameter can be a value of
@ref CAN_time_quantum_in_bit_segment_1 */
uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode.
This parameter can be set either to ENABLE or DISABLE. */
FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management.
This parameter can be set either to ENABLE or DISABLE. */
FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode.
This parameter can be set either to ENABLE or DISABLE. */
FunctionalState CAN_NART; /*!< Enable or disable the non-automatic retransmission mode.
This parameter can be set either to ENABLE or DISABLE. */
FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
This parameter can be set either to ENABLE or DISABLE. */
FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority.
This parameter can be set either to ENABLE or DISABLE. */
} CAN_InitTypeDef;
/**
* @brief CAN filter init structure definition
*/
typedef struct
{
uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
configuration, first one for a 16-bit configuration).
This parameter can be a value between 0x0000 and 0xFFFF */
uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
configuration, second one for a 16-bit configuration).
This parameter can be a value between 0x0000 and 0xFFFF */
uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
according to the mode (MSBs for a 32-bit configuration,
first one for a 16-bit configuration).
This parameter can be a value between 0x0000 and 0xFFFF */
uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
according to the mode (LSBs for a 32-bit configuration,
second one for a 16-bit configuration).
This parameter can be a value between 0x0000 and 0xFFFF */
uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
This parameter can be a value of @ref CAN_filter_FIFO */
uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized.
This parameter can be a value of @ref CAN_filter_mode */
uint8_t CAN_FilterScale; /*!< Specifies the filter scale.
This parameter can be a value of @ref CAN_filter_scale */
FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
This parameter can be set either to ENABLE or DISABLE. */
} CAN_FilterInitTypeDef;
/**
* @brief CAN Tx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter can be a value between 0 to 0x7FF. */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter can be a value between 0 to 0x1FFFFFFF. */
uint8_t IDE; /*!< Specifies the type of identifier for the message that
will be transmitted. This parameter can be a value
of @ref CAN_identifier_type */
uint8_t RTR; /*!< Specifies the type of frame for the message that will
be transmitted. This parameter can be a value of
@ref CAN_remote_transmission_request */
uint8_t DLC; /*!< Specifies the length of the frame that will be
transmitted. This parameter can be a value between
0 to 8 */
uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0
to 0xFF. */
} CanTxMsg;
/**
* @brief CAN Rx message structure definition
*/
typedef struct
{
uint32_t StdId; /*!< Specifies the standard identifier.
This parameter can be a value between 0 to 0x7FF. */
uint32_t ExtId; /*!< Specifies the extended identifier.
This parameter can be a value between 0 to 0x1FFFFFFF. */
uint8_t IDE; /*!< Specifies the type of identifier for the message that
will be received. This parameter can be a value of
@ref CAN_identifier_type */
uint8_t RTR; /*!< Specifies the type of frame for the received message.
This parameter can be a value of
@ref CAN_remote_transmission_request */
uint8_t DLC; /*!< Specifies the length of the frame that will be received.
This parameter can be a value between 0 to 8 */
uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to
0xFF. */
uint8_t FMI; /*!< Specifies the index of the filter the message stored in
the mailbox passes through. This parameter can be a
value between 0 to 0xFF */
} CanRxMsg;
/* Exported constants --------------------------------------------------------*/
/** @defgroup CAN_Exported_Constants
* @{
*/
/** @defgroup CAN_InitStatus
* @{
*/
#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */
#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */
/* Legacy defines */
#define CANINITFAILED CAN_InitStatus_Failed
#define CANINITOK CAN_InitStatus_Success
/**
* @}
*/
/** @defgroup CAN_operating_mode
* @{
*/
#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */
#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */
#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */
#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */
#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
((MODE) == CAN_Mode_LoopBack)|| \
((MODE) == CAN_Mode_Silent) || \
((MODE) == CAN_Mode_Silent_LoopBack))
/**
* @}
*/
/**
* @defgroup CAN_operating_mode
* @{
*/
#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */
#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */
#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */
#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
((MODE) == CAN_OperatingMode_Normal)|| \
((MODE) == CAN_OperatingMode_Sleep))
/**
* @}
*/
/**
* @defgroup CAN_operating_mode_status
* @{
*/
#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */
#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */
/**
* @}
*/
/** @defgroup CAN_synchronisation_jump_width
* @{
*/
#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */
#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */
#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */
#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_1
* @{
*/
#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */
#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */
#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */
#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */
#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */
#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */
#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */
#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */
#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */
#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */
#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */
#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */
#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */
#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */
#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */
#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */
#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
/**
* @}
*/
/** @defgroup CAN_time_quantum_in_bit_segment_2
* @{
*/
#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */
#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */
#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */
#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */
#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */
#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */
#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */
#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */
#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
/**
* @}
*/
/** @defgroup CAN_clock_prescaler
* @{
*/
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
/**
* @}
*/
/** @defgroup CAN_filter_number
* @{
*/
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
/**
* @}
*/
/** @defgroup CAN_filter_mode
* @{
*/
#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */
#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
((MODE) == CAN_FilterMode_IdList))
/**
* @}
*/
/** @defgroup CAN_filter_scale
* @{
*/
#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */
#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
((SCALE) == CAN_FilterScale_32bit))
/**
* @}
*/
/** @defgroup CAN_filter_FIFO
* @{
*/
#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
((FIFO) == CAN_FilterFIFO1))
/* Legacy defines */
#define CAN_FilterFIFO0 CAN_Filter_FIFO0
#define CAN_FilterFIFO1 CAN_Filter_FIFO1
/**
* @}
*/
/** @defgroup CAN_Start_bank_filter_for_slave_CAN
* @{
*/
#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
/**
* @}
*/
/** @defgroup CAN_Tx
* @{
*/
#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
/**
* @}
*/
/** @defgroup CAN_identifier_type
* @{
*/
#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */
#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
((IDTYPE) == CAN_Id_Extended))
/* Legacy defines */
#define CAN_ID_STD CAN_Id_Standard
#define CAN_ID_EXT CAN_Id_Extended
/**
* @}
*/
/** @defgroup CAN_remote_transmission_request
* @{
*/
#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */
#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
/* Legacy defines */
#define CAN_RTR_DATA CAN_RTR_Data
#define CAN_RTR_REMOTE CAN_RTR_Remote
/**
* @}
*/
/** @defgroup CAN_transmit_constants
* @{
*/
#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */
#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */
#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */
#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide
an empty mailbox */
/* Legacy defines */
#define CANTXFAILED CAN_TxStatus_Failed
#define CANTXOK CAN_TxStatus_Ok
#define CANTXPENDING CAN_TxStatus_Pending
#define CAN_NO_MB CAN_TxStatus_NoMailBox
/**
* @}
*/
/** @defgroup CAN_receive_FIFO_number_constants
* @{
*/
#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
/**
* @}
*/
/** @defgroup CAN_sleep_constants
* @{
*/
#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */
/* Legacy defines */
#define CANSLEEPFAILED CAN_Sleep_Failed
#define CANSLEEPOK CAN_Sleep_Ok
/**
* @}
*/
/** @defgroup CAN_wake_up_constants
* @{
*/
#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
/* Legacy defines */
#define CANWAKEUPFAILED CAN_WakeUp_Failed
#define CANWAKEUPOK CAN_WakeUp_Ok
/**
* @}
*/
/**
* @defgroup CAN_Error_Code_constants
* @{
*/
#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */
#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */
#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */
#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */
#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */
#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */
#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */
#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */
/**
* @}
*/
/** @defgroup CAN_flags
* @{
*/
/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
and CAN_ClearFlag() functions. */
/* If the flag is 0x1XXXXXXX, it means that it can only be used with
CAN_GetFlagStatus() function. */
/* Transmit Flags */
#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
/* Receive Flags */
#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */
#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */
#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */
#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */
/* Operating Mode Flags */
#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */
#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
In this case the SLAK bit can be polled.*/
/* Error Flags */
#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */
#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */
#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */
#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */
#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \
((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \
((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
((FLAG) == CAN_FLAG_SLAK ))
#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\
((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
/**
* @}
*/
/** @defgroup CAN_interrupts
* @{
*/
#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
/* Receive Interrupts */
#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
/* Operating Mode Interrupts */
#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
/* Error Interrupts */
#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/
/* Flags named as Interrupts : kept only for FW compatibility */
#define CAN_IT_RQCP0 CAN_IT_TME
#define CAN_IT_RQCP1 CAN_IT_TME
#define CAN_IT_RQCP2 CAN_IT_TME
#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the CAN configuration to the default reset state *****/
void CAN_DeInit(CAN_TypeDef* CANx);
/* Initialization and Configuration functions *********************************/
uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
void CAN_SlaveStartBank(uint8_t CAN_BankNumber);
void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
/* CAN Frames Transmission functions ******************************************/
uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
/* CAN Frames Reception functions *********************************************/
void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
/* Operation modes functions **************************************************/
uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
uint8_t CAN_Sleep(CAN_TypeDef* CANx);
uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
/* CAN Bus Error management functions *****************************************/
uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
/* Interrupts and flags management functions **********************************/
void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_CAN_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

302
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_cec.h Normal file
View file

@ -0,0 +1,302 @@
/**
******************************************************************************
* @file stm32f4xx_cec.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the CEC firmware
* library, applicable only for STM32F466xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4XX_CEC_H
#define __STM32F4XX_CEC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CEC
* @{
*/
#if defined(STM32F446xx)
/* Exported types ------------------------------------------------------------*/
/**
* @brief CEC Init structure definition
*/
typedef struct
{
uint32_t CEC_SignalFreeTime; /*!< Specifies the CEC Signal Free Time configuration.
This parameter can be a value of @ref CEC_Signal_Free_Time */
uint32_t CEC_RxTolerance; /*!< Specifies the CEC Reception Tolerance.
This parameter can be a value of @ref CEC_RxTolerance */
uint32_t CEC_StopReception; /*!< Specifies the CEC Stop Reception.
This parameter can be a value of @ref CEC_Stop_Reception */
uint32_t CEC_BitRisingError; /*!< Specifies the CEC Bit Rising Error generation.
This parameter can be a value of @ref CEC_Bit_Rising_Error_Generation */
uint32_t CEC_LongBitPeriodError; /*!< Specifies the CEC Long Bit Error generation.
This parameter can be a value of @ref CEC_Long_Bit_Error_Generation */
uint32_t CEC_BRDNoGen; /*!< Specifies the CEC Broadcast Error generation.
This parameter can be a value of @ref CEC_BDR_No_Gen */
uint32_t CEC_SFTOption; /*!< Specifies the CEC Signal Free Time option.
This parameter can be a value of @ref CEC_SFT_Option */
}CEC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup CEC_Exported_Constants
* @{
*/
/** @defgroup CEC_Signal_Free_Time
* @{
*/
#define CEC_SignalFreeTime_Standard ((uint32_t)0x00000000) /*!< CEC Signal Free Time Standard */
#define CEC_SignalFreeTime_1T ((uint32_t)0x00000001) /*!< CEC 1.5 nominal data bit periods */
#define CEC_SignalFreeTime_2T ((uint32_t)0x00000002) /*!< CEC 2.5 nominal data bit periods */
#define CEC_SignalFreeTime_3T ((uint32_t)0x00000003) /*!< CEC 3.5 nominal data bit periods */
#define CEC_SignalFreeTime_4T ((uint32_t)0x00000004) /*!< CEC 4.5 nominal data bit periods */
#define CEC_SignalFreeTime_5T ((uint32_t)0x00000005) /*!< CEC 5.5 nominal data bit periods */
#define CEC_SignalFreeTime_6T ((uint32_t)0x00000006) /*!< CEC 6.5 nominal data bit periods */
#define CEC_SignalFreeTime_7T ((uint32_t)0x00000007) /*!< CEC 7.5 nominal data bit periods */
#define IS_CEC_SIGNAL_FREE_TIME(TIME) (((TIME) == CEC_SignalFreeTime_Standard) || \
((TIME) == CEC_SignalFreeTime_1T)|| \
((TIME) == CEC_SignalFreeTime_2T)|| \
((TIME) == CEC_SignalFreeTime_3T)|| \
((TIME) == CEC_SignalFreeTime_4T)|| \
((TIME) == CEC_SignalFreeTime_5T)|| \
((TIME) == CEC_SignalFreeTime_6T)|| \
((TIME) == CEC_SignalFreeTime_7T))
/**
* @}
*/
/** @defgroup CEC_RxTolerance
* @{
*/
#define CEC_RxTolerance_Standard ((uint32_t)0x00000000) /*!< Standard Tolerance Margin */
#define CEC_RxTolerance_Extended CEC_CFGR_RXTOL /*!< Extended Tolerance Margin */
#define IS_CEC_RX_TOLERANCE(TOLERANCE) (((TOLERANCE) == CEC_RxTolerance_Standard) || \
((TOLERANCE) == CEC_RxTolerance_Extended))
/**
* @}
*/
/** @defgroup CEC_Stop_Reception
* @{
*/
#define CEC_StopReception_Off ((uint32_t)0x00000000) /*!< No RX Stop on bit Rising Error (BRE) */
#define CEC_StopReception_On CEC_CFGR_BRESTP /*!< RX Stop on bit Rising Error (BRE) */
#define IS_CEC_STOP_RECEPTION(RECEPTION) (((RECEPTION) == CEC_StopReception_On) || \
((RECEPTION) == CEC_StopReception_Off))
/**
* @}
*/
/** @defgroup CEC_Bit_Rising_Error_Generation
* @{
*/
#define CEC_BitRisingError_Off ((uint32_t)0x00000000) /*!< Bit Rising Error generation turned Off */
#define CEC_BitRisingError_On CEC_CFGR_BREGEN /*!< Bit Rising Error generation turned On */
#define IS_CEC_BIT_RISING_ERROR(ERROR) (((ERROR) == CEC_BitRisingError_Off) || \
((ERROR) == CEC_BitRisingError_On))
/**
* @}
*/
/** @defgroup CEC_Long_Bit_Error_Generation
* @{
*/
#define CEC_LongBitPeriodError_Off ((uint32_t)0x00000000) /*!< Long Bit Period Error generation turned Off */
#define CEC_LongBitPeriodError_On CEC_CFGR_LREGEN /*!< Long Bit Period Error generation turned On */
#define IS_CEC_LONG_BIT_PERIOD_ERROR(ERROR) (((ERROR) == CEC_LongBitPeriodError_Off) || \
((ERROR) == CEC_LongBitPeriodError_On))
/**
* @}
*/
/** @defgroup CEC_BDR_No_Gen
* @{
*/
#define CEC_BRDNoGen_Off ((uint32_t)0x00000000) /*!< Broadcast Bit Rising Error generation turned Off */
#define CEC_BRDNoGen_On CEC_CFGR_BRDNOGEN /*!< Broadcast Bit Rising Error generation turned On */
#define IS_CEC_BDR_NO_GEN_ERROR(ERROR) (((ERROR) == CEC_BRDNoGen_Off) || \
((ERROR) == CEC_BRDNoGen_On))
/**
* @}
*/
/** @defgroup CEC_SFT_Option
* @{
*/
#define CEC_SFTOption_Off ((uint32_t)0x00000000) /*!< SFT option turned Off */
#define CEC_SFTOption_On CEC_CFGR_SFTOPT /*!< SFT option turned On */
#define IS_CEC_SFT_OPTION(OPTION) (((OPTION) == CEC_SFTOption_Off) || \
((OPTION) == CEC_SFTOption_On))
/**
* @}
*/
/** @defgroup CEC_Own_Address
* @{
*/
#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
/**
* @}
*/
/** @defgroup CEC_Interrupt_Configuration_definition
* @{
*/
#define CEC_IT_TXACKE CEC_IER_TXACKEIE
#define CEC_IT_TXERR CEC_IER_TXERRIE
#define CEC_IT_TXUDR CEC_IER_TXUDRIE
#define CEC_IT_TXEND CEC_IER_TXENDIE
#define CEC_IT_TXBR CEC_IER_TXBRIE
#define CEC_IT_ARBLST CEC_IER_ARBLSTIE
#define CEC_IT_RXACKE CEC_IER_RXACKEIE
#define CEC_IT_LBPE CEC_IER_LBPEIE
#define CEC_IT_SBPE CEC_IER_SBPEIE
#define CEC_IT_BRE CEC_IER_BREIEIE
#define CEC_IT_RXOVR CEC_IER_RXOVRIE
#define CEC_IT_RXEND CEC_IER_RXENDIE
#define CEC_IT_RXBR CEC_IER_RXBRIE
#define IS_CEC_IT(IT) ((((IT) & (uint32_t)0xFFFFE000) == 0x00) && ((IT) != 0x00))
#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TXACKE) || \
((IT) == CEC_IT_TXERR)|| \
((IT) == CEC_IT_TXUDR)|| \
((IT) == CEC_IT_TXEND)|| \
((IT) == CEC_IT_TXBR)|| \
((IT) == CEC_IT_ARBLST)|| \
((IT) == CEC_IT_RXACKE)|| \
((IT) == CEC_IT_LBPE)|| \
((IT) == CEC_IT_SBPE)|| \
((IT) == CEC_IT_BRE)|| \
((IT) == CEC_IT_RXOVR)|| \
((IT) == CEC_IT_RXEND)|| \
((IT) == CEC_IT_RXBR))
/**
* @}
*/
/** @defgroup CEC_ISR_register_flags_definition
* @{
*/
#define CEC_FLAG_TXACKE CEC_ISR_TXACKE
#define CEC_FLAG_TXERR CEC_ISR_TXERR
#define CEC_FLAG_TXUDR CEC_ISR_TXUDR
#define CEC_FLAG_TXEND CEC_ISR_TXEND
#define CEC_FLAG_TXBR CEC_ISR_TXBR
#define CEC_FLAG_ARBLST CEC_ISR_ARBLST
#define CEC_FLAG_RXACKE CEC_ISR_RXACKE
#define CEC_FLAG_LBPE CEC_ISR_LBPE
#define CEC_FLAG_SBPE CEC_ISR_SBPE
#define CEC_FLAG_BRE CEC_ISR_BRE
#define CEC_FLAG_RXOVR CEC_ISR_RXOVR
#define CEC_FLAG_RXEND CEC_ISR_RXEND
#define CEC_FLAG_RXBR CEC_ISR_RXBR
#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFE000) == 0x00) && ((FLAG) != 0x00))
#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_TXACKE) || \
((FLAG) == CEC_FLAG_TXERR)|| \
((FLAG) == CEC_FLAG_TXUDR)|| \
((FLAG) == CEC_FLAG_TXEND)|| \
((FLAG) == CEC_FLAG_TXBR)|| \
((FLAG) == CEC_FLAG_ARBLST)|| \
((FLAG) == CEC_FLAG_RXACKE)|| \
((FLAG) == CEC_FLAG_LBPE)|| \
((FLAG) == CEC_FLAG_SBPE)|| \
((FLAG) == CEC_FLAG_BRE)|| \
((FLAG) == CEC_FLAG_RXOVR)|| \
((FLAG) == CEC_FLAG_RXEND)|| \
((FLAG) == CEC_FLAG_RXBR))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the CEC configuration to the default reset state *****/
void CEC_DeInit(void);
/* CEC_Initialization and Configuration functions *****************************/
void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
void CEC_StructInit(CEC_InitTypeDef* CEC_InitStruct);
void CEC_Cmd(FunctionalState NewState);
void CEC_ListenModeCmd(FunctionalState NewState);
void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
void CEC_OwnAddressClear(void);
/* CEC_Data transfers functions ***********************************************/
void CEC_SendData(uint8_t Data);
uint8_t CEC_ReceiveData(void);
void CEC_StartOfMessage(void);
void CEC_EndOfMessage(void);
/* CEC_Interrupts and flags management functions ******************************/
void CEC_ITConfig(uint16_t CEC_IT, FunctionalState NewState);
FlagStatus CEC_GetFlagStatus(uint16_t CEC_FLAG);
void CEC_ClearFlag(uint32_t CEC_FLAG);
ITStatus CEC_GetITStatus(uint16_t CEC_IT);
void CEC_ClearITPendingBit(uint16_t CEC_IT);
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4XX_CEC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

83
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_crc.h Normal file
View file

@ -0,0 +1,83 @@
/**
******************************************************************************
* @file stm32f4xx_crc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_CRC_H
#define __STM32F4xx_CRC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRC_Exported_Constants
* @{
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void CRC_ResetDR(void);
uint32_t CRC_CalcCRC(uint32_t Data);
uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
uint32_t CRC_GetCRC(void);
void CRC_SetIDRegister(uint8_t IDValue);
uint8_t CRC_GetIDRegister(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_CRC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

384
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_cryp.h Normal file
View file

@ -0,0 +1,384 @@
/**
******************************************************************************
* @file stm32f4xx_cryp.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the Cryptographic
* processor(CRYP) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_CRYP_H
#define __STM32F4xx_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup CRYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief CRYP Init structure definition
*/
typedef struct
{
uint32_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a
value of @ref CRYP_Algorithm_Direction */
uint32_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB,
AES-CBC, AES-CTR, AES-Key, AES-GCM and AES-CCM.
This parameter can be a value of @ref CRYP_Algorithm_Mode */
uint32_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit string.
This parameter can be a value of @ref CRYP_Data_Type */
uint32_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit
key length. This parameter can be a value of
@ref CRYP_Key_Size_for_AES_only */
}CRYP_InitTypeDef;
/**
* @brief CRYP Key(s) structure definition
*/
typedef struct
{
uint32_t CRYP_Key0Left; /*!< Key 0 Left */
uint32_t CRYP_Key0Right; /*!< Key 0 Right */
uint32_t CRYP_Key1Left; /*!< Key 1 left */
uint32_t CRYP_Key1Right; /*!< Key 1 Right */
uint32_t CRYP_Key2Left; /*!< Key 2 left */
uint32_t CRYP_Key2Right; /*!< Key 2 Right */
uint32_t CRYP_Key3Left; /*!< Key 3 left */
uint32_t CRYP_Key3Right; /*!< Key 3 Right */
}CRYP_KeyInitTypeDef;
/**
* @brief CRYP Initialization Vectors (IV) structure definition
*/
typedef struct
{
uint32_t CRYP_IV0Left; /*!< Init Vector 0 Left */
uint32_t CRYP_IV0Right; /*!< Init Vector 0 Right */
uint32_t CRYP_IV1Left; /*!< Init Vector 1 left */
uint32_t CRYP_IV1Right; /*!< Init Vector 1 Right */
}CRYP_IVInitTypeDef;
/**
* @brief CRYP context swapping structure definition
*/
typedef struct
{
/*!< Current Configuration */
uint32_t CR_CurrentConfig;
/*!< IV */
uint32_t CRYP_IV0LR;
uint32_t CRYP_IV0RR;
uint32_t CRYP_IV1LR;
uint32_t CRYP_IV1RR;
/*!< KEY */
uint32_t CRYP_K0LR;
uint32_t CRYP_K0RR;
uint32_t CRYP_K1LR;
uint32_t CRYP_K1RR;
uint32_t CRYP_K2LR;
uint32_t CRYP_K2RR;
uint32_t CRYP_K3LR;
uint32_t CRYP_K3RR;
uint32_t CRYP_CSGCMCCMR[8];
uint32_t CRYP_CSGCMR[8];
}CRYP_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants
* @{
*/
/** @defgroup CRYP_Algorithm_Direction
* @{
*/
#define CRYP_AlgoDir_Encrypt ((uint16_t)0x0000)
#define CRYP_AlgoDir_Decrypt ((uint16_t)0x0004)
#define IS_CRYP_ALGODIR(ALGODIR) (((ALGODIR) == CRYP_AlgoDir_Encrypt) || \
((ALGODIR) == CRYP_AlgoDir_Decrypt))
/**
* @}
*/
/** @defgroup CRYP_Algorithm_Mode
* @{
*/
/*!< TDES Modes */
#define CRYP_AlgoMode_TDES_ECB ((uint32_t)0x00000000)
#define CRYP_AlgoMode_TDES_CBC ((uint32_t)0x00000008)
/*!< DES Modes */
#define CRYP_AlgoMode_DES_ECB ((uint32_t)0x00000010)
#define CRYP_AlgoMode_DES_CBC ((uint32_t)0x00000018)
/*!< AES Modes */
#define CRYP_AlgoMode_AES_ECB ((uint32_t)0x00000020)
#define CRYP_AlgoMode_AES_CBC ((uint32_t)0x00000028)
#define CRYP_AlgoMode_AES_CTR ((uint32_t)0x00000030)
#define CRYP_AlgoMode_AES_Key ((uint32_t)0x00000038)
#define CRYP_AlgoMode_AES_GCM ((uint32_t)0x00080000)
#define CRYP_AlgoMode_AES_CCM ((uint32_t)0x00080008)
#define IS_CRYP_ALGOMODE(ALGOMODE) (((ALGOMODE) == CRYP_AlgoMode_TDES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_TDES_CBC)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_DES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CTR) || \
((ALGOMODE) == CRYP_AlgoMode_AES_Key) || \
((ALGOMODE) == CRYP_AlgoMode_AES_GCM) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CCM))
/**
* @}
*/
/** @defgroup CRYP_Phase
* @{
*/
/*!< The phases are valid only for AES-GCM and AES-CCM modes */
#define CRYP_Phase_Init ((uint32_t)0x00000000)
#define CRYP_Phase_Header CRYP_CR_GCM_CCMPH_0
#define CRYP_Phase_Payload CRYP_CR_GCM_CCMPH_1
#define CRYP_Phase_Final CRYP_CR_GCM_CCMPH
#define IS_CRYP_PHASE(PHASE) (((PHASE) == CRYP_Phase_Init) || \
((PHASE) == CRYP_Phase_Header) || \
((PHASE) == CRYP_Phase_Payload) || \
((PHASE) == CRYP_Phase_Final))
/**
* @}
*/
/** @defgroup CRYP_Data_Type
* @{
*/
#define CRYP_DataType_32b ((uint16_t)0x0000)
#define CRYP_DataType_16b ((uint16_t)0x0040)
#define CRYP_DataType_8b ((uint16_t)0x0080)
#define CRYP_DataType_1b ((uint16_t)0x00C0)
#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DataType_32b) || \
((DATATYPE) == CRYP_DataType_16b)|| \
((DATATYPE) == CRYP_DataType_8b)|| \
((DATATYPE) == CRYP_DataType_1b))
/**
* @}
*/
/** @defgroup CRYP_Key_Size_for_AES_only
* @{
*/
#define CRYP_KeySize_128b ((uint16_t)0x0000)
#define CRYP_KeySize_192b ((uint16_t)0x0100)
#define CRYP_KeySize_256b ((uint16_t)0x0200)
#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KeySize_128b)|| \
((KEYSIZE) == CRYP_KeySize_192b)|| \
((KEYSIZE) == CRYP_KeySize_256b))
/**
* @}
*/
/** @defgroup CRYP_flags_definition
* @{
*/
#define CRYP_FLAG_BUSY ((uint8_t)0x10) /*!< The CRYP core is currently
processing a block of data
or a key preparation (for
AES decryption). */
#define CRYP_FLAG_IFEM ((uint8_t)0x01) /*!< Input Fifo Empty */
#define CRYP_FLAG_IFNF ((uint8_t)0x02) /*!< Input Fifo is Not Full */
#define CRYP_FLAG_INRIS ((uint8_t)0x22) /*!< Raw interrupt pending */
#define CRYP_FLAG_OFNE ((uint8_t)0x04) /*!< Input Fifo service raw
interrupt status */
#define CRYP_FLAG_OFFU ((uint8_t)0x08) /*!< Output Fifo is Full */
#define CRYP_FLAG_OUTRIS ((uint8_t)0x21) /*!< Output Fifo service raw
interrupt status */
#define IS_CRYP_GET_FLAG(FLAG) (((FLAG) == CRYP_FLAG_IFEM) || \
((FLAG) == CRYP_FLAG_IFNF) || \
((FLAG) == CRYP_FLAG_OFNE) || \
((FLAG) == CRYP_FLAG_OFFU) || \
((FLAG) == CRYP_FLAG_BUSY) || \
((FLAG) == CRYP_FLAG_OUTRIS)|| \
((FLAG) == CRYP_FLAG_INRIS))
/**
* @}
*/
/** @defgroup CRYP_interrupts_definition
* @{
*/
#define CRYP_IT_INI ((uint8_t)0x01) /*!< IN Fifo Interrupt */
#define CRYP_IT_OUTI ((uint8_t)0x02) /*!< OUT Fifo Interrupt */
#define IS_CRYP_CONFIG_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_CRYP_GET_IT(IT) (((IT) == CRYP_IT_INI) || ((IT) == CRYP_IT_OUTI))
/**
* @}
*/
/** @defgroup CRYP_Encryption_Decryption_modes_definition
* @{
*/
#define MODE_ENCRYPT ((uint8_t)0x01)
#define MODE_DECRYPT ((uint8_t)0x00)
/**
* @}
*/
/** @defgroup CRYP_DMA_transfer_requests
* @{
*/
#define CRYP_DMAReq_DataIN ((uint8_t)0x01)
#define CRYP_DMAReq_DataOUT ((uint8_t)0x02)
#define IS_CRYP_DMAREQ(DMAREQ) ((((DMAREQ) & (uint8_t)0xFC) == 0x00) && ((DMAREQ) != 0x00))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the CRYP configuration to the default reset state ****/
void CRYP_DeInit(void);
/* CRYP Initialization and Configuration functions ****************************/
void CRYP_Init(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_StructInit(CRYP_InitTypeDef* CRYP_InitStruct);
void CRYP_KeyInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_Cmd(FunctionalState NewState);
void CRYP_PhaseConfig(uint32_t CRYP_Phase);
void CRYP_FIFOFlush(void);
/* CRYP Data processing functions *********************************************/
void CRYP_DataIn(uint32_t Data);
uint32_t CRYP_DataOut(void);
/* CRYP Context swapping functions ********************************************/
ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave,
CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore);
/* CRYP DMA interface function ************************************************/
void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState);
ITStatus CRYP_GetITStatus(uint8_t CRYP_IT);
FunctionalState CRYP_GetCmdStatus(void);
FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG);
/* High Level AES functions **************************************************/
ErrorStatus CRYP_AES_ECB(uint8_t Mode,
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CBC(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_CTR(uint8_t Mode,
uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_GCM(uint8_t Mode, uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t ILength,
uint8_t *Header, uint32_t HLength,
uint8_t *Output, uint8_t *AuthTAG);
ErrorStatus CRYP_AES_CCM(uint8_t Mode,
uint8_t* Nonce, uint32_t NonceSize,
uint8_t* Key, uint16_t Keysize,
uint8_t* Input, uint32_t ILength,
uint8_t* Header, uint32_t HLength, uint8_t *HBuffer,
uint8_t* Output,
uint8_t* AuthTAG, uint32_t TAGSize);
/* High Level TDES functions **************************************************/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode,
uint8_t Key[24],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_TDES_CBC(uint8_t Mode,
uint8_t Key[24],
uint8_t InitVectors[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
/* High Level DES functions **************************************************/
ErrorStatus CRYP_DES_ECB(uint8_t Mode,
uint8_t Key[8],
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_DES_CBC(uint8_t Mode,
uint8_t Key[8],
uint8_t InitVectors[8],
uint8_t *Input,uint32_t Ilength,
uint8_t *Output);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_CRYP_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

304
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dac.h Normal file
View file

@ -0,0 +1,304 @@
/**
******************************************************************************
* @file stm32f4xx_dac.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DAC_H
#define __STM32F4xx_DAC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DAC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DAC Init structure definition
*/
typedef struct
{
uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
This parameter can be a value of @ref DAC_trigger_selection */
uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
are generated, or whether no wave is generated.
This parameter can be a value of @ref DAC_wave_generation */
uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
the maximum amplitude triangle generation for the DAC channel.
This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
This parameter can be a value of @ref DAC_output_buffer */
}DAC_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DAC_Exported_Constants
* @{
*/
/** @defgroup DAC_trigger_selection
* @{
*/
#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
has been loaded, and not by external trigger */
#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
((TRIGGER) == DAC_Trigger_T6_TRGO) || \
((TRIGGER) == DAC_Trigger_T8_TRGO) || \
((TRIGGER) == DAC_Trigger_T7_TRGO) || \
((TRIGGER) == DAC_Trigger_T5_TRGO) || \
((TRIGGER) == DAC_Trigger_T2_TRGO) || \
((TRIGGER) == DAC_Trigger_T4_TRGO) || \
((TRIGGER) == DAC_Trigger_Ext_IT9) || \
((TRIGGER) == DAC_Trigger_Software))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
((WAVE) == DAC_WaveGeneration_Noise) || \
((WAVE) == DAC_WaveGeneration_Triangle))
/**
* @}
*/
/** @defgroup DAC_lfsrunmask_triangleamplitude
* @{
*/
#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
((VALUE) == DAC_TriangleAmplitude_1) || \
((VALUE) == DAC_TriangleAmplitude_3) || \
((VALUE) == DAC_TriangleAmplitude_7) || \
((VALUE) == DAC_TriangleAmplitude_15) || \
((VALUE) == DAC_TriangleAmplitude_31) || \
((VALUE) == DAC_TriangleAmplitude_63) || \
((VALUE) == DAC_TriangleAmplitude_127) || \
((VALUE) == DAC_TriangleAmplitude_255) || \
((VALUE) == DAC_TriangleAmplitude_511) || \
((VALUE) == DAC_TriangleAmplitude_1023) || \
((VALUE) == DAC_TriangleAmplitude_2047) || \
((VALUE) == DAC_TriangleAmplitude_4095))
/**
* @}
*/
/** @defgroup DAC_output_buffer
* @{
*/
#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
((STATE) == DAC_OutputBuffer_Disable))
/**
* @}
*/
/** @defgroup DAC_Channel_selection
* @{
*/
#define DAC_Channel_1 ((uint32_t)0x00000000)
#define DAC_Channel_2 ((uint32_t)0x00000010)
#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
((CHANNEL) == DAC_Channel_2))
/**
* @}
*/
/** @defgroup DAC_data_alignement
* @{
*/
#define DAC_Align_12b_R ((uint32_t)0x00000000)
#define DAC_Align_12b_L ((uint32_t)0x00000004)
#define DAC_Align_8b_R ((uint32_t)0x00000008)
#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
((ALIGN) == DAC_Align_12b_L) || \
((ALIGN) == DAC_Align_8b_R))
/**
* @}
*/
/** @defgroup DAC_wave_generation
* @{
*/
#define DAC_Wave_Noise ((uint32_t)0x00000040)
#define DAC_Wave_Triangle ((uint32_t)0x00000080)
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
((WAVE) == DAC_Wave_Triangle))
/**
* @}
*/
/** @defgroup DAC_data
* @{
*/
#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
/**
* @}
*/
/** @defgroup DAC_interrupts_definition
* @{
*/
#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
/**
* @}
*/
/** @defgroup DAC_flags_definition
* @{
*/
#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DAC configuration to the default reset state *****/
void DAC_DeInit(void);
/* DAC channels configuration: trigger, output buffer, data format functions */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
/* DMA management functions ***************************************************/
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_DAC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

109
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dbgmcu.h Normal file
View file

@ -0,0 +1,109 @@
/**
******************************************************************************
* @file stm32f4xx_dbgmcu.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the DBGMCU firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DBGMCU_H
#define __STM32F4xx_DBGMCU_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DBGMCU
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DBGMCU_Exported_Constants
* @{
*/
#define DBGMCU_SLEEP ((uint32_t)0x00000001)
#define DBGMCU_STOP ((uint32_t)0x00000002)
#define DBGMCU_STANDBY ((uint32_t)0x00000004)
#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004)
#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008)
#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010)
#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020)
#define DBGMCU_TIM12_STOP ((uint32_t)0x00000040)
#define DBGMCU_TIM13_STOP ((uint32_t)0x00000080)
#define DBGMCU_TIM14_STOP ((uint32_t)0x00000100)
#define DBGMCU_RTC_STOP ((uint32_t)0x00000400)
#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800)
#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000)
#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
#define DBGMCU_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
#define DBGMCU_CAN1_STOP ((uint32_t)0x02000000)
#define DBGMCU_CAN2_STOP ((uint32_t)0x04000000)
#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xF91FE200) == 0x00) && ((PERIPH) != 0x00))
#define DBGMCU_TIM1_STOP ((uint32_t)0x00000001)
#define DBGMCU_TIM8_STOP ((uint32_t)0x00000002)
#define DBGMCU_TIM9_STOP ((uint32_t)0x00010000)
#define DBGMCU_TIM10_STOP ((uint32_t)0x00020000)
#define DBGMCU_TIM11_STOP ((uint32_t)0x00040000)
#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFF8FFFC) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
uint32_t DBGMCU_GetREVID(void);
uint32_t DBGMCU_GetDEVID(void);
void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_DBGMCU_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

312
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dcmi.h Normal file
View file

@ -0,0 +1,312 @@
/**
******************************************************************************
* @file stm32f4xx_dcmi.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the DCMI firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DCMI_H
#define __STM32F4xx_DCMI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DCMI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DCMI Init structure definition
*/
typedef struct
{
uint16_t DCMI_CaptureMode; /*!< Specifies the Capture Mode: Continuous or Snapshot.
This parameter can be a value of @ref DCMI_Capture_Mode */
uint16_t DCMI_SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
This parameter can be a value of @ref DCMI_Synchronization_Mode */
uint16_t DCMI_PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
This parameter can be a value of @ref DCMI_PIXCK_Polarity */
uint16_t DCMI_VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_VSYNC_Polarity */
uint16_t DCMI_HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
This parameter can be a value of @ref DCMI_HSYNC_Polarity */
uint16_t DCMI_CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
This parameter can be a value of @ref DCMI_Capture_Rate */
uint16_t DCMI_ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
This parameter can be a value of @ref DCMI_Extended_Data_Mode */
} DCMI_InitTypeDef;
/**
* @brief DCMI CROP Init structure definition
*/
typedef struct
{
uint16_t DCMI_VerticalStartLine; /*!< Specifies the Vertical start line count from which the image capture
will start. This parameter can be a value between 0x00 and 0x1FFF */
uint16_t DCMI_HorizontalOffsetCount; /*!< Specifies the number of pixel clocks to count before starting a capture.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_VerticalLineCount; /*!< Specifies the number of lines to be captured from the starting point.
This parameter can be a value between 0x00 and 0x3FFF */
uint16_t DCMI_CaptureCount; /*!< Specifies the number of pixel clocks to be captured from the starting
point on the same line.
This parameter can be a value between 0x00 and 0x3FFF */
} DCMI_CROPInitTypeDef;
/**
* @brief DCMI Embedded Synchronisation CODE Init structure definition
*/
typedef struct
{
uint8_t DCMI_FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
uint8_t DCMI_LineStartCode; /*!< Specifies the code of the line start delimiter. */
uint8_t DCMI_LineEndCode; /*!< Specifies the code of the line end delimiter. */
uint8_t DCMI_FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
} DCMI_CodesInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DCMI_Exported_Constants
* @{
*/
/** @defgroup DCMI_Capture_Mode
* @{
*/
#define DCMI_CaptureMode_Continuous ((uint16_t)0x0000) /*!< The received data are transferred continuously
into the destination memory through the DMA */
#define DCMI_CaptureMode_SnapShot ((uint16_t)0x0002) /*!< Once activated, the interface waits for the start of
frame and then transfers a single frame through the DMA */
#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_CaptureMode_Continuous) || \
((MODE) == DCMI_CaptureMode_SnapShot))
/**
* @}
*/
/** @defgroup DCMI_Synchronization_Mode
* @{
*/
#define DCMI_SynchroMode_Hardware ((uint16_t)0x0000) /*!< Hardware synchronization data capture (frame/line start/stop)
is synchronized with the HSYNC/VSYNC signals */
#define DCMI_SynchroMode_Embedded ((uint16_t)0x0010) /*!< Embedded synchronization data capture is synchronized with
synchronization codes embedded in the data flow */
#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SynchroMode_Hardware) || \
((MODE) == DCMI_SynchroMode_Embedded))
/**
* @}
*/
/** @defgroup DCMI_PIXCK_Polarity
* @{
*/
#define DCMI_PCKPolarity_Falling ((uint16_t)0x0000) /*!< Pixel clock active on Falling edge */
#define DCMI_PCKPolarity_Rising ((uint16_t)0x0020) /*!< Pixel clock active on Rising edge */
#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPolarity_Falling) || \
((POLARITY) == DCMI_PCKPolarity_Rising))
/**
* @}
*/
/** @defgroup DCMI_VSYNC_Polarity
* @{
*/
#define DCMI_VSPolarity_Low ((uint16_t)0x0000) /*!< Vertical synchronization active Low */
#define DCMI_VSPolarity_High ((uint16_t)0x0080) /*!< Vertical synchronization active High */
#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPolarity_Low) || \
((POLARITY) == DCMI_VSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_HSYNC_Polarity
* @{
*/
#define DCMI_HSPolarity_Low ((uint16_t)0x0000) /*!< Horizontal synchronization active Low */
#define DCMI_HSPolarity_High ((uint16_t)0x0040) /*!< Horizontal synchronization active High */
#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPolarity_Low) || \
((POLARITY) == DCMI_HSPolarity_High))
/**
* @}
*/
/** @defgroup DCMI_Capture_Rate
* @{
*/
#define DCMI_CaptureRate_All_Frame ((uint16_t)0x0000) /*!< All frames are captured */
#define DCMI_CaptureRate_1of2_Frame ((uint16_t)0x0100) /*!< Every alternate frame captured */
#define DCMI_CaptureRate_1of4_Frame ((uint16_t)0x0200) /*!< One frame in 4 frames captured */
#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CaptureRate_All_Frame) || \
((RATE) == DCMI_CaptureRate_1of2_Frame) ||\
((RATE) == DCMI_CaptureRate_1of4_Frame))
/**
* @}
*/
/** @defgroup DCMI_Extended_Data_Mode
* @{
*/
#define DCMI_ExtendedDataMode_8b ((uint16_t)0x0000) /*!< Interface captures 8-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_10b ((uint16_t)0x0400) /*!< Interface captures 10-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_12b ((uint16_t)0x0800) /*!< Interface captures 12-bit data on every pixel clock */
#define DCMI_ExtendedDataMode_14b ((uint16_t)0x0C00) /*!< Interface captures 14-bit data on every pixel clock */
#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_ExtendedDataMode_8b) || \
((DATA) == DCMI_ExtendedDataMode_10b) ||\
((DATA) == DCMI_ExtendedDataMode_12b) ||\
((DATA) == DCMI_ExtendedDataMode_14b))
/**
* @}
*/
/** @defgroup DCMI_interrupt_sources
* @{
*/
#define DCMI_IT_FRAME ((uint16_t)0x0001)
#define DCMI_IT_OVF ((uint16_t)0x0002)
#define DCMI_IT_ERR ((uint16_t)0x0004)
#define DCMI_IT_VSYNC ((uint16_t)0x0008)
#define DCMI_IT_LINE ((uint16_t)0x0010)
#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
((IT) == DCMI_IT_OVF) || \
((IT) == DCMI_IT_ERR) || \
((IT) == DCMI_IT_VSYNC) || \
((IT) == DCMI_IT_LINE))
/**
* @}
*/
/** @defgroup DCMI_Flags
* @{
*/
/**
* @brief DCMI SR register
*/
#define DCMI_FLAG_HSYNC ((uint16_t)0x2001)
#define DCMI_FLAG_VSYNC ((uint16_t)0x2002)
#define DCMI_FLAG_FNE ((uint16_t)0x2004)
/**
* @brief DCMI RISR register
*/
#define DCMI_FLAG_FRAMERI ((uint16_t)0x0001)
#define DCMI_FLAG_OVFRI ((uint16_t)0x0002)
#define DCMI_FLAG_ERRRI ((uint16_t)0x0004)
#define DCMI_FLAG_VSYNCRI ((uint16_t)0x0008)
#define DCMI_FLAG_LINERI ((uint16_t)0x0010)
/**
* @brief DCMI MISR register
*/
#define DCMI_FLAG_FRAMEMI ((uint16_t)0x1001)
#define DCMI_FLAG_OVFMI ((uint16_t)0x1002)
#define DCMI_FLAG_ERRMI ((uint16_t)0x1004)
#define DCMI_FLAG_VSYNCMI ((uint16_t)0x1008)
#define DCMI_FLAG_LINEMI ((uint16_t)0x1010)
#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
((FLAG) == DCMI_FLAG_VSYNC) || \
((FLAG) == DCMI_FLAG_FNE) || \
((FLAG) == DCMI_FLAG_FRAMERI) || \
((FLAG) == DCMI_FLAG_OVFRI) || \
((FLAG) == DCMI_FLAG_ERRRI) || \
((FLAG) == DCMI_FLAG_VSYNCRI) || \
((FLAG) == DCMI_FLAG_LINERI) || \
((FLAG) == DCMI_FLAG_FRAMEMI) || \
((FLAG) == DCMI_FLAG_OVFMI) || \
((FLAG) == DCMI_FLAG_ERRMI) || \
((FLAG) == DCMI_FLAG_VSYNCMI) || \
((FLAG) == DCMI_FLAG_LINEMI))
#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DCMI configuration to the default reset state ****/
void DCMI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void DCMI_Init(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_StructInit(DCMI_InitTypeDef* DCMI_InitStruct);
void DCMI_CROPConfig(DCMI_CROPInitTypeDef* DCMI_CROPInitStruct);
void DCMI_CROPCmd(FunctionalState NewState);
void DCMI_SetEmbeddedSynchroCodes(DCMI_CodesInitTypeDef* DCMI_CodesInitStruct);
void DCMI_JPEGCmd(FunctionalState NewState);
/* Image capture functions ****************************************************/
void DCMI_Cmd(FunctionalState NewState);
void DCMI_CaptureCmd(FunctionalState NewState);
uint32_t DCMI_ReadData(void);
/* Interrupts and flags management functions **********************************/
void DCMI_ITConfig(uint16_t DCMI_IT, FunctionalState NewState);
FlagStatus DCMI_GetFlagStatus(uint16_t DCMI_FLAG);
void DCMI_ClearFlag(uint16_t DCMI_FLAG);
ITStatus DCMI_GetITStatus(uint16_t DCMI_IT);
void DCMI_ClearITPendingBit(uint16_t DCMI_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_DCMI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

609
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dma.h Normal file
View file

@ -0,0 +1,609 @@
/**
******************************************************************************
* @file stm32f4xx_dma.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the DMA firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DMA_H
#define __STM32F4xx_DMA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DMA
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DMA Init structure definition
*/
typedef struct
{
uint32_t DMA_Channel; /*!< Specifies the channel used for the specified stream.
This parameter can be a value of @ref DMA_channel */
uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Streamx. */
uint32_t DMA_Memory0BaseAddr; /*!< Specifies the memory 0 base address for DMAy Streamx.
This memory is the default memory used when double buffer mode is
not enabled. */
uint32_t DMA_DIR; /*!< Specifies if the data will be transferred from memory to peripheral,
from memory to memory or from peripheral to memory.
This parameter can be a value of @ref DMA_data_transfer_direction */
uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Stream.
The data unit is equal to the configuration set in DMA_PeripheralDataSize
or DMA_MemoryDataSize members depending in the transfer direction. */
uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
This parameter can be a value of @ref DMA_peripheral_incremented_mode */
uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register should be incremented or not.
This parameter can be a value of @ref DMA_memory_incremented_mode */
uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
This parameter can be a value of @ref DMA_peripheral_data_size */
uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width.
This parameter can be a value of @ref DMA_memory_data_size */
uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Streamx.
This parameter can be a value of @ref DMA_circular_normal_mode
@note The circular buffer mode cannot be used if the memory-to-memory
data transfer is configured on the selected Stream */
uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Streamx.
This parameter can be a value of @ref DMA_priority_level */
uint32_t DMA_FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified Stream.
This parameter can be a value of @ref DMA_fifo_direct_mode
@note The Direct mode (FIFO mode disabled) cannot be used if the
memory-to-memory data transfer is configured on the selected Stream */
uint32_t DMA_FIFOThreshold; /*!< Specifies the FIFO threshold level.
This parameter can be a value of @ref DMA_fifo_threshold_level */
uint32_t DMA_MemoryBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
It specifies the amount of data to be transferred in a single non interruptable
transaction. This parameter can be a value of @ref DMA_memory_burst
@note The burst mode is possible only if the address Increment mode is enabled. */
uint32_t DMA_PeripheralBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
It specifies the amount of data to be transferred in a single non interruptable
transaction. This parameter can be a value of @ref DMA_peripheral_burst
@note The burst mode is possible only if the address Increment mode is enabled. */
}DMA_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA_Exported_Constants
* @{
*/
#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Stream0) || \
((PERIPH) == DMA1_Stream1) || \
((PERIPH) == DMA1_Stream2) || \
((PERIPH) == DMA1_Stream3) || \
((PERIPH) == DMA1_Stream4) || \
((PERIPH) == DMA1_Stream5) || \
((PERIPH) == DMA1_Stream6) || \
((PERIPH) == DMA1_Stream7) || \
((PERIPH) == DMA2_Stream0) || \
((PERIPH) == DMA2_Stream1) || \
((PERIPH) == DMA2_Stream2) || \
((PERIPH) == DMA2_Stream3) || \
((PERIPH) == DMA2_Stream4) || \
((PERIPH) == DMA2_Stream5) || \
((PERIPH) == DMA2_Stream6) || \
((PERIPH) == DMA2_Stream7))
#define IS_DMA_ALL_CONTROLLER(CONTROLLER) (((CONTROLLER) == DMA1) || \
((CONTROLLER) == DMA2))
/** @defgroup DMA_channel
* @{
*/
#define DMA_Channel_0 ((uint32_t)0x00000000)
#define DMA_Channel_1 ((uint32_t)0x02000000)
#define DMA_Channel_2 ((uint32_t)0x04000000)
#define DMA_Channel_3 ((uint32_t)0x06000000)
#define DMA_Channel_4 ((uint32_t)0x08000000)
#define DMA_Channel_5 ((uint32_t)0x0A000000)
#define DMA_Channel_6 ((uint32_t)0x0C000000)
#define DMA_Channel_7 ((uint32_t)0x0E000000)
#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_Channel_0) || \
((CHANNEL) == DMA_Channel_1) || \
((CHANNEL) == DMA_Channel_2) || \
((CHANNEL) == DMA_Channel_3) || \
((CHANNEL) == DMA_Channel_4) || \
((CHANNEL) == DMA_Channel_5) || \
((CHANNEL) == DMA_Channel_6) || \
((CHANNEL) == DMA_Channel_7))
/**
* @}
*/
/** @defgroup DMA_data_transfer_direction
* @{
*/
#define DMA_DIR_PeripheralToMemory ((uint32_t)0x00000000)
#define DMA_DIR_MemoryToPeripheral ((uint32_t)0x00000040)
#define DMA_DIR_MemoryToMemory ((uint32_t)0x00000080)
#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_DIR_PeripheralToMemory ) || \
((DIRECTION) == DMA_DIR_MemoryToPeripheral) || \
((DIRECTION) == DMA_DIR_MemoryToMemory))
/**
* @}
*/
/** @defgroup DMA_data_buffer_size
* @{
*/
#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
/**
* @}
*/
/** @defgroup DMA_peripheral_incremented_mode
* @{
*/
#define DMA_PeripheralInc_Enable ((uint32_t)0x00000200)
#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000)
#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
((STATE) == DMA_PeripheralInc_Disable))
/**
* @}
*/
/** @defgroup DMA_memory_incremented_mode
* @{
*/
#define DMA_MemoryInc_Enable ((uint32_t)0x00000400)
#define DMA_MemoryInc_Disable ((uint32_t)0x00000000)
#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
((STATE) == DMA_MemoryInc_Disable))
/**
* @}
*/
/** @defgroup DMA_peripheral_data_size
* @{
*/
#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000)
#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000800)
#define DMA_PeripheralDataSize_Word ((uint32_t)0x00001000)
#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
((SIZE) == DMA_PeripheralDataSize_Word))
/**
* @}
*/
/** @defgroup DMA_memory_data_size
* @{
*/
#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000)
#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00002000)
#define DMA_MemoryDataSize_Word ((uint32_t)0x00004000)
#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
((SIZE) == DMA_MemoryDataSize_HalfWord) || \
((SIZE) == DMA_MemoryDataSize_Word ))
/**
* @}
*/
/** @defgroup DMA_circular_normal_mode
* @{
*/
#define DMA_Mode_Normal ((uint32_t)0x00000000)
#define DMA_Mode_Circular ((uint32_t)0x00000100)
#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Normal ) || \
((MODE) == DMA_Mode_Circular))
/**
* @}
*/
/** @defgroup DMA_priority_level
* @{
*/
#define DMA_Priority_Low ((uint32_t)0x00000000)
#define DMA_Priority_Medium ((uint32_t)0x00010000)
#define DMA_Priority_High ((uint32_t)0x00020000)
#define DMA_Priority_VeryHigh ((uint32_t)0x00030000)
#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_Low ) || \
((PRIORITY) == DMA_Priority_Medium) || \
((PRIORITY) == DMA_Priority_High) || \
((PRIORITY) == DMA_Priority_VeryHigh))
/**
* @}
*/
/** @defgroup DMA_fifo_direct_mode
* @{
*/
#define DMA_FIFOMode_Disable ((uint32_t)0x00000000)
#define DMA_FIFOMode_Enable ((uint32_t)0x00000004)
#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMode_Disable ) || \
((STATE) == DMA_FIFOMode_Enable))
/**
* @}
*/
/** @defgroup DMA_fifo_threshold_level
* @{
*/
#define DMA_FIFOThreshold_1QuarterFull ((uint32_t)0x00000000)
#define DMA_FIFOThreshold_HalfFull ((uint32_t)0x00000001)
#define DMA_FIFOThreshold_3QuartersFull ((uint32_t)0x00000002)
#define DMA_FIFOThreshold_Full ((uint32_t)0x00000003)
#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFOThreshold_1QuarterFull ) || \
((THRESHOLD) == DMA_FIFOThreshold_HalfFull) || \
((THRESHOLD) == DMA_FIFOThreshold_3QuartersFull) || \
((THRESHOLD) == DMA_FIFOThreshold_Full))
/**
* @}
*/
/** @defgroup DMA_memory_burst
* @{
*/
#define DMA_MemoryBurst_Single ((uint32_t)0x00000000)
#define DMA_MemoryBurst_INC4 ((uint32_t)0x00800000)
#define DMA_MemoryBurst_INC8 ((uint32_t)0x01000000)
#define DMA_MemoryBurst_INC16 ((uint32_t)0x01800000)
#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MemoryBurst_Single) || \
((BURST) == DMA_MemoryBurst_INC4) || \
((BURST) == DMA_MemoryBurst_INC8) || \
((BURST) == DMA_MemoryBurst_INC16))
/**
* @}
*/
/** @defgroup DMA_peripheral_burst
* @{
*/
#define DMA_PeripheralBurst_Single ((uint32_t)0x00000000)
#define DMA_PeripheralBurst_INC4 ((uint32_t)0x00200000)
#define DMA_PeripheralBurst_INC8 ((uint32_t)0x00400000)
#define DMA_PeripheralBurst_INC16 ((uint32_t)0x00600000)
#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PeripheralBurst_Single) || \
((BURST) == DMA_PeripheralBurst_INC4) || \
((BURST) == DMA_PeripheralBurst_INC8) || \
((BURST) == DMA_PeripheralBurst_INC16))
/**
* @}
*/
/** @defgroup DMA_fifo_status_level
* @{
*/
#define DMA_FIFOStatus_Less1QuarterFull ((uint32_t)0x00000000 << 3)
#define DMA_FIFOStatus_1QuarterFull ((uint32_t)0x00000001 << 3)
#define DMA_FIFOStatus_HalfFull ((uint32_t)0x00000002 << 3)
#define DMA_FIFOStatus_3QuartersFull ((uint32_t)0x00000003 << 3)
#define DMA_FIFOStatus_Empty ((uint32_t)0x00000004 << 3)
#define DMA_FIFOStatus_Full ((uint32_t)0x00000005 << 3)
#define IS_DMA_FIFO_STATUS(STATUS) (((STATUS) == DMA_FIFOStatus_Less1QuarterFull ) || \
((STATUS) == DMA_FIFOStatus_HalfFull) || \
((STATUS) == DMA_FIFOStatus_1QuarterFull) || \
((STATUS) == DMA_FIFOStatus_3QuartersFull) || \
((STATUS) == DMA_FIFOStatus_Full) || \
((STATUS) == DMA_FIFOStatus_Empty))
/**
* @}
*/
/** @defgroup DMA_flags_definition
* @{
*/
#define DMA_FLAG_FEIF0 ((uint32_t)0x10800001)
#define DMA_FLAG_DMEIF0 ((uint32_t)0x10800004)
#define DMA_FLAG_TEIF0 ((uint32_t)0x10000008)
#define DMA_FLAG_HTIF0 ((uint32_t)0x10000010)
#define DMA_FLAG_TCIF0 ((uint32_t)0x10000020)
#define DMA_FLAG_FEIF1 ((uint32_t)0x10000040)
#define DMA_FLAG_DMEIF1 ((uint32_t)0x10000100)
#define DMA_FLAG_TEIF1 ((uint32_t)0x10000200)
#define DMA_FLAG_HTIF1 ((uint32_t)0x10000400)
#define DMA_FLAG_TCIF1 ((uint32_t)0x10000800)
#define DMA_FLAG_FEIF2 ((uint32_t)0x10010000)
#define DMA_FLAG_DMEIF2 ((uint32_t)0x10040000)
#define DMA_FLAG_TEIF2 ((uint32_t)0x10080000)
#define DMA_FLAG_HTIF2 ((uint32_t)0x10100000)
#define DMA_FLAG_TCIF2 ((uint32_t)0x10200000)
#define DMA_FLAG_FEIF3 ((uint32_t)0x10400000)
#define DMA_FLAG_DMEIF3 ((uint32_t)0x11000000)
#define DMA_FLAG_TEIF3 ((uint32_t)0x12000000)
#define DMA_FLAG_HTIF3 ((uint32_t)0x14000000)
#define DMA_FLAG_TCIF3 ((uint32_t)0x18000000)
#define DMA_FLAG_FEIF4 ((uint32_t)0x20000001)
#define DMA_FLAG_DMEIF4 ((uint32_t)0x20000004)
#define DMA_FLAG_TEIF4 ((uint32_t)0x20000008)
#define DMA_FLAG_HTIF4 ((uint32_t)0x20000010)
#define DMA_FLAG_TCIF4 ((uint32_t)0x20000020)
#define DMA_FLAG_FEIF5 ((uint32_t)0x20000040)
#define DMA_FLAG_DMEIF5 ((uint32_t)0x20000100)
#define DMA_FLAG_TEIF5 ((uint32_t)0x20000200)
#define DMA_FLAG_HTIF5 ((uint32_t)0x20000400)
#define DMA_FLAG_TCIF5 ((uint32_t)0x20000800)
#define DMA_FLAG_FEIF6 ((uint32_t)0x20010000)
#define DMA_FLAG_DMEIF6 ((uint32_t)0x20040000)
#define DMA_FLAG_TEIF6 ((uint32_t)0x20080000)
#define DMA_FLAG_HTIF6 ((uint32_t)0x20100000)
#define DMA_FLAG_TCIF6 ((uint32_t)0x20200000)
#define DMA_FLAG_FEIF7 ((uint32_t)0x20400000)
#define DMA_FLAG_DMEIF7 ((uint32_t)0x21000000)
#define DMA_FLAG_TEIF7 ((uint32_t)0x22000000)
#define DMA_FLAG_HTIF7 ((uint32_t)0x24000000)
#define DMA_FLAG_TCIF7 ((uint32_t)0x28000000)
#define IS_DMA_CLEAR_FLAG(FLAG) ((((FLAG) & 0x30000000) != 0x30000000) && (((FLAG) & 0x30000000) != 0) && \
(((FLAG) & 0xC002F082) == 0x00) && ((FLAG) != 0x00))
#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA_FLAG_TCIF0) || ((FLAG) == DMA_FLAG_HTIF0) || \
((FLAG) == DMA_FLAG_TEIF0) || ((FLAG) == DMA_FLAG_DMEIF0) || \
((FLAG) == DMA_FLAG_FEIF0) || ((FLAG) == DMA_FLAG_TCIF1) || \
((FLAG) == DMA_FLAG_HTIF1) || ((FLAG) == DMA_FLAG_TEIF1) || \
((FLAG) == DMA_FLAG_DMEIF1) || ((FLAG) == DMA_FLAG_FEIF1) || \
((FLAG) == DMA_FLAG_TCIF2) || ((FLAG) == DMA_FLAG_HTIF2) || \
((FLAG) == DMA_FLAG_TEIF2) || ((FLAG) == DMA_FLAG_DMEIF2) || \
((FLAG) == DMA_FLAG_FEIF2) || ((FLAG) == DMA_FLAG_TCIF3) || \
((FLAG) == DMA_FLAG_HTIF3) || ((FLAG) == DMA_FLAG_TEIF3) || \
((FLAG) == DMA_FLAG_DMEIF3) || ((FLAG) == DMA_FLAG_FEIF3) || \
((FLAG) == DMA_FLAG_TCIF4) || ((FLAG) == DMA_FLAG_HTIF4) || \
((FLAG) == DMA_FLAG_TEIF4) || ((FLAG) == DMA_FLAG_DMEIF4) || \
((FLAG) == DMA_FLAG_FEIF4) || ((FLAG) == DMA_FLAG_TCIF5) || \
((FLAG) == DMA_FLAG_HTIF5) || ((FLAG) == DMA_FLAG_TEIF5) || \
((FLAG) == DMA_FLAG_DMEIF5) || ((FLAG) == DMA_FLAG_FEIF5) || \
((FLAG) == DMA_FLAG_TCIF6) || ((FLAG) == DMA_FLAG_HTIF6) || \
((FLAG) == DMA_FLAG_TEIF6) || ((FLAG) == DMA_FLAG_DMEIF6) || \
((FLAG) == DMA_FLAG_FEIF6) || ((FLAG) == DMA_FLAG_TCIF7) || \
((FLAG) == DMA_FLAG_HTIF7) || ((FLAG) == DMA_FLAG_TEIF7) || \
((FLAG) == DMA_FLAG_DMEIF7) || ((FLAG) == DMA_FLAG_FEIF7))
/**
* @}
*/
/** @defgroup DMA_interrupt_enable_definitions
* @{
*/
#define DMA_IT_TC ((uint32_t)0x00000010)
#define DMA_IT_HT ((uint32_t)0x00000008)
#define DMA_IT_TE ((uint32_t)0x00000004)
#define DMA_IT_DME ((uint32_t)0x00000002)
#define DMA_IT_FE ((uint32_t)0x00000080)
#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFF61) == 0x00) && ((IT) != 0x00))
/**
* @}
*/
/** @defgroup DMA_interrupts_definitions
* @{
*/
#define DMA_IT_FEIF0 ((uint32_t)0x90000001)
#define DMA_IT_DMEIF0 ((uint32_t)0x10001004)
#define DMA_IT_TEIF0 ((uint32_t)0x10002008)
#define DMA_IT_HTIF0 ((uint32_t)0x10004010)
#define DMA_IT_TCIF0 ((uint32_t)0x10008020)
#define DMA_IT_FEIF1 ((uint32_t)0x90000040)
#define DMA_IT_DMEIF1 ((uint32_t)0x10001100)
#define DMA_IT_TEIF1 ((uint32_t)0x10002200)
#define DMA_IT_HTIF1 ((uint32_t)0x10004400)
#define DMA_IT_TCIF1 ((uint32_t)0x10008800)
#define DMA_IT_FEIF2 ((uint32_t)0x90010000)
#define DMA_IT_DMEIF2 ((uint32_t)0x10041000)
#define DMA_IT_TEIF2 ((uint32_t)0x10082000)
#define DMA_IT_HTIF2 ((uint32_t)0x10104000)
#define DMA_IT_TCIF2 ((uint32_t)0x10208000)
#define DMA_IT_FEIF3 ((uint32_t)0x90400000)
#define DMA_IT_DMEIF3 ((uint32_t)0x11001000)
#define DMA_IT_TEIF3 ((uint32_t)0x12002000)
#define DMA_IT_HTIF3 ((uint32_t)0x14004000)
#define DMA_IT_TCIF3 ((uint32_t)0x18008000)
#define DMA_IT_FEIF4 ((uint32_t)0xA0000001)
#define DMA_IT_DMEIF4 ((uint32_t)0x20001004)
#define DMA_IT_TEIF4 ((uint32_t)0x20002008)
#define DMA_IT_HTIF4 ((uint32_t)0x20004010)
#define DMA_IT_TCIF4 ((uint32_t)0x20008020)
#define DMA_IT_FEIF5 ((uint32_t)0xA0000040)
#define DMA_IT_DMEIF5 ((uint32_t)0x20001100)
#define DMA_IT_TEIF5 ((uint32_t)0x20002200)
#define DMA_IT_HTIF5 ((uint32_t)0x20004400)
#define DMA_IT_TCIF5 ((uint32_t)0x20008800)
#define DMA_IT_FEIF6 ((uint32_t)0xA0010000)
#define DMA_IT_DMEIF6 ((uint32_t)0x20041000)
#define DMA_IT_TEIF6 ((uint32_t)0x20082000)
#define DMA_IT_HTIF6 ((uint32_t)0x20104000)
#define DMA_IT_TCIF6 ((uint32_t)0x20208000)
#define DMA_IT_FEIF7 ((uint32_t)0xA0400000)
#define DMA_IT_DMEIF7 ((uint32_t)0x21001000)
#define DMA_IT_TEIF7 ((uint32_t)0x22002000)
#define DMA_IT_HTIF7 ((uint32_t)0x24004000)
#define DMA_IT_TCIF7 ((uint32_t)0x28008000)
#define IS_DMA_CLEAR_IT(IT) ((((IT) & 0x30000000) != 0x30000000) && \
(((IT) & 0x30000000) != 0) && ((IT) != 0x00) && \
(((IT) & 0x40820082) == 0x00))
#define IS_DMA_GET_IT(IT) (((IT) == DMA_IT_TCIF0) || ((IT) == DMA_IT_HTIF0) || \
((IT) == DMA_IT_TEIF0) || ((IT) == DMA_IT_DMEIF0) || \
((IT) == DMA_IT_FEIF0) || ((IT) == DMA_IT_TCIF1) || \
((IT) == DMA_IT_HTIF1) || ((IT) == DMA_IT_TEIF1) || \
((IT) == DMA_IT_DMEIF1)|| ((IT) == DMA_IT_FEIF1) || \
((IT) == DMA_IT_TCIF2) || ((IT) == DMA_IT_HTIF2) || \
((IT) == DMA_IT_TEIF2) || ((IT) == DMA_IT_DMEIF2) || \
((IT) == DMA_IT_FEIF2) || ((IT) == DMA_IT_TCIF3) || \
((IT) == DMA_IT_HTIF3) || ((IT) == DMA_IT_TEIF3) || \
((IT) == DMA_IT_DMEIF3)|| ((IT) == DMA_IT_FEIF3) || \
((IT) == DMA_IT_TCIF4) || ((IT) == DMA_IT_HTIF4) || \
((IT) == DMA_IT_TEIF4) || ((IT) == DMA_IT_DMEIF4) || \
((IT) == DMA_IT_FEIF4) || ((IT) == DMA_IT_TCIF5) || \
((IT) == DMA_IT_HTIF5) || ((IT) == DMA_IT_TEIF5) || \
((IT) == DMA_IT_DMEIF5)|| ((IT) == DMA_IT_FEIF5) || \
((IT) == DMA_IT_TCIF6) || ((IT) == DMA_IT_HTIF6) || \
((IT) == DMA_IT_TEIF6) || ((IT) == DMA_IT_DMEIF6) || \
((IT) == DMA_IT_FEIF6) || ((IT) == DMA_IT_TCIF7) || \
((IT) == DMA_IT_HTIF7) || ((IT) == DMA_IT_TEIF7) || \
((IT) == DMA_IT_DMEIF7)|| ((IT) == DMA_IT_FEIF7))
/**
* @}
*/
/** @defgroup DMA_peripheral_increment_offset
* @{
*/
#define DMA_PINCOS_Psize ((uint32_t)0x00000000)
#define DMA_PINCOS_WordAligned ((uint32_t)0x00008000)
#define IS_DMA_PINCOS_SIZE(SIZE) (((SIZE) == DMA_PINCOS_Psize) || \
((SIZE) == DMA_PINCOS_WordAligned))
/**
* @}
*/
/** @defgroup DMA_flow_controller_definitions
* @{
*/
#define DMA_FlowCtrl_Memory ((uint32_t)0x00000000)
#define DMA_FlowCtrl_Peripheral ((uint32_t)0x00000020)
#define IS_DMA_FLOW_CTRL(CTRL) (((CTRL) == DMA_FlowCtrl_Memory) || \
((CTRL) == DMA_FlowCtrl_Peripheral))
/**
* @}
*/
/** @defgroup DMA_memory_targets_definitions
* @{
*/
#define DMA_Memory_0 ((uint32_t)0x00000000)
#define DMA_Memory_1 ((uint32_t)0x00080000)
#define IS_DMA_CURRENT_MEM(MEM) (((MEM) == DMA_Memory_0) || ((MEM) == DMA_Memory_1))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the DMA configuration to the default reset state *****/
void DMA_DeInit(DMA_Stream_TypeDef* DMAy_Streamx);
/* Initialization and Configuration functions *********************************/
void DMA_Init(DMA_Stream_TypeDef* DMAy_Streamx, DMA_InitTypeDef* DMA_InitStruct);
void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
void DMA_Cmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState);
/* Optional Configuration functions *******************************************/
void DMA_PeriphIncOffsetSizeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_Pincos);
void DMA_FlowControllerConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FlowCtrl);
/* Data Counter functions *****************************************************/
void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter);
uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx);
/* Double Buffer mode functions ***********************************************/
void DMA_DoubleBufferModeConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t Memory1BaseAddr,
uint32_t DMA_CurrentMemory);
void DMA_DoubleBufferModeCmd(DMA_Stream_TypeDef* DMAy_Streamx, FunctionalState NewState);
void DMA_MemoryTargetConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t MemoryBaseAddr,
uint32_t DMA_MemoryTarget);
uint32_t DMA_GetCurrentMemoryTarget(DMA_Stream_TypeDef* DMAy_Streamx);
/* Interrupts and flags management functions **********************************/
FunctionalState DMA_GetCmdStatus(DMA_Stream_TypeDef* DMAy_Streamx);
uint32_t DMA_GetFIFOStatus(DMA_Stream_TypeDef* DMAy_Streamx);
FlagStatus DMA_GetFlagStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG);
void DMA_ClearFlag(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_FLAG);
void DMA_ITConfig(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT, FunctionalState NewState);
ITStatus DMA_GetITStatus(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT);
void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_DMA_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

475
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dma2d.h Normal file
View file

@ -0,0 +1,475 @@
/**
******************************************************************************
* @file stm32f4xx_dma2d.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the DMA2D firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DMA2D_H
#define __STM32F4xx_DMA2D_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DMA2D
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DMA2D Init structure definition
*/
typedef struct
{
uint32_t DMA2D_Mode; /*!< configures the DMA2D transfer mode.
This parameter can be one value of @ref DMA2D_MODE */
uint32_t DMA2D_CMode; /*!< configures the color format of the output image.
This parameter can be one value of @ref DMA2D_CMODE */
uint32_t DMA2D_OutputBlue; /*!< configures the blue value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0xFF if RGB888 color mode is slected
- from 0x00 to 0x1F if RGB565 color mode is slected
- from 0x00 to 0x1F if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputGreen; /*!< configures the green value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is selected
- from 0x00 to 0xFF if RGB888 color mode is selected
- from 0x00 to 0x2F if RGB565 color mode is selected
- from 0x00 to 0x1F if ARGB1555 color mode is selected
- from 0x00 to 0x0F if ARGB4444 color mode is selected */
uint32_t DMA2D_OutputRed; /*!< configures the red value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0xFF if RGB888 color mode is slected
- from 0x00 to 0x1F if RGB565 color mode is slected
- from 0x00 to 0x1F if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputAlpha; /*!< configures the alpha channel of the output color.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is selected
- from 0x00 to 0x01 if ARGB1555 color mode is selected
- from 0x00 to 0x0F if ARGB4444 color mode is selected */
uint32_t DMA2D_OutputMemoryAdd; /*!< Specifies the memory address. This parameter
must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_OutputOffset; /*!< Specifies the Offset value. This parameter must be range from
0x0000 to 0x3FFF. */
uint32_t DMA2D_NumberOfLine; /*!< Configures the number of line of the area to be transfered.
This parameter must range from 0x0000 to 0xFFFF */
uint32_t DMA2D_PixelPerLine; /*!< Configures the number pixel per line of the area to be transferred.
This parameter must range from 0x0000 to 0x3FFF */
} DMA2D_InitTypeDef;
typedef struct
{
uint32_t DMA2D_FGMA; /*!< configures the DMA2D foreground memory address.
This parameter must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_FGO; /*!< configures the DMA2D foreground offset.
This parameter must be range from 0x0000 to 0x3FFF. */
uint32_t DMA2D_FGCM; /*!< configures the DMA2D foreground color mode .
This parameter can be one value of @ref DMA2D_FGCM */
uint32_t DMA2D_FG_CLUT_CM; /*!< configures the DMA2D foreground CLUT color mode.
This parameter can be one value of @ref DMA2D_FG_CLUT_CM */
uint32_t DMA2D_FG_CLUT_SIZE; /*!< configures the DMA2D foreground CLUT size.
This parameter must range from 0x00 to 0xFF. */
uint32_t DMA2D_FGPFC_ALPHA_MODE; /*!< configures the DMA2D foreground alpha mode.
This parameter can be one value of @ref DMA2D_FGPFC_ALPHA_MODE */
uint32_t DMA2D_FGPFC_ALPHA_VALUE; /*!< Specifies the DMA2D foreground alpha value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_BLUE; /*!< Specifies the DMA2D foreground blue value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_GREEN; /*!< Specifies the DMA2D foreground green value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_RED; /*!< Specifies the DMA2D foreground red value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGCMAR; /*!< Configures the DMA2D foreground CLUT memory address.
This parameter must range from 0x00000000 to 0xFFFFFFFF. */
} DMA2D_FG_InitTypeDef;
typedef struct
{
uint32_t DMA2D_BGMA; /*!< configures the DMA2D background memory address.
This parameter must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_BGO; /*!< configures the DMA2D background offset.
This parameter must be range from 0x0000 to 0x3FFF. */
uint32_t DMA2D_BGCM; /*!< configures the DMA2D background color mode .
This parameter can be one value of @ref DMA2D_FGCM */
uint32_t DMA2D_BG_CLUT_CM; /*!< configures the DMA2D background CLUT color mode.
This parameter can be one value of @ref DMA2D_FG_CLUT_CM */
uint32_t DMA2D_BG_CLUT_SIZE; /*!< configures the DMA2D background CLUT size.
This parameter must range from 0x00 to 0xFF. */
uint32_t DMA2D_BGPFC_ALPHA_MODE; /*!< configures the DMA2D background alpha mode.
This parameter can be one value of @ref DMA2D_FGPFC_ALPHA_MODE */
uint32_t DMA2D_BGPFC_ALPHA_VALUE; /*!< Specifies the DMA2D background alpha value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_BLUE; /*!< Specifies the DMA2D background blue value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_GREEN; /*!< Specifies the DMA2D background green value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_RED; /*!< Specifies the DMA2D background red value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGCMAR; /*!< Configures the DMA2D background CLUT memory address.
This parameter must range from 0x00000000 to 0xFFFFFFFF. */
} DMA2D_BG_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA2D_Exported_Constants
* @{
*/
/** @defgroup DMA2D_MODE
* @{
*/
#define DMA2D_M2M ((uint32_t)0x00000000)
#define DMA2D_M2M_PFC ((uint32_t)0x00010000)
#define DMA2D_M2M_BLEND ((uint32_t)0x00020000)
#define DMA2D_R2M ((uint32_t)0x00030000)
#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
/**
* @}
*/
/** @defgroup DMA2D_CMODE
* @{
*/
#define DMA2D_ARGB8888 ((uint32_t)0x00000000)
#define DMA2D_RGB888 ((uint32_t)0x00000001)
#define DMA2D_RGB565 ((uint32_t)0x00000002)
#define DMA2D_ARGB1555 ((uint32_t)0x00000003)
#define DMA2D_ARGB4444 ((uint32_t)0x00000004)
#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
((MODE_ARGB) == DMA2D_ARGB4444))
/**
* @}
*/
/** @defgroup DMA2D_OUTPUT_COLOR
* @{
*/
#define DMA2D_Output_Color ((uint32_t)0x000000FF)
#define IS_DMA2D_OGREEN(OGREEN) ((OGREEN) <= DMA2D_Output_Color)
#define IS_DMA2D_ORED(ORED) ((ORED) <= DMA2D_Output_Color)
#define IS_DMA2D_OBLUE(OBLUE) ((OBLUE) <= DMA2D_Output_Color)
#define IS_DMA2D_OALPHA(OALPHA) ((OALPHA) <= DMA2D_Output_Color)
/**
* @}
*/
/** @defgroup DMA2D_OUTPUT_OFFSET
* @{
*/
#define DMA2D_OUTPUT_OFFSET ((uint32_t)0x00003FFF)
#define IS_DMA2D_OUTPUT_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OUTPUT_OFFSET)
/**
* @}
*/
/** @defgroup DMA2D_SIZE
* @{
*/
#define DMA2D_pixel ((uint32_t)0x00003FFF)
#define DMA2D_Line ((uint32_t)0x0000FFFF)
#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_Line)
#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_pixel)
/**
* @}
*/
/** @defgroup DMA2D_OFFSET
* @{
*/
#define OFFSET ((uint32_t)0x00003FFF)
#define IS_DMA2D_FGO(FGO) ((FGO) <= OFFSET)
#define IS_DMA2D_BGO(BGO) ((BGO) <= OFFSET)
/**
* @}
*/
/** @defgroup DMA2D_FGCM
* @{
*/
#define CM_ARGB8888 ((uint32_t)0x00000000)
#define CM_RGB888 ((uint32_t)0x00000001)
#define CM_RGB565 ((uint32_t)0x00000002)
#define CM_ARGB1555 ((uint32_t)0x00000003)
#define CM_ARGB4444 ((uint32_t)0x00000004)
#define CM_L8 ((uint32_t)0x00000005)
#define CM_AL44 ((uint32_t)0x00000006)
#define CM_AL88 ((uint32_t)0x00000007)
#define CM_L4 ((uint32_t)0x00000008)
#define CM_A8 ((uint32_t)0x00000009)
#define CM_A4 ((uint32_t)0x0000000A)
#define IS_DMA2D_FGCM(FGCM) (((FGCM) == CM_ARGB8888) || ((FGCM) == CM_RGB888) || \
((FGCM) == CM_RGB565) || ((FGCM) == CM_ARGB1555) || \
((FGCM) == CM_ARGB4444) || ((FGCM) == CM_L8) || \
((FGCM) == CM_AL44) || ((FGCM) == CM_AL88) || \
((FGCM) == CM_L4) || ((FGCM) == CM_A8) || \
((FGCM) == CM_A4))
#define IS_DMA2D_BGCM(BGCM) (((BGCM) == CM_ARGB8888) || ((BGCM) == CM_RGB888) || \
((BGCM) == CM_RGB565) || ((BGCM) == CM_ARGB1555) || \
((BGCM) == CM_ARGB4444) || ((BGCM) == CM_L8) || \
((BGCM) == CM_AL44) || ((BGCM) == CM_AL88) || \
((BGCM) == CM_L4) || ((BGCM) == CM_A8) || \
((BGCM) == CM_A4))
/**
* @}
*/
/** @defgroup DMA2D_FG_CLUT_CM
* @{
*/
#define CLUT_CM_ARGB8888 ((uint32_t)0x00000000)
#define CLUT_CM_RGB888 ((uint32_t)0x00000001)
#define IS_DMA2D_FG_CLUT_CM(FG_CLUT_CM) (((FG_CLUT_CM) == CLUT_CM_ARGB8888) || ((FG_CLUT_CM) == CLUT_CM_RGB888))
#define IS_DMA2D_BG_CLUT_CM(BG_CLUT_CM) (((BG_CLUT_CM) == CLUT_CM_ARGB8888) || ((BG_CLUT_CM) == CLUT_CM_RGB888))
/**
* @}
*/
/** @defgroup DMA2D_FG_COLOR_VALUE
* @{
*/
#define COLOR_VALUE ((uint32_t)0x000000FF)
#define IS_DMA2D_FG_CLUT_SIZE(FG_CLUT_SIZE) ((FG_CLUT_SIZE) <= COLOR_VALUE)
#define IS_DMA2D_FG_ALPHA_VALUE(FG_ALPHA_VALUE) ((FG_ALPHA_VALUE) <= COLOR_VALUE)
#define IS_DMA2D_FGC_BLUE(FGC_BLUE) ((FGC_BLUE) <= COLOR_VALUE)
#define IS_DMA2D_FGC_GREEN(FGC_GREEN) ((FGC_GREEN) <= COLOR_VALUE)
#define IS_DMA2D_FGC_RED(FGC_RED) ((FGC_RED) <= COLOR_VALUE)
#define IS_DMA2D_BG_CLUT_SIZE(BG_CLUT_SIZE) ((BG_CLUT_SIZE) <= COLOR_VALUE)
#define IS_DMA2D_BG_ALPHA_VALUE(BG_ALPHA_VALUE) ((BG_ALPHA_VALUE) <= COLOR_VALUE)
#define IS_DMA2D_BGC_BLUE(BGC_BLUE) ((BGC_BLUE) <= COLOR_VALUE)
#define IS_DMA2D_BGC_GREEN(BGC_GREEN) ((BGC_GREEN) <= COLOR_VALUE)
#define IS_DMA2D_BGC_RED(BGC_RED) ((BGC_RED) <= COLOR_VALUE)
/**
* @}
*/
/** DMA2D_FGPFC_ALPHA_MODE
* @{
*/
#define NO_MODIF_ALPHA_VALUE ((uint32_t)0x00000000)
#define REPLACE_ALPHA_VALUE ((uint32_t)0x00000001)
#define COMBINE_ALPHA_VALUE ((uint32_t)0x00000002)
#define IS_DMA2D_FG_ALPHA_MODE(FG_ALPHA_MODE) (((FG_ALPHA_MODE) == NO_MODIF_ALPHA_VALUE) || \
((FG_ALPHA_MODE) == REPLACE_ALPHA_VALUE) || \
((FG_ALPHA_MODE) == COMBINE_ALPHA_VALUE))
#define IS_DMA2D_BG_ALPHA_MODE(BG_ALPHA_MODE) (((BG_ALPHA_MODE) == NO_MODIF_ALPHA_VALUE) || \
((BG_ALPHA_MODE) == REPLACE_ALPHA_VALUE) || \
((BG_ALPHA_MODE) == COMBINE_ALPHA_VALUE))
/**
* @}
*/
/** @defgroup DMA2D_Interrupts
* @{
*/
#define DMA2D_IT_CE DMA2D_CR_CEIE
#define DMA2D_IT_CTC DMA2D_CR_CTCIE
#define DMA2D_IT_CAE DMA2D_CR_CAEIE
#define DMA2D_IT_TW DMA2D_CR_TWIE
#define DMA2D_IT_TC DMA2D_CR_TCIE
#define DMA2D_IT_TE DMA2D_CR_TEIE
#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
/**
* @}
*/
/** @defgroup DMA2D_Flag
* @{
*/
#define DMA2D_FLAG_CE DMA2D_ISR_CEIF
#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF
#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF
#define DMA2D_FLAG_TW DMA2D_ISR_TWIF
#define DMA2D_FLAG_TC DMA2D_ISR_TCIF
#define DMA2D_FLAG_TE DMA2D_ISR_TEIF
#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
/**
* @}
*/
/** @defgroup DMA2D_DeadTime
* @{
*/
#define DEADTIME ((uint32_t)0x000000FF)
#define IS_DMA2D_DEAD_TIME(DEAD_TIME) ((DEAD_TIME) <= DEADTIME)
#define LINE_WATERMARK DMA2D_LWR_LW
#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the DMA2D configuration to the default reset state *****/
void DMA2D_DeInit(void);
/* Initialization and Configuration functions *********************************/
void DMA2D_Init(DMA2D_InitTypeDef* DMA2D_InitStruct);
void DMA2D_StructInit(DMA2D_InitTypeDef* DMA2D_InitStruct);
void DMA2D_StartTransfer(void);
void DMA2D_AbortTransfer(void);
void DMA2D_Suspend(FunctionalState NewState);
void DMA2D_FGConfig(DMA2D_FG_InitTypeDef* DMA2D_FG_InitStruct);
void DMA2D_FG_StructInit(DMA2D_FG_InitTypeDef* DMA2D_FG_InitStruct);
void DMA2D_BGConfig(DMA2D_BG_InitTypeDef* DMA2D_BG_InitStruct);
void DMA2D_BG_StructInit(DMA2D_BG_InitTypeDef* DMA2D_BG_InitStruct);
void DMA2D_FGStart(FunctionalState NewState);
void DMA2D_BGStart(FunctionalState NewState);
void DMA2D_DeadTimeConfig(uint32_t DMA2D_DeadTime, FunctionalState NewState);
void DMA2D_LineWatermarkConfig(uint32_t DMA2D_LWatermarkConfig);
/* Interrupts and flags management functions **********************************/
void DMA2D_ITConfig(uint32_t DMA2D_IT, FunctionalState NewState);
FlagStatus DMA2D_GetFlagStatus(uint32_t DMA2D_FLAG);
void DMA2D_ClearFlag(uint32_t DMA2D_FLAG);
ITStatus DMA2D_GetITStatus(uint32_t DMA2D_IT);
void DMA2D_ClearITPendingBit(uint32_t DMA2D_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_DMA2D_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

183
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_exti.h Normal file
View file

@ -0,0 +1,183 @@
/**
******************************************************************************
* @file stm32f4xx_exti.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_EXTI_H
#define __STM32F4xx_EXTI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup EXTI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief EXTI mode enumeration
*/
typedef enum
{
EXTI_Mode_Interrupt = 0x00,
EXTI_Mode_Event = 0x04
}EXTIMode_TypeDef;
#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
/**
* @brief EXTI Trigger enumeration
*/
typedef enum
{
EXTI_Trigger_Rising = 0x08,
EXTI_Trigger_Falling = 0x0C,
EXTI_Trigger_Rising_Falling = 0x10
}EXTITrigger_TypeDef;
#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
((TRIGGER) == EXTI_Trigger_Falling) || \
((TRIGGER) == EXTI_Trigger_Rising_Falling))
/**
* @brief EXTI Init Structure definition
*/
typedef struct
{
uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
This parameter can be any combination value of @ref EXTI_Lines */
EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
This parameter can be a value of @ref EXTIMode_TypeDef */
EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
This parameter can be a value of @ref EXTITrigger_TypeDef */
FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
}EXTI_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup EXTI_Exported_Constants
* @{
*/
/** @defgroup EXTI_Lines
* @{
*/
#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF800000) == 0x00) && ((LINE) != (uint16_t)0x00))
#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \
((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) ||\
((LINE) == EXTI_Line22))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the EXTI configuration to the default reset state *****/
void EXTI_DeInit(void);
/* Initialization and Configuration functions *********************************/
void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
/* Interrupts and flags management functions **********************************/
FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
void EXTI_ClearFlag(uint32_t EXTI_Line);
ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_EXTI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

488
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_flash.h Normal file
View file

@ -0,0 +1,488 @@
/**
******************************************************************************
* @file stm32f4xx_flash.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the FLASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_FLASH_H
#define __STM32F4xx_FLASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FLASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief FLASH Status
*/
typedef enum
{
FLASH_BUSY = 1,
FLASH_ERROR_RD,
FLASH_ERROR_PGS,
FLASH_ERROR_PGP,
FLASH_ERROR_PGA,
FLASH_ERROR_WRP,
FLASH_ERROR_PROGRAM,
FLASH_ERROR_OPERATION,
FLASH_COMPLETE
}FLASH_Status;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FLASH_Exported_Constants
* @{
*/
/** @defgroup Flash_Latency
* @{
*/
#define FLASH_Latency_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */
#define FLASH_Latency_1 ((uint8_t)0x0001) /*!< FLASH One Latency cycle */
#define FLASH_Latency_2 ((uint8_t)0x0002) /*!< FLASH Two Latency cycles */
#define FLASH_Latency_3 ((uint8_t)0x0003) /*!< FLASH Three Latency cycles */
#define FLASH_Latency_4 ((uint8_t)0x0004) /*!< FLASH Four Latency cycles */
#define FLASH_Latency_5 ((uint8_t)0x0005) /*!< FLASH Five Latency cycles */
#define FLASH_Latency_6 ((uint8_t)0x0006) /*!< FLASH Six Latency cycles */
#define FLASH_Latency_7 ((uint8_t)0x0007) /*!< FLASH Seven Latency cycles */
#define FLASH_Latency_8 ((uint8_t)0x0008) /*!< FLASH Eight Latency cycles */
#define FLASH_Latency_9 ((uint8_t)0x0009) /*!< FLASH Nine Latency cycles */
#define FLASH_Latency_10 ((uint8_t)0x000A) /*!< FLASH Ten Latency cycles */
#define FLASH_Latency_11 ((uint8_t)0x000B) /*!< FLASH Eleven Latency cycles */
#define FLASH_Latency_12 ((uint8_t)0x000C) /*!< FLASH Twelve Latency cycles */
#define FLASH_Latency_13 ((uint8_t)0x000D) /*!< FLASH Thirteen Latency cycles */
#define FLASH_Latency_14 ((uint8_t)0x000E) /*!< FLASH Fourteen Latency cycles */
#define FLASH_Latency_15 ((uint8_t)0x000F) /*!< FLASH Fifteen Latency cycles */
#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
((LATENCY) == FLASH_Latency_1) || \
((LATENCY) == FLASH_Latency_2) || \
((LATENCY) == FLASH_Latency_3) || \
((LATENCY) == FLASH_Latency_4) || \
((LATENCY) == FLASH_Latency_5) || \
((LATENCY) == FLASH_Latency_6) || \
((LATENCY) == FLASH_Latency_7) || \
((LATENCY) == FLASH_Latency_8) || \
((LATENCY) == FLASH_Latency_9) || \
((LATENCY) == FLASH_Latency_10) || \
((LATENCY) == FLASH_Latency_11) || \
((LATENCY) == FLASH_Latency_12) || \
((LATENCY) == FLASH_Latency_13) || \
((LATENCY) == FLASH_Latency_14) || \
((LATENCY) == FLASH_Latency_15))
/**
* @}
*/
/** @defgroup FLASH_Voltage_Range
* @{
*/
#define VoltageRange_1 ((uint8_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
#define VoltageRange_2 ((uint8_t)0x01) /*!<Device operating range: 2.1V to 2.7V */
#define VoltageRange_3 ((uint8_t)0x02) /*!<Device operating range: 2.7V to 3.6V */
#define VoltageRange_4 ((uint8_t)0x03) /*!<Device operating range: 2.7V to 3.6V + External Vpp */
#define IS_VOLTAGERANGE(RANGE)(((RANGE) == VoltageRange_1) || \
((RANGE) == VoltageRange_2) || \
((RANGE) == VoltageRange_3) || \
((RANGE) == VoltageRange_4))
/**
* @}
*/
/** @defgroup FLASH_Sectors
* @{
*/
#define FLASH_Sector_0 ((uint16_t)0x0000) /*!< Sector Number 0 */
#define FLASH_Sector_1 ((uint16_t)0x0008) /*!< Sector Number 1 */
#define FLASH_Sector_2 ((uint16_t)0x0010) /*!< Sector Number 2 */
#define FLASH_Sector_3 ((uint16_t)0x0018) /*!< Sector Number 3 */
#define FLASH_Sector_4 ((uint16_t)0x0020) /*!< Sector Number 4 */
#define FLASH_Sector_5 ((uint16_t)0x0028) /*!< Sector Number 5 */
#define FLASH_Sector_6 ((uint16_t)0x0030) /*!< Sector Number 6 */
#define FLASH_Sector_7 ((uint16_t)0x0038) /*!< Sector Number 7 */
#define FLASH_Sector_8 ((uint16_t)0x0040) /*!< Sector Number 8 */
#define FLASH_Sector_9 ((uint16_t)0x0048) /*!< Sector Number 9 */
#define FLASH_Sector_10 ((uint16_t)0x0050) /*!< Sector Number 10 */
#define FLASH_Sector_11 ((uint16_t)0x0058) /*!< Sector Number 11 */
#define FLASH_Sector_12 ((uint16_t)0x0080) /*!< Sector Number 12 */
#define FLASH_Sector_13 ((uint16_t)0x0088) /*!< Sector Number 13 */
#define FLASH_Sector_14 ((uint16_t)0x0090) /*!< Sector Number 14 */
#define FLASH_Sector_15 ((uint16_t)0x0098) /*!< Sector Number 15 */
#define FLASH_Sector_16 ((uint16_t)0x00A0) /*!< Sector Number 16 */
#define FLASH_Sector_17 ((uint16_t)0x00A8) /*!< Sector Number 17 */
#define FLASH_Sector_18 ((uint16_t)0x00B0) /*!< Sector Number 18 */
#define FLASH_Sector_19 ((uint16_t)0x00B8) /*!< Sector Number 19 */
#define FLASH_Sector_20 ((uint16_t)0x00C0) /*!< Sector Number 20 */
#define FLASH_Sector_21 ((uint16_t)0x00C8) /*!< Sector Number 21 */
#define FLASH_Sector_22 ((uint16_t)0x00D0) /*!< Sector Number 22 */
#define FLASH_Sector_23 ((uint16_t)0x00D8) /*!< Sector Number 23 */
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_Sector_0) || ((SECTOR) == FLASH_Sector_1) ||\
((SECTOR) == FLASH_Sector_2) || ((SECTOR) == FLASH_Sector_3) ||\
((SECTOR) == FLASH_Sector_4) || ((SECTOR) == FLASH_Sector_5) ||\
((SECTOR) == FLASH_Sector_6) || ((SECTOR) == FLASH_Sector_7) ||\
((SECTOR) == FLASH_Sector_8) || ((SECTOR) == FLASH_Sector_9) ||\
((SECTOR) == FLASH_Sector_10) || ((SECTOR) == FLASH_Sector_11) ||\
((SECTOR) == FLASH_Sector_12) || ((SECTOR) == FLASH_Sector_13) ||\
((SECTOR) == FLASH_Sector_14) || ((SECTOR) == FLASH_Sector_15) ||\
((SECTOR) == FLASH_Sector_16) || ((SECTOR) == FLASH_Sector_17) ||\
((SECTOR) == FLASH_Sector_18) || ((SECTOR) == FLASH_Sector_19) ||\
((SECTOR) == FLASH_Sector_20) || ((SECTOR) == FLASH_Sector_21) ||\
((SECTOR) == FLASH_Sector_22) || ((SECTOR) == FLASH_Sector_23))
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x081FFFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) <= 0x1FFF7A0F)))
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined (STM32F40_41xxx)
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x080FFFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) <= 0x1FFF7A0F)))
#endif /* STM32F40_41xxx */
#if defined (STM32F401xx)
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) <= 0x1FFF7A0F)))
#endif /* STM32F401xx */
#if defined (STM32F411xE) || defined (STM32F446xx)
#define IS_FLASH_ADDRESS(ADDRESS) ((((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0807FFFF)) ||\
(((ADDRESS) >= 0x1FFF7800) && ((ADDRESS) <= 0x1FFF7A0F)))
#endif /* STM32F411xE */
/**
* @}
*/
/** @defgroup Option_Bytes_Write_Protection
* @{
*/
#define OB_WRP_Sector_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
#define OB_WRP_Sector_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
#define OB_WRP_Sector_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
#define OB_WRP_Sector_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
#define OB_WRP_Sector_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
#define OB_WRP_Sector_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
#define OB_WRP_Sector_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
#define OB_WRP_Sector_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
#define OB_WRP_Sector_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
#define OB_WRP_Sector_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
#define OB_WRP_Sector_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
#define OB_WRP_Sector_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
#define OB_WRP_Sector_12 ((uint32_t)0x00000001) /*!< Write protection of Sector12 */
#define OB_WRP_Sector_13 ((uint32_t)0x00000002) /*!< Write protection of Sector13 */
#define OB_WRP_Sector_14 ((uint32_t)0x00000004) /*!< Write protection of Sector14 */
#define OB_WRP_Sector_15 ((uint32_t)0x00000008) /*!< Write protection of Sector15 */
#define OB_WRP_Sector_16 ((uint32_t)0x00000010) /*!< Write protection of Sector16 */
#define OB_WRP_Sector_17 ((uint32_t)0x00000020) /*!< Write protection of Sector17 */
#define OB_WRP_Sector_18 ((uint32_t)0x00000040) /*!< Write protection of Sector18 */
#define OB_WRP_Sector_19 ((uint32_t)0x00000080) /*!< Write protection of Sector19 */
#define OB_WRP_Sector_20 ((uint32_t)0x00000100) /*!< Write protection of Sector20 */
#define OB_WRP_Sector_21 ((uint32_t)0x00000200) /*!< Write protection of Sector21 */
#define OB_WRP_Sector_22 ((uint32_t)0x00000400) /*!< Write protection of Sector22 */
#define OB_WRP_Sector_23 ((uint32_t)0x00000800) /*!< Write protection of Sector23 */
#define OB_WRP_Sector_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
#define IS_OB_WRP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
/**
* @}
*/
/** @defgroup Selection_Protection_Mode
* @{
*/
#define OB_PcROP_Disable ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
#define OB_PcROP_Enable ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PcROP_Disable) || ((PCROP) == OB_PcROP_Enable))
/**
* @}
*/
/** @defgroup Option_Bytes_PC_ReadWrite_Protection
* @{
*/
#define OB_PCROP_Sector_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
#define OB_PCROP_Sector_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
#define OB_PCROP_Sector_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
#define OB_PCROP_Sector_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
#define OB_PCROP_Sector_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
#define OB_PCROP_Sector_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
#define OB_PCROP_Sector_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
#define OB_PCROP_Sector_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
#define OB_PCROP_Sector_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */
#define OB_PCROP_Sector_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */
#define OB_PCROP_Sector_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */
#define OB_PCROP_Sector_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */
#define OB_PCROP_Sector_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */
#define OB_PCROP_Sector_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */
#define OB_PCROP_Sector_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */
#define OB_PCROP_Sector_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */
#define OB_PCROP_Sector_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */
#define OB_PCROP_Sector_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */
#define OB_PCROP_Sector_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */
#define OB_PCROP_Sector_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */
#define OB_PCROP_Sector_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */
#define OB_PCROP_Sector_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */
#define OB_PCROP_Sector_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */
#define OB_PCROP_Sector_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */
#define OB_PCROP_Sector_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_Read_Protection
* @{
*/
#define OB_RDP_Level_0 ((uint8_t)0xAA)
#define OB_RDP_Level_1 ((uint8_t)0x55)
/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
it's no more possible to go back to level 1 or 0 */
#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\
((LEVEL) == OB_RDP_Level_1))/*||\
((LEVEL) == OB_RDP_Level_2))*/
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_IWatchdog
* @{
*/
#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STOP
* @{
*/
#define OB_STOP_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
/**
* @}
*/
/** @defgroup FLASH_Option_Bytes_nRST_STDBY
* @{
*/
#define OB_STDBY_NoRST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
/**
* @}
*/
/** @defgroup FLASH_BOR_Reset_Level
* @{
*/
#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
#define IS_OB_BOR(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
/**
* @}
*/
/** @defgroup FLASH_Dual_Boot
* @{
*/
#define OB_Dual_BootEnabled ((uint8_t)0x10) /*!< Dual Bank Boot Enable */
#define OB_Dual_BootDisabled ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
#define IS_OB_BOOT(BOOT) (((BOOT) == OB_Dual_BootEnabled) || ((BOOT) == OB_Dual_BootDisabled))
/**
* @}
*/
/** @defgroup FLASH_Interrupts
* @{
*/
#define FLASH_IT_EOP ((uint32_t)0x01000000) /*!< End of FLASH Operation Interrupt source */
#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFCFFFFFF) == 0x00000000) && ((IT) != 0x00000000))
/**
* @}
*/
/** @defgroup FLASH_Flags
* @{
*/
#define FLASH_FLAG_EOP ((uint32_t)0x00000001) /*!< FLASH End of Operation flag */
#define FLASH_FLAG_OPERR ((uint32_t)0x00000002) /*!< FLASH operation Error flag */
#define FLASH_FLAG_WRPERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
#define FLASH_FLAG_PGAERR ((uint32_t)0x00000020) /*!< FLASH Programming Alignment error flag */
#define FLASH_FLAG_PGPERR ((uint32_t)0x00000040) /*!< FLASH Programming Parallelism error flag */
#define FLASH_FLAG_PGSERR ((uint32_t)0x00000080) /*!< FLASH Programming Sequence error flag */
#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
#define FLASH_FLAG_BSY ((uint32_t)0x00010000) /*!< FLASH Busy flag */
#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFE0C) == 0x00000000) && ((FLAG) != 0x00000000))
#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_EOP) || ((FLAG) == FLASH_FLAG_OPERR) || \
((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR) || \
((FLAG) == FLASH_FLAG_PGPERR) || ((FLAG) == FLASH_FLAG_PGSERR) || \
((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_RDERR))
/**
* @}
*/
/** @defgroup FLASH_Program_Parallelism
* @{
*/
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
/**
* @}
*/
/** @defgroup FLASH_Keys
* @{
*/
#define RDP_KEY ((uint16_t)0x00A5)
#define FLASH_KEY1 ((uint32_t)0x45670123)
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
/**
* @}
*/
/**
* @brief ACR register byte 0 (Bits[7:0]) base address
*/
#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
/**
* @brief OPTCR register byte 0 (Bits[7:0]) base address
*/
#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
/**
* @brief OPTCR register byte 1 (Bits[15:8]) base address
*/
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
/**
* @brief OPTCR register byte 2 (Bits[23:16]) base address
*/
#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
/**
* @brief OPTCR register byte 3 (Bits[31:24]) base address
*/
#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
/**
* @brief OPTCR1 register byte 0 (Bits[7:0]) base address
*/
#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A)
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* FLASH Interface configuration functions ************************************/
void FLASH_SetLatency(uint32_t FLASH_Latency);
void FLASH_PrefetchBufferCmd(FunctionalState NewState);
void FLASH_InstructionCacheCmd(FunctionalState NewState);
void FLASH_DataCacheCmd(FunctionalState NewState);
void FLASH_InstructionCacheReset(void);
void FLASH_DataCacheReset(void);
/* FLASH Memory Programming functions *****************************************/
void FLASH_Unlock(void);
void FLASH_Lock(void);
FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange);
FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange);
FLASH_Status FLASH_EraseAllBank1Sectors(uint8_t VoltageRange);
FLASH_Status FLASH_EraseAllBank2Sectors(uint8_t VoltageRange);
FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data);
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data);
/* Option Bytes Programming functions *****************************************/
void FLASH_OB_Unlock(void);
void FLASH_OB_Lock(void);
void FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState);
void FLASH_OB_WRP1Config(uint32_t OB_WRP, FunctionalState NewState);
void FLASH_OB_PCROPSelectionConfig(uint8_t OB_PcROP);
void FLASH_OB_PCROPConfig(uint32_t OB_PCROP, FunctionalState NewState);
void FLASH_OB_PCROP1Config(uint32_t OB_PCROP, FunctionalState NewState);
void FLASH_OB_RDPConfig(uint8_t OB_RDP);
void FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY);
void FLASH_OB_BORConfig(uint8_t OB_BOR);
void FLASH_OB_BootConfig(uint8_t OB_BOOT);
FLASH_Status FLASH_OB_Launch(void);
uint8_t FLASH_OB_GetUser(void);
uint16_t FLASH_OB_GetWRP(void);
uint16_t FLASH_OB_GetWRP1(void);
uint16_t FLASH_OB_GetPCROP(void);
uint16_t FLASH_OB_GetPCROP1(void);
FlagStatus FLASH_OB_GetRDP(void);
uint8_t FLASH_OB_GetBOR(void);
/* Interrupts and flags management functions **********************************/
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
void FLASH_ClearFlag(uint32_t FLASH_FLAG);
FLASH_Status FLASH_GetStatus(void);
FLASH_Status FLASH_WaitForLastOperation(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_FLASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

103
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_flash_ramfunc.h Normal file
View file

@ -0,0 +1,103 @@
/**
******************************************************************************
* @file stm32f4xx_flash_ramfunc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief Header file of FLASH RAMFUNC driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_FLASH_RAMFUNC_H
#define __STM32F4xx_FLASH_RAMFUNC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FLASH RAMFUNC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/**
* @brief __RAM_FUNC definition
*/
#if defined ( __CC_ARM )
/* ARM Compiler
------------
RAM functions are defined using the toolchain options.
Functions that are executed in RAM should reside in a separate source module.
Using the 'Options for File' dialog you can simply change the 'Code / Const'
area of a module to a memory space in physical RAM.
Available memory areas are declared in the 'Target' tab of the 'Options for Target'
dialog.
*/
#define __RAM_FUNC void
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc void
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
RAM functions are defined using a specific toolchain attribute
"__attribute__((section(".RamFunc")))".
*/
#define __RAM_FUNC void __attribute__((section(".RamFunc")))
#endif
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
__RAM_FUNC FLASH_FlashInterfaceCmd(FunctionalState NewState);
__RAM_FUNC FLASH_FlashSleepModeCmd(FunctionalState NewState);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1143
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_fmc.h Normal file
View file

File diff suppressed because it is too large Load diff

476
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_fmpi2c.h Normal file
View file

@ -0,0 +1,476 @@
/**
******************************************************************************
* @file stm32f30x_fmpi2c.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the I2C Fast Mode
* Plus firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_FMPI2C_H
#define __STM32F4xx_FMPI2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FMPI2C
* @{
*/
#if defined(STM32F446xx)
/* Exported types ------------------------------------------------------------*/
/**
* @brief FMPI2C Init structure definition
*/
typedef struct
{
uint32_t FMPI2C_Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
This parameter calculated by referring to FMPI2C initialization
section in Reference manual*/
uint32_t FMPI2C_AnalogFilter; /*!< Enables or disables analog noise filter.
This parameter can be a value of @ref FMPI2C_Analog_Filter */
uint32_t FMPI2C_DigitalFilter; /*!< Configures the digital noise filter.
This parameter can be a number between 0x00 and 0x0F */
uint32_t FMPI2C_Mode; /*!< Specifies the FMPI2C mode.
This parameter can be a value of @ref FMPI2C_mode */
uint32_t FMPI2C_OwnAddress1; /*!< Specifies the device own address 1.
This parameter can be a 7-bit or 10-bit address */
uint32_t FMPI2C_Ack; /*!< Enables or disables the acknowledgement.
This parameter can be a value of @ref FMPI2C_acknowledgement */
uint32_t FMPI2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
This parameter can be a value of @ref FMPI2C_acknowledged_address */
}FMPI2C_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Constants
* @{
*/
#define IS_FMPI2C_ALL_PERIPH(PERIPH) ((PERIPH) == FMPI2C1)
/** @defgroup FMPI2C_Analog_Filter
* @{
*/
#define FMPI2C_AnalogFilter_Enable ((uint32_t)0x00000000)
#define FMPI2C_AnalogFilter_Disable FMPI2C_CR1_ANFOFF
#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_AnalogFilter_Enable) || \
((FILTER) == FMPI2C_AnalogFilter_Disable))
/**
* @}
*/
/** @defgroup FMPI2C_Digital_Filter
* @{
*/
#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
/**
* @}
*/
/** @defgroup FMPI2C_mode
* @{
*/
#define FMPI2C_Mode_FMPI2C ((uint32_t)0x00000000)
#define FMPI2C_Mode_SMBusDevice FMPI2C_CR1_SMBDEN
#define FMPI2C_Mode_SMBusHost FMPI2C_CR1_SMBHEN
#define IS_FMPI2C_MODE(MODE) (((MODE) == FMPI2C_Mode_FMPI2C) || \
((MODE) == FMPI2C_Mode_SMBusDevice) || \
((MODE) == FMPI2C_Mode_SMBusHost))
/**
* @}
*/
/** @defgroup FMPI2C_acknowledgement
* @{
*/
#define FMPI2C_Ack_Enable ((uint32_t)0x00000000)
#define FMPI2C_Ack_Disable FMPI2C_CR2_NACK
#define IS_FMPI2C_ACK(ACK) (((ACK) == FMPI2C_Ack_Enable) || \
((ACK) == FMPI2C_Ack_Disable))
/**
* @}
*/
/** @defgroup FMPI2C_acknowledged_address
* @{
*/
#define FMPI2C_AcknowledgedAddress_7bit ((uint32_t)0x00000000)
#define FMPI2C_AcknowledgedAddress_10bit FMPI2C_OAR1_OA1MODE
#define IS_FMPI2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_AcknowledgedAddress_7bit) || \
((ADDRESS) == FMPI2C_AcknowledgedAddress_10bit))
/**
* @}
*/
/** @defgroup FMPI2C_own_address1
* @{
*/
#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
/**
* @}
*/
/** @defgroup FMPI2C_transfer_direction
* @{
*/
#define FMPI2C_Direction_Transmitter ((uint16_t)0x0000)
#define FMPI2C_Direction_Receiver ((uint16_t)0x0400)
#define IS_FMPI2C_DIRECTION(DIRECTION) (((DIRECTION) == FMPI2C_Direction_Transmitter) || \
((DIRECTION) == FMPI2C_Direction_Receiver))
/**
* @}
*/
/** @defgroup FMPI2C_DMA_transfer_requests
* @{
*/
#define FMPI2C_DMAReq_Tx FMPI2C_CR1_TXDMAEN
#define FMPI2C_DMAReq_Rx FMPI2C_CR1_RXDMAEN
#define IS_FMPI2C_DMA_REQ(REQ) ((((REQ) & (uint32_t)0xFFFF3FFF) == 0x00) && ((REQ) != 0x00))
/**
* @}
*/
/** @defgroup FMPI2C_slave_address
* @{
*/
#define IS_FMPI2C_SLAVE_ADDRESS(ADDRESS) ((ADDRESS) <= (uint16_t)0x03FF)
/**
* @}
*/
/** @defgroup FMPI2C_own_address2
* @{
*/
#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
/**
* @}
*/
/** @defgroup FMPI2C_own_address2_mask
* @{
*/
#define FMPI2C_OA2_NoMask ((uint8_t)0x00)
#define FMPI2C_OA2_Mask01 ((uint8_t)0x01)
#define FMPI2C_OA2_Mask02 ((uint8_t)0x02)
#define FMPI2C_OA2_Mask03 ((uint8_t)0x03)
#define FMPI2C_OA2_Mask04 ((uint8_t)0x04)
#define FMPI2C_OA2_Mask05 ((uint8_t)0x05)
#define FMPI2C_OA2_Mask06 ((uint8_t)0x06)
#define FMPI2C_OA2_Mask07 ((uint8_t)0x07)
#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NoMask) || \
((MASK) == FMPI2C_OA2_Mask01) || \
((MASK) == FMPI2C_OA2_Mask02) || \
((MASK) == FMPI2C_OA2_Mask03) || \
((MASK) == FMPI2C_OA2_Mask04) || \
((MASK) == FMPI2C_OA2_Mask05) || \
((MASK) == FMPI2C_OA2_Mask06) || \
((MASK) == FMPI2C_OA2_Mask07))
/**
* @}
*/
/** @defgroup FMPI2C_timeout
* @{
*/
#define IS_FMPI2C_TIMEOUT(TIMEOUT) ((TIMEOUT) <= (uint16_t)0x0FFF)
/**
* @}
*/
/** @defgroup FMPI2C_registers
* @{
*/
#define FMPI2C_Register_CR1 ((uint8_t)0x00)
#define FMPI2C_Register_CR2 ((uint8_t)0x04)
#define FMPI2C_Register_OAR1 ((uint8_t)0x08)
#define FMPI2C_Register_OAR2 ((uint8_t)0x0C)
#define FMPI2C_Register_TIMINGR ((uint8_t)0x10)
#define FMPI2C_Register_TIMEOUTR ((uint8_t)0x14)
#define FMPI2C_Register_ISR ((uint8_t)0x18)
#define FMPI2C_Register_ICR ((uint8_t)0x1C)
#define FMPI2C_Register_PECR ((uint8_t)0x20)
#define FMPI2C_Register_RXDR ((uint8_t)0x24)
#define FMPI2C_Register_TXDR ((uint8_t)0x28)
#define IS_FMPI2C_REGISTER(REGISTER) (((REGISTER) == FMPI2C_Register_CR1) || \
((REGISTER) == FMPI2C_Register_CR2) || \
((REGISTER) == FMPI2C_Register_OAR1) || \
((REGISTER) == FMPI2C_Register_OAR2) || \
((REGISTER) == FMPI2C_Register_TIMINGR) || \
((REGISTER) == FMPI2C_Register_TIMEOUTR) || \
((REGISTER) == FMPI2C_Register_ISR) || \
((REGISTER) == FMPI2C_Register_ICR) || \
((REGISTER) == FMPI2C_Register_PECR) || \
((REGISTER) == FMPI2C_Register_RXDR) || \
((REGISTER) == FMPI2C_Register_TXDR))
/**
* @}
*/
/** @defgroup FMPI2C_interrupts_definition
* @{
*/
#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
#define IS_FMPI2C_CONFIG_IT(IT) ((((IT) & (uint32_t)0xFFFFFF01) == 0x00) && ((IT) != 0x00))
/**
* @}
*/
/** @defgroup FMPI2C_flags_definition
* @{
*/
#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
#define FMPI2C_FLAG_NACKF FMPI2C_ISR_NACKF
#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
#define IS_FMPI2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFF4000) == 0x00) && ((FLAG) != 0x00))
#define IS_FMPI2C_GET_FLAG(FLAG) (((FLAG) == FMPI2C_FLAG_TXE) || ((FLAG) == FMPI2C_FLAG_TXIS) || \
((FLAG) == FMPI2C_FLAG_RXNE) || ((FLAG) == FMPI2C_FLAG_ADDR) || \
((FLAG) == FMPI2C_FLAG_NACKF) || ((FLAG) == FMPI2C_FLAG_STOPF) || \
((FLAG) == FMPI2C_FLAG_TC) || ((FLAG) == FMPI2C_FLAG_TCR) || \
((FLAG) == FMPI2C_FLAG_BERR) || ((FLAG) == FMPI2C_FLAG_ARLO) || \
((FLAG) == FMPI2C_FLAG_OVR) || ((FLAG) == FMPI2C_FLAG_PECERR) || \
((FLAG) == FMPI2C_FLAG_TIMEOUT) || ((FLAG) == FMPI2C_FLAG_ALERT) || \
((FLAG) == FMPI2C_FLAG_BUSY))
/**
* @}
*/
/** @defgroup FMPI2C_interrupts_definition
* @{
*/
#define FMPI2C_IT_TXIS FMPI2C_ISR_TXIS
#define FMPI2C_IT_RXNE FMPI2C_ISR_RXNE
#define FMPI2C_IT_ADDR FMPI2C_ISR_ADDR
#define FMPI2C_IT_NACKF FMPI2C_ISR_NACKF
#define FMPI2C_IT_STOPF FMPI2C_ISR_STOPF
#define FMPI2C_IT_TC FMPI2C_ISR_TC
#define FMPI2C_IT_TCR FMPI2C_ISR_TCR
#define FMPI2C_IT_BERR FMPI2C_ISR_BERR
#define FMPI2C_IT_ARLO FMPI2C_ISR_ARLO
#define FMPI2C_IT_OVR FMPI2C_ISR_OVR
#define FMPI2C_IT_PECERR FMPI2C_ISR_PECERR
#define FMPI2C_IT_TIMEOUT FMPI2C_ISR_TIMEOUT
#define FMPI2C_IT_ALERT FMPI2C_ISR_ALERT
#define IS_FMPI2C_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFFFFC001) == 0x00) && ((IT) != 0x00))
#define IS_FMPI2C_GET_IT(IT) (((IT) == FMPI2C_IT_TXIS) || ((IT) == FMPI2C_IT_RXNE) || \
((IT) == FMPI2C_IT_ADDR) || ((IT) == FMPI2C_IT_NACKF) || \
((IT) == FMPI2C_IT_STOPF) || ((IT) == FMPI2C_IT_TC) || \
((IT) == FMPI2C_IT_TCR) || ((IT) == FMPI2C_IT_BERR) || \
((IT) == FMPI2C_IT_ARLO) || ((IT) == FMPI2C_IT_OVR) || \
((IT) == FMPI2C_IT_PECERR) || ((IT) == FMPI2C_IT_TIMEOUT) || \
((IT) == FMPI2C_IT_ALERT))
/**
* @}
*/
/** @defgroup FMPI2C_ReloadEndMode_definition
* @{
*/
#define FMPI2C_Reload_Mode FMPI2C_CR2_RELOAD
#define FMPI2C_AutoEnd_Mode FMPI2C_CR2_AUTOEND
#define FMPI2C_SoftEnd_Mode ((uint32_t)0x00000000)
#define IS_RELOAD_END_MODE(MODE) (((MODE) == FMPI2C_Reload_Mode) || \
((MODE) == FMPI2C_AutoEnd_Mode) || \
((MODE) == FMPI2C_SoftEnd_Mode))
/**
* @}
*/
/** @defgroup FMPI2C_StartStopMode_definition
* @{
*/
#define FMPI2C_No_StartStop ((uint32_t)0x00000000)
#define FMPI2C_Generate_Stop FMPI2C_CR2_STOP
#define FMPI2C_Generate_Start_Read (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
#define FMPI2C_Generate_Start_Write FMPI2C_CR2_START
#define IS_START_STOP_MODE(MODE) (((MODE) == FMPI2C_Generate_Stop) || \
((MODE) == FMPI2C_Generate_Start_Read) || \
((MODE) == FMPI2C_Generate_Start_Write) || \
((MODE) == FMPI2C_No_StartStop))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Initialization and Configuration functions *********************************/
void FMPI2C_DeInit(FMPI2C_TypeDef* FMPI2Cx);
void FMPI2C_Init(FMPI2C_TypeDef* FMPI2Cx, FMPI2C_InitTypeDef* FMPI2C_InitStruct);
void FMPI2C_StructInit(FMPI2C_InitTypeDef* FMPI2C_InitStruct);
void FMPI2C_Cmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_SoftwareResetCmd(FMPI2C_TypeDef* FMPI2Cx);
void FMPI2C_ITConfig(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_IT, FunctionalState NewState);
void FMPI2C_StretchClockCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_StopModeCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_DualAddressCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_OwnAddress2Config(FMPI2C_TypeDef* FMPI2Cx, uint16_t Address, uint8_t Mask);
void FMPI2C_GeneralCallCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_SlaveByteControlCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_SlaveAddressConfig(FMPI2C_TypeDef* FMPI2Cx, uint16_t Address);
void FMPI2C_10BitAddressingModeCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
/* Communications handling functions ******************************************/
void FMPI2C_AutoEndCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_ReloadCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_NumberOfBytesConfig(FMPI2C_TypeDef* FMPI2Cx, uint8_t Number_Bytes);
void FMPI2C_MasterRequestConfig(FMPI2C_TypeDef* FMPI2Cx, uint16_t FMPI2C_Direction);
void FMPI2C_GenerateSTART(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_GenerateSTOP(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_10BitAddressHeaderCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_AcknowledgeConfig(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
uint8_t FMPI2C_GetAddressMatched(FMPI2C_TypeDef* FMPI2Cx);
uint16_t FMPI2C_GetTransferDirection(FMPI2C_TypeDef* FMPI2Cx);
void FMPI2C_TransferHandling(FMPI2C_TypeDef* FMPI2Cx, uint16_t Address, uint8_t Number_Bytes, uint32_t ReloadEndMode, uint32_t StartStopMode);
/* SMBUS management functions ************************************************/
void FMPI2C_SMBusAlertCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_ClockTimeoutCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_ExtendedClockTimeoutCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_IdleClockTimeoutCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_TimeoutAConfig(FMPI2C_TypeDef* FMPI2Cx, uint16_t Timeout);
void FMPI2C_TimeoutBConfig(FMPI2C_TypeDef* FMPI2Cx, uint16_t Timeout);
void FMPI2C_CalculatePEC(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
void FMPI2C_PECRequestCmd(FMPI2C_TypeDef* FMPI2Cx, FunctionalState NewState);
uint8_t FMPI2C_GetPEC(FMPI2C_TypeDef* FMPI2Cx);
/* FMPI2C registers management functions **************************************/
uint32_t FMPI2C_ReadRegister(FMPI2C_TypeDef* FMPI2Cx, uint8_t FMPI2C_Register);
/* Data transfers management functions ****************************************/
void FMPI2C_SendData(FMPI2C_TypeDef* FMPI2Cx, uint8_t Data);
uint8_t FMPI2C_ReceiveData(FMPI2C_TypeDef* FMPI2Cx);
/* DMA transfers management functions *****************************************/
void FMPI2C_DMACmd(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
FlagStatus FMPI2C_GetFlagStatus(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_FLAG);
void FMPI2C_ClearFlag(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_FLAG);
ITStatus FMPI2C_GetITStatus(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_IT);
void FMPI2C_ClearITPendingBit(FMPI2C_TypeDef* FMPI2Cx, uint32_t FMPI2C_IT);
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_FMPI2C_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

675
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_fsmc.h Normal file
View file

@ -0,0 +1,675 @@
/**
******************************************************************************
* @file stm32f4xx_fsmc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the FSMC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_FSMC_H
#define __STM32F4xx_FSMC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup FSMC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief Timing parameters For NOR/SRAM Banks
*/
typedef struct
{
uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address setup time.
This parameter can be a value between 0 and 0xF.
@note This parameter is not used with synchronous NOR Flash memories. */
uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address hold time.
This parameter can be a value between 0 and 0xF.
@note This parameter is not used with synchronous NOR Flash memories.*/
uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data setup time.
This parameter can be a value between 0 and 0xFF.
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
the duration of the bus turnaround.
This parameter can be a value between 0 and 0xF.
@note This parameter is only used for multiplexed NOR Flash memories. */
uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
This parameter can be a value between 1 and 0xF.
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue
to the memory before getting the first data.
The parameter value depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between 0 and 0xF in NOR Flash memories
with synchronous burst mode enable */
uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode.
This parameter can be a value of @ref FSMC_Access_Mode */
}FSMC_NORSRAMTimingInitTypeDef;
/**
* @brief FSMC NOR/SRAM Init structure definition
*/
typedef struct
{
uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used.
This parameter can be a value of @ref FSMC_NORSRAM_Bank */
uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are
multiplexed on the data bus or not.
This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to
the corresponding memory bank.
This parameter can be a value of @ref FSMC_Memory_Type */
uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be a value of @ref FSMC_Data_Width */
uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
valid only with synchronous burst Flash memories.
This parameter can be a value of @ref FSMC_Burst_Access_Mode */
uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
valid only with asynchronous Flash memories.
This parameter can be a value of @ref FSMC_AsynchronousWait */
uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
the Flash memory in burst mode.
This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
memory, valid only when accessing Flash memories in burst mode.
This parameter can be a value of @ref FSMC_Wrap_Mode */
uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
clock cycle before the wait state or during the wait state,
valid only when accessing memories in burst mode.
This parameter can be a value of @ref FSMC_Wait_Timing */
uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC.
This parameter can be a value of @ref FSMC_Write_Operation */
uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait state insertion via wait
signal, valid for Flash memory access in burst mode.
This parameter can be a value of @ref FSMC_Wait_Signal */
uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode.
This parameter can be a value of @ref FSMC_Extended_Mode */
uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation.
This parameter can be a value of @ref FSMC_Write_Burst */
FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the Extended Mode is not used*/
FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the Extended Mode is used*/
}FSMC_NORSRAMInitTypeDef;
/**
* @brief Timing parameters For FSMC NAND and PCCARD Banks
*/
typedef struct
{
uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before
the command assertion for NAND Flash read or write access
to common/Attribute or I/O memory space (depending on
the memory space timing to be configured).
This parameter can be a value between 0 and 0xFF.*/
uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
command for NAND Flash read or write access to
common/Attribute or I/O memory space (depending on the
memory space timing to be configured).
This parameter can be a number between 0x00 and 0xFF */
uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
(and data for write access) after the command de-assertion
for NAND Flash read or write access to common/Attribute
or I/O memory space (depending on the memory space timing
to be configured).
This parameter can be a number between 0x00 and 0xFF */
uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
data bus is kept in HiZ after the start of a NAND Flash
write access to common/Attribute or I/O memory space (depending
on the memory space timing to be configured).
This parameter can be a number between 0x00 and 0xFF */
}FSMC_NAND_PCCARDTimingInitTypeDef;
/**
* @brief FSMC NAND Init structure definition
*/
typedef struct
{
uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used.
This parameter can be a value of @ref FSMC_NAND_Bank */
uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank.
This parameter can be any value of @ref FSMC_Wait_feature */
uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be any value of @ref FSMC_Data_Width */
uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation.
This parameter can be any value of @ref FSMC_ECC */
uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC.
This parameter can be any value of @ref FSMC_ECC_Page_Size */
uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between 0 and 0xFF. */
uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between 0x0 and 0xFF */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
}FSMC_NANDInitTypeDef;
/**
* @brief FSMC PCCARD Init structure definition
*/
typedef struct
{
uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank.
This parameter can be any value of @ref FSMC_Wait_feature */
uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between 0 and 0xFF. */
uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between 0x0 and 0xFF */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */
}FSMC_PCCARDInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FSMC_Exported_Constants
* @{
*/
/** @defgroup FSMC_NORSRAM_Bank
* @{
*/
#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000)
#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002)
#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004)
#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006)
/**
* @}
*/
/** @defgroup FSMC_NAND_Bank
* @{
*/
#define FSMC_Bank2_NAND ((uint32_t)0x00000010)
#define FSMC_Bank3_NAND ((uint32_t)0x00000100)
/**
* @}
*/
/** @defgroup FSMC_PCCARD_Bank
* @{
*/
#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000)
/**
* @}
*/
#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
((BANK) == FSMC_Bank1_NORSRAM2) || \
((BANK) == FSMC_Bank1_NORSRAM3) || \
((BANK) == FSMC_Bank1_NORSRAM4))
#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND))
#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND) || \
((BANK) == FSMC_Bank4_PCCARD))
#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
((BANK) == FSMC_Bank3_NAND) || \
((BANK) == FSMC_Bank4_PCCARD))
/** @defgroup FSMC_NOR_SRAM_Controller
* @{
*/
/** @defgroup FSMC_Data_Address_Bus_Multiplexing
* @{
*/
#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000)
#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002)
#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
((MUX) == FSMC_DataAddressMux_Enable))
/**
* @}
*/
/** @defgroup FSMC_Memory_Type
* @{
*/
#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000)
#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004)
#define FSMC_MemoryType_NOR ((uint32_t)0x00000008)
#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
((MEMORY) == FSMC_MemoryType_PSRAM)|| \
((MEMORY) == FSMC_MemoryType_NOR))
/**
* @}
*/
/** @defgroup FSMC_Data_Width
* @{
*/
#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000)
#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010)
#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
((WIDTH) == FSMC_MemoryDataWidth_16b))
/**
* @}
*/
/** @defgroup FSMC_Burst_Access_Mode
* @{
*/
#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000)
#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100)
#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
((STATE) == FSMC_BurstAccessMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_AsynchronousWait
* @{
*/
#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000)
#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000)
#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
((STATE) == FSMC_AsynchronousWait_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Signal_Polarity
* @{
*/
#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000)
#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200)
#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
((POLARITY) == FSMC_WaitSignalPolarity_High))
/**
* @}
*/
/** @defgroup FSMC_Wrap_Mode
* @{
*/
#define FSMC_WrapMode_Disable ((uint32_t)0x00000000)
#define FSMC_WrapMode_Enable ((uint32_t)0x00000400)
#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
((MODE) == FSMC_WrapMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Timing
* @{
*/
#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000)
#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800)
#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
/**
* @}
*/
/** @defgroup FSMC_Write_Operation
* @{
*/
#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000)
#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000)
#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
((OPERATION) == FSMC_WriteOperation_Enable))
/**
* @}
*/
/** @defgroup FSMC_Wait_Signal
* @{
*/
#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000)
#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000)
#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
((SIGNAL) == FSMC_WaitSignal_Enable))
/**
* @}
*/
/** @defgroup FSMC_Extended_Mode
* @{
*/
#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000)
#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000)
#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
((MODE) == FSMC_ExtendedMode_Enable))
/**
* @}
*/
/** @defgroup FSMC_Write_Burst
* @{
*/
#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000)
#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000)
#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
((BURST) == FSMC_WriteBurst_Enable))
/**
* @}
*/
/** @defgroup FSMC_Address_Setup_Time
* @{
*/
#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Address_Hold_Time
* @{
*/
#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Data_Setup_Time
* @{
*/
#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
/**
* @}
*/
/** @defgroup FSMC_Bus_Turn_around_Duration
* @{
*/
#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_CLK_Division
* @{
*/
#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Data_Latency
* @{
*/
#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
/**
* @}
*/
/** @defgroup FSMC_Access_Mode
* @{
*/
#define FSMC_AccessMode_A ((uint32_t)0x00000000)
#define FSMC_AccessMode_B ((uint32_t)0x10000000)
#define FSMC_AccessMode_C ((uint32_t)0x20000000)
#define FSMC_AccessMode_D ((uint32_t)0x30000000)
#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
((MODE) == FSMC_AccessMode_B) || \
((MODE) == FSMC_AccessMode_C) || \
((MODE) == FSMC_AccessMode_D))
/**
* @}
*/
/**
* @}
*/
/** @defgroup FSMC_NAND_PCCARD_Controller
* @{
*/
/** @defgroup FSMC_Wait_feature
* @{
*/
#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000)
#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002)
#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
((FEATURE) == FSMC_Waitfeature_Enable))
/**
* @}
*/
/** @defgroup FSMC_ECC
* @{
*/
#define FSMC_ECC_Disable ((uint32_t)0x00000000)
#define FSMC_ECC_Enable ((uint32_t)0x00000040)
#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
((STATE) == FSMC_ECC_Enable))
/**
* @}
*/
/** @defgroup FSMC_ECC_Page_Size
* @{
*/
#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000)
#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000)
#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000)
#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000)
#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000)
#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000)
#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
((SIZE) == FSMC_ECCPageSize_512Bytes) || \
((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
((SIZE) == FSMC_ECCPageSize_8192Bytes))
/**
* @}
*/
/** @defgroup FSMC_TCLR_Setup_Time
* @{
*/
#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_TAR_Setup_Time
* @{
*/
#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Setup_Time
* @{
*/
#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Wait_Setup_Time
* @{
*/
#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Hold_Setup_Time
* @{
*/
#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_HiZ_Setup_Time
* @{
*/
#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
/**
* @}
*/
/** @defgroup FSMC_Interrupt_sources
* @{
*/
#define FSMC_IT_RisingEdge ((uint32_t)0x00000008)
#define FSMC_IT_Level ((uint32_t)0x00000010)
#define FSMC_IT_FallingEdge ((uint32_t)0x00000020)
#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
((IT) == FSMC_IT_Level) || \
((IT) == FSMC_IT_FallingEdge))
/**
* @}
*/
/** @defgroup FSMC_Flags
* @{
*/
#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001)
#define FSMC_FLAG_Level ((uint32_t)0x00000002)
#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004)
#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
((FLAG) == FSMC_FLAG_Level) || \
((FLAG) == FSMC_FLAG_FallingEdge) || \
((FLAG) == FSMC_FLAG_FEMPT))
#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* NOR/SRAM Controller functions **********************************************/
void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
/* NAND Controller functions **************************************************/
void FSMC_NANDDeInit(uint32_t FSMC_Bank);
void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
/* PCCARD Controller functions ************************************************/
void FSMC_PCCARDDeInit(void);
void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
void FSMC_PCCARDCmd(FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_FSMC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

529
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_gpio.h Normal file
View file

@ -0,0 +1,529 @@
/**
******************************************************************************
* @file stm32f4xx_gpio.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the GPIO firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_GPIO_H
#define __STM32F4xx_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
((PERIPH) == GPIOB) || \
((PERIPH) == GPIOC) || \
((PERIPH) == GPIOD) || \
((PERIPH) == GPIOE) || \
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG) || \
((PERIPH) == GPIOH) || \
((PERIPH) == GPIOI) || \
((PERIPH) == GPIOJ) || \
((PERIPH) == GPIOK))
/**
* @brief GPIO Configuration Mode enumeration
*/
typedef enum
{
GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */
}GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \
((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
/**
* @brief GPIO Output type enumeration
*/
typedef enum
{
GPIO_OType_PP = 0x00,
GPIO_OType_OD = 0x01
}GPIOOType_TypeDef;
#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
/**
* @brief GPIO Output Maximum frequency enumeration
*/
typedef enum
{
GPIO_Low_Speed = 0x00, /*!< Low speed */
GPIO_Medium_Speed = 0x01, /*!< Medium speed */
GPIO_Fast_Speed = 0x02, /*!< Fast speed */
GPIO_High_Speed = 0x03 /*!< High speed */
}GPIOSpeed_TypeDef;
/* Add legacy definition */
#define GPIO_Speed_2MHz GPIO_Low_Speed
#define GPIO_Speed_25MHz GPIO_Medium_Speed
#define GPIO_Speed_50MHz GPIO_Fast_Speed
#define GPIO_Speed_100MHz GPIO_High_Speed
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Low_Speed) || ((SPEED) == GPIO_Medium_Speed) || \
((SPEED) == GPIO_Fast_Speed)|| ((SPEED) == GPIO_High_Speed))
/**
* @brief GPIO Configuration PullUp PullDown enumeration
*/
typedef enum
{
GPIO_PuPd_NOPULL = 0x00,
GPIO_PuPd_UP = 0x01,
GPIO_PuPd_DOWN = 0x02
}GPIOPuPd_TypeDef;
#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
((PUPD) == GPIO_PuPd_DOWN))
/**
* @brief GPIO Bit SET and Bit RESET enumeration
*/
typedef enum
{
Bit_RESET = 0,
Bit_SET
}BitAction;
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
This parameter can be a value of @ref GPIOOType_TypeDef */
GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
This parameter can be a value of @ref GPIOPuPd_TypeDef */
}GPIO_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_Exported_Constants
* @{
*/
/** @defgroup GPIO_pins_define
* @{
*/
#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
((PIN) == GPIO_Pin_1) || \
((PIN) == GPIO_Pin_2) || \
((PIN) == GPIO_Pin_3) || \
((PIN) == GPIO_Pin_4) || \
((PIN) == GPIO_Pin_5) || \
((PIN) == GPIO_Pin_6) || \
((PIN) == GPIO_Pin_7) || \
((PIN) == GPIO_Pin_8) || \
((PIN) == GPIO_Pin_9) || \
((PIN) == GPIO_Pin_10) || \
((PIN) == GPIO_Pin_11) || \
((PIN) == GPIO_Pin_12) || \
((PIN) == GPIO_Pin_13) || \
((PIN) == GPIO_Pin_14) || \
((PIN) == GPIO_Pin_15))
/**
* @}
*/
/** @defgroup GPIO_Pin_sources
* @{
*/
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
((PINSOURCE) == GPIO_PinSource1) || \
((PINSOURCE) == GPIO_PinSource2) || \
((PINSOURCE) == GPIO_PinSource3) || \
((PINSOURCE) == GPIO_PinSource4) || \
((PINSOURCE) == GPIO_PinSource5) || \
((PINSOURCE) == GPIO_PinSource6) || \
((PINSOURCE) == GPIO_PinSource7) || \
((PINSOURCE) == GPIO_PinSource8) || \
((PINSOURCE) == GPIO_PinSource9) || \
((PINSOURCE) == GPIO_PinSource10) || \
((PINSOURCE) == GPIO_PinSource11) || \
((PINSOURCE) == GPIO_PinSource12) || \
((PINSOURCE) == GPIO_PinSource13) || \
((PINSOURCE) == GPIO_PinSource14) || \
((PINSOURCE) == GPIO_PinSource15))
/**
* @}
*/
/** @defgroup GPIO_Alternat_function_selection_define
* @{
*/
/**
* @brief AF 0 selection
*/
#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF0_TIM2 ((uint8_t)0x00) /* TIM2 Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 1 selection
*/
#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
/**
* @brief AF 2 selection
*/
#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
/**
* @brief AF 3 selection
*/
#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 4 selection
*/
#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */
#define GPIO_AF_FMPI2C ((uint8_t)0x04) /* FMPI2C Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 5 selection
*/
#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping (Only for STM32F411xE Devices) */
#define GPIO_AF_SPI4 ((uint8_t)0x05) /* SPI4/I2S4 Alternate Function mapping */
#define GPIO_AF_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2 Alternate Function mapping (Only for STM32F411xE Devices) */
#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping (Only for STM32F411xE Devices) */
#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5 Alternate Function mapping (Only for STM32F411xE Devices) */
#define GPIO_AF_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3ext Alternate Function mapping */
/**
* @brief AF 7 selection Legacy
*/
#define GPIO_AF_I2S3ext GPIO_AF7_SPI3
/**
* @brief AF 8 selection
*/
#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
#define GPIO_AF_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */
#define GPIO_AF_SPDIF ((uint8_t)0x08) /* SPDIF Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 9 selection
*/
#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping (Only for STM32F401xx/STM32F411xE Devices) */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping (Only for STM32F401xx/STM32F411xE Devices) */
#if defined (STM32F446xx)
#define GPIO_AF9_SAI2 ((uint8_t)0x09) /* SAI2 Alternate Function mapping */
#endif /* STM32F446xx */
#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF9_QUADSPI ((uint8_t)0x09) /* QuadSPI Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 10 selection
*/
#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
#if defined (STM32F446xx)
#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */
#endif /* STM32F446xx */
#if defined (STM32F446xx)
#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QuadSPI Alternate Function mapping */
#endif /* STM32F446xx */
/**
* @brief AF 11 selection
*/
#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
/**
* @brief AF 12 selection
*/
#if defined (STM32F40_41xxx)
#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
#endif /* STM32F40_41xxx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F446xx)
#define GPIO_AF_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx */
#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#if defined (STM32F40_41xxx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_FSMC))
#endif /* STM32F40_41xxx */
#if defined (STM32F401xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4))
#endif /* STM32F401xx */
#if defined (STM32F411xE)
#define IS_GPIO_AF(AF) (((AF) < 16) && ((AF) != 11) && ((AF) != 13) && ((AF) != 14))
#endif /* STM32F411xE */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4) || \
((AF) == GPIO_AF_SPI5) || ((AF) == GPIO_AF_SPI6) || \
((AF) == GPIO_AF_UART7) || ((AF) == GPIO_AF_UART8) || \
((AF) == GPIO_AF_FMC) || ((AF) == GPIO_AF_SAI1) || \
((AF) == GPIO_AF_LTDC))
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined (STM32F446xx)
#define IS_GPIO_AF(AF) (((AF) < 16) && ((AF) != 11) && ((AF) != 14))
#endif /* STM32F446xx */
/**
* @}
*/
/** @defgroup GPIO_Legacy
* @{
*/
#define GPIO_Mode_AIN GPIO_Mode_AN
#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS
#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS
#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the GPIO configuration to the default reset state ****/
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
/* Initialization and Configuration functions *********************************/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Read and Write functions **********************************************/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
/* GPIO Alternate functions configuration function ****************************/
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_GPIO_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

257
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_hash.h Normal file
View file

@ -0,0 +1,257 @@
/**
******************************************************************************
* @file stm32f4xx_hash.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the HASH
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HASH_H
#define __STM32F4xx_HASH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup HASH
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief HASH Init structure definition
*/
typedef struct
{
uint32_t HASH_AlgoSelection; /*!< SHA-1, SHA-224, SHA-256 or MD5. This parameter
can be a value of @ref HASH_Algo_Selection */
uint32_t HASH_AlgoMode; /*!< HASH or HMAC. This parameter can be a value
of @ref HASH_processor_Algorithm_Mode */
uint32_t HASH_DataType; /*!< 32-bit data, 16-bit data, 8-bit data or
bit string. This parameter can be a value of
@ref HASH_Data_Type */
uint32_t HASH_HMACKeyType; /*!< HMAC Short key or HMAC Long Key. This parameter
can be a value of @ref HASH_HMAC_Long_key_only_for_HMAC_mode */
}HASH_InitTypeDef;
/**
* @brief HASH message digest result structure definition
*/
typedef struct
{
uint32_t Data[8]; /*!< Message digest result : 8x 32bit wors for SHA-256,
7x 32bit wors for SHA-224,
5x 32bit words for SHA-1 or
4x 32bit words for MD5 */
} HASH_MsgDigest;
/**
* @brief HASH context swapping structure definition
*/
typedef struct
{
uint32_t HASH_IMR;
uint32_t HASH_STR;
uint32_t HASH_CR;
uint32_t HASH_CSR[54];
}HASH_Context;
/* Exported constants --------------------------------------------------------*/
/** @defgroup HASH_Exported_Constants
* @{
*/
/** @defgroup HASH_Algo_Selection
* @{
*/
#define HASH_AlgoSelection_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */
#define HASH_AlgoSelection_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
#define HASH_AlgoSelection_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
#define HASH_AlgoSelection_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
((ALGOSELECTION) == HASH_AlgoSelection_SHA224) || \
((ALGOSELECTION) == HASH_AlgoSelection_SHA256) || \
((ALGOSELECTION) == HASH_AlgoSelection_MD5))
/**
* @}
*/
/** @defgroup HASH_processor_Algorithm_Mode
* @{
*/
#define HASH_AlgoMode_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */
#define HASH_AlgoMode_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
((ALGOMODE) == HASH_AlgoMode_HMAC))
/**
* @}
*/
/** @defgroup HASH_Data_Type
* @{
*/
#define HASH_DataType_32b ((uint32_t)0x0000) /*!< 32-bit data. No swapping */
#define HASH_DataType_16b HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
#define HASH_DataType_8b HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
#define HASH_DataType_1b HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DataType_32b)|| \
((DATATYPE) == HASH_DataType_16b)|| \
((DATATYPE) == HASH_DataType_8b) || \
((DATATYPE) == HASH_DataType_1b))
/**
* @}
*/
/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode
* @{
*/
#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
#define HASH_HMACKeyType_LongKey HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
((KEYTYPE) == HASH_HMACKeyType_LongKey))
/**
* @}
*/
/** @defgroup Number_of_valid_bits_in_last_word_of_the_message
* @{
*/
#define IS_HASH_VALIDBITSNUMBER(VALIDBITS) ((VALIDBITS) <= 0x1F)
/**
* @}
*/
/** @defgroup HASH_interrupts_definition
* @{
*/
#define HASH_IT_DINI HASH_IMR_DINIM /*!< A new block can be entered into the input buffer (DIN) */
#define HASH_IT_DCI HASH_IMR_DCIM /*!< Digest calculation complete */
#define IS_HASH_IT(IT) ((((IT) & (uint32_t)0xFFFFFFFC) == 0x00000000) && ((IT) != 0x00000000))
#define IS_HASH_GET_IT(IT) (((IT) == HASH_IT_DINI) || ((IT) == HASH_IT_DCI))
/**
* @}
*/
/** @defgroup HASH_flags_definition
* @{
*/
#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
#define IS_HASH_GET_FLAG(FLAG) (((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS) || \
((FLAG) == HASH_FLAG_DMAS) || \
((FLAG) == HASH_FLAG_BUSY) || \
((FLAG) == HASH_FLAG_DINNE))
#define IS_HASH_CLEAR_FLAG(FLAG)(((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the HASH configuration to the default reset state ****/
void HASH_DeInit(void);
/* HASH Configuration function ************************************************/
void HASH_Init(HASH_InitTypeDef* HASH_InitStruct);
void HASH_StructInit(HASH_InitTypeDef* HASH_InitStruct);
void HASH_Reset(void);
/* HASH Message Digest generation functions ***********************************/
void HASH_DataIn(uint32_t Data);
uint8_t HASH_GetInFIFOWordsNbr(void);
void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber);
void HASH_StartDigest(void);
void HASH_AutoStartDigest(FunctionalState NewState);
void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest);
/* HASH Context swapping functions ********************************************/
void HASH_SaveContext(HASH_Context* HASH_ContextSave);
void HASH_RestoreContext(HASH_Context* HASH_ContextRestore);
/* HASH DMA interface function ************************************************/
void HASH_DMACmd(FunctionalState NewState);
/* HASH Interrupts and flags management functions *****************************/
void HASH_ITConfig(uint32_t HASH_IT, FunctionalState NewState);
FlagStatus HASH_GetFlagStatus(uint32_t HASH_FLAG);
void HASH_ClearFlag(uint32_t HASH_FLAG);
ITStatus HASH_GetITStatus(uint32_t HASH_IT);
void HASH_ClearITPendingBit(uint32_t HASH_IT);
/* High Level SHA1 functions **************************************************/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]);
ErrorStatus HMAC_SHA1(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[20]);
/* High Level MD5 functions ***************************************************/
ErrorStatus HASH_MD5(uint8_t *Input, uint32_t Ilen, uint8_t Output[16]);
ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen,
uint8_t *Input, uint32_t Ilen,
uint8_t Output[16]);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_HASH_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

710
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_i2c.h Normal file
View file

@ -0,0 +1,710 @@
/**
******************************************************************************
* @file stm32f4xx_i2c.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the I2C firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_I2C_H
#define __STM32F4xx_I2C_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup I2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief I2C Init structure definition
*/
typedef struct
{
uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency.
This parameter must be set to a value lower than 400kHz */
uint16_t I2C_Mode; /*!< Specifies the I2C mode.
This parameter can be a value of @ref I2C_mode */
uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement.
This parameter can be a value of @ref I2C_acknowledgement */
uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
This parameter can be a value of @ref I2C_acknowledged_address */
}I2C_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup I2C_Exported_Constants
* @{
*/
#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
((PERIPH) == I2C2) || \
((PERIPH) == I2C3))
/** @defgroup I2C_Digital_Filter
* @{
*/
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
/**
* @}
*/
/** @defgroup I2C_mode
* @{
*/
#define I2C_Mode_I2C ((uint16_t)0x0000)
#define I2C_Mode_SMBusDevice ((uint16_t)0x0002)
#define I2C_Mode_SMBusHost ((uint16_t)0x000A)
#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
((MODE) == I2C_Mode_SMBusDevice) || \
((MODE) == I2C_Mode_SMBusHost))
/**
* @}
*/
/** @defgroup I2C_duty_cycle_in_fast_mode
* @{
*/
#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
((CYCLE) == I2C_DutyCycle_2))
/**
* @}
*/
/** @defgroup I2C_acknowledgement
* @{
*/
#define I2C_Ack_Enable ((uint16_t)0x0400)
#define I2C_Ack_Disable ((uint16_t)0x0000)
#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
((STATE) == I2C_Ack_Disable))
/**
* @}
*/
/** @defgroup I2C_transfer_direction
* @{
*/
#define I2C_Direction_Transmitter ((uint8_t)0x00)
#define I2C_Direction_Receiver ((uint8_t)0x01)
#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
((DIRECTION) == I2C_Direction_Receiver))
/**
* @}
*/
/** @defgroup I2C_acknowledged_address
* @{
*/
#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000)
#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000)
#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
((ADDRESS) == I2C_AcknowledgedAddress_10bit))
/**
* @}
*/
/** @defgroup I2C_registers
* @{
*/
#define I2C_Register_CR1 ((uint8_t)0x00)
#define I2C_Register_CR2 ((uint8_t)0x04)
#define I2C_Register_OAR1 ((uint8_t)0x08)
#define I2C_Register_OAR2 ((uint8_t)0x0C)
#define I2C_Register_DR ((uint8_t)0x10)
#define I2C_Register_SR1 ((uint8_t)0x14)
#define I2C_Register_SR2 ((uint8_t)0x18)
#define I2C_Register_CCR ((uint8_t)0x1C)
#define I2C_Register_TRISE ((uint8_t)0x20)
#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
((REGISTER) == I2C_Register_CR2) || \
((REGISTER) == I2C_Register_OAR1) || \
((REGISTER) == I2C_Register_OAR2) || \
((REGISTER) == I2C_Register_DR) || \
((REGISTER) == I2C_Register_SR1) || \
((REGISTER) == I2C_Register_SR2) || \
((REGISTER) == I2C_Register_CCR) || \
((REGISTER) == I2C_Register_TRISE))
/**
* @}
*/
/** @defgroup I2C_NACK_position
* @{
*/
#define I2C_NACKPosition_Next ((uint16_t)0x0800)
#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
((POSITION) == I2C_NACKPosition_Current))
/**
* @}
*/
/** @defgroup I2C_SMBus_alert_pin_level
* @{
*/
#define I2C_SMBusAlert_Low ((uint16_t)0x2000)
#define I2C_SMBusAlert_High ((uint16_t)0xDFFF)
#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
((ALERT) == I2C_SMBusAlert_High))
/**
* @}
*/
/** @defgroup I2C_PEC_position
* @{
*/
#define I2C_PECPosition_Next ((uint16_t)0x0800)
#define I2C_PECPosition_Current ((uint16_t)0xF7FF)
#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
((POSITION) == I2C_PECPosition_Current))
/**
* @}
*/
/** @defgroup I2C_interrupts_definition
* @{
*/
#define I2C_IT_BUF ((uint16_t)0x0400)
#define I2C_IT_EVT ((uint16_t)0x0200)
#define I2C_IT_ERR ((uint16_t)0x0100)
#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
/**
* @}
*/
/** @defgroup I2C_interrupts_definition
* @{
*/
#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
#define I2C_IT_PECERR ((uint32_t)0x01001000)
#define I2C_IT_OVR ((uint32_t)0x01000800)
#define I2C_IT_AF ((uint32_t)0x01000400)
#define I2C_IT_ARLO ((uint32_t)0x01000200)
#define I2C_IT_BERR ((uint32_t)0x01000100)
#define I2C_IT_TXE ((uint32_t)0x06000080)
#define I2C_IT_RXNE ((uint32_t)0x06000040)
#define I2C_IT_STOPF ((uint32_t)0x02000010)
#define I2C_IT_ADD10 ((uint32_t)0x02000008)
#define I2C_IT_BTF ((uint32_t)0x02000004)
#define I2C_IT_ADDR ((uint32_t)0x02000002)
#define I2C_IT_SB ((uint32_t)0x02000001)
#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
/**
* @}
*/
/** @defgroup I2C_flags_definition
* @{
*/
/**
* @brief SR2 register flags
*/
#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
#define I2C_FLAG_TRA ((uint32_t)0x00040000)
#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
#define I2C_FLAG_MSL ((uint32_t)0x00010000)
/**
* @brief SR1 register flags
*/
#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
#define I2C_FLAG_OVR ((uint32_t)0x10000800)
#define I2C_FLAG_AF ((uint32_t)0x10000400)
#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
#define I2C_FLAG_BERR ((uint32_t)0x10000100)
#define I2C_FLAG_TXE ((uint32_t)0x10000080)
#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
#define I2C_FLAG_BTF ((uint32_t)0x10000004)
#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
#define I2C_FLAG_SB ((uint32_t)0x10000001)
#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
((FLAG) == I2C_FLAG_SB))
/**
* @}
*/
/** @defgroup I2C_Events
* @{
*/
/**
===============================================================================
I2C Master Events (Events grouped in order of communication)
===============================================================================
*/
/**
* @brief Communication start
*
* After sending the START condition (I2C_GenerateSTART() function) the master
* has to wait for this event. It means that the Start condition has been correctly
* released on the I2C bus (the bus is free, no other devices is communicating).
*
*/
/* --EV5 */
#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
/**
* @brief Address Acknowledge
*
* After checking on EV5 (start condition correctly released on the bus), the
* master sends the address of the slave(s) with which it will communicate
* (I2C_Send7bitAddress() function, it also determines the direction of the communication:
* Master transmitter or Receiver). Then the master has to wait that a slave acknowledges
* his address. If an acknowledge is sent on the bus, one of the following events will
* be set:
*
* 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED
* event is set.
*
* 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED
* is set
*
* 3) In case of 10-Bit addressing mode, the master (just after generating the START
* and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData()
* function). Then master should wait on EV9. It means that the 10-bit addressing
* header has been correctly sent on the bus. Then master should send the second part of
* the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master
* should wait for event EV6.
*
*/
/* --EV6 */
#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
/* --EV9 */
#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
/**
* @brief Communication events
*
* If a communication is established (START condition generated and slave address
* acknowledged) then the master has to check on one of the following events for
* communication procedures:
*
* 1) Master Receiver mode: The master has to wait on the event EV7 then to read
* the data received from the slave (I2C_ReceiveData() function).
*
* 2) Master Transmitter mode: The master has to send data (I2C_SendData()
* function) then to wait on event EV8 or EV8_2.
* These two events are similar:
* - EV8 means that the data has been written in the data register and is
* being shifted out.
* - EV8_2 means that the data has been physically shifted out and output
* on the bus.
* In most cases, using EV8 is sufficient for the application.
* Using EV8_2 leads to a slower communication but ensure more reliable test.
* EV8_2 is also more suitable than EV8 for testing on the last data transmission
* (before Stop condition generation).
*
* @note In case the user software does not guarantee that this event EV7 is
* managed before the current byte end of transfer, then user may check on EV7
* and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
* In this case the communication may be slower.
*
*/
/* Master RECEIVER mode -----------------------------*/
/* --EV7 */
#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
/* Master TRANSMITTER mode --------------------------*/
/* --EV8 */
#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
/* --EV8_2 */
#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
/**
===============================================================================
I2C Slave Events (Events grouped in order of communication)
===============================================================================
*/
/**
* @brief Communication start events
*
* Wait on one of these events at the start of the communication. It means that
* the I2C peripheral detected a Start condition on the bus (generated by master
* device) followed by the peripheral address. The peripheral generates an ACK
* condition on the bus (if the acknowledge feature is enabled through function
* I2C_AcknowledgeConfig()) and the events listed above are set :
*
* 1) In normal case (only one address managed by the slave), when the address
* sent by the master matches the own address of the peripheral (configured by
* I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set
* (where XXX could be TRANSMITTER or RECEIVER).
*
* 2) In case the address sent by the master matches the second address of the
* peripheral (configured by the function I2C_OwnAddress2Config() and enabled
* by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED
* (where XXX could be TRANSMITTER or RECEIVER) are set.
*
* 3) In case the address sent by the master is General Call (address 0x00) and
* if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd())
* the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.
*
*/
/* --EV1 (all the events below are variants of EV1) */
/* 1) Case of One Single Address managed by the slave */
#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
/* 2) Case of Dual address managed by the slave */
#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
/* 3) Case of General Call enabled for the slave */
#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
/**
* @brief Communication events
*
* Wait on one of these events when EV1 has already been checked and:
*
* - Slave RECEIVER mode:
* - EV2: When the application is expecting a data byte to be received.
* - EV4: When the application is expecting the end of the communication: master
* sends a stop condition and data transmission is stopped.
*
* - Slave Transmitter mode:
* - EV3: When a byte has been transmitted by the slave and the application is expecting
* the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
* I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
* used when the user software doesn't guarantee the EV3 is managed before the
* current byte end of transfer.
* - EV3_2: When the master sends a NACK in order to tell slave that data transmission
* shall end (before sending the STOP condition). In this case slave has to stop sending
* data bytes and expect a Stop condition on the bus.
*
* @note In case the user software does not guarantee that the event EV2 is
* managed before the current byte end of transfer, then user may check on EV2
* and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
* In this case the communication may be slower.
*
*/
/* Slave RECEIVER mode --------------------------*/
/* --EV2 */
#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
/* --EV4 */
#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
/* Slave TRANSMITTER mode -----------------------*/
/* --EV3 */
#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
/* --EV3_2 */
#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
/*
===============================================================================
End of Events Description
===============================================================================
*/
#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
/**
* @}
*/
/** @defgroup I2C_own_address1
* @{
*/
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
/**
* @}
*/
/** @defgroup I2C_clock_speed
* @{
*/
#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the I2C configuration to the default reset state *****/
void I2C_DeInit(I2C_TypeDef* I2Cx);
/* Initialization and Configuration functions *********************************/
void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_DigitalFilterConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DigitalFilter);
void I2C_AnalogFilterCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
/* Data transfers functions ***************************************************/
void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
/* PEC management functions ***************************************************/
void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
/* DMA transfers management functions *****************************************/
void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
/* Interrupts, events and flags management functions **************************/
uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
/*
===============================================================================
I2C State Monitoring Functions
===============================================================================
This I2C driver provides three different ways for I2C state monitoring
depending on the application requirements and constraints:
1. Basic state monitoring (Using I2C_CheckEvent() function)
-----------------------------------------------------------
It compares the status registers (SR1 and SR2) content to a given event
(can be the combination of one or more flags).
It returns SUCCESS if the current status includes the given flags
and returns ERROR if one or more flags are missing in the current status.
- When to use
- This function is suitable for most applications as well as for startup
activity since the events are fully described in the product reference
manual (RM0090).
- It is also suitable for users who need to define their own events.
- Limitations
- If an error occurs (ie. error flags are set besides to the monitored
flags), the I2C_CheckEvent() function may return SUCCESS despite
the communication hold or corrupted real state.
In this case, it is advised to use error interrupts to monitor
the error events and handle them in the interrupt IRQ handler.
Note
For error management, it is advised to use the following functions:
- I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
- I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
Where x is the peripheral instance (I2C1, I2C2 ...)
- I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the
I2Cx_ER_IRQHandler() function in order to determine which error occurred.
- I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
and/or I2C_GenerateStop() in order to clear the error flag and source
and return to correct communication status.
2. Advanced state monitoring (Using the function I2C_GetLastEvent())
--------------------------------------------------------------------
Using the function I2C_GetLastEvent() which returns the image of both status
registers in a single word (uint32_t) (Status Register 2 value is shifted left
by 16 bits and concatenated to Status Register 1).
- When to use
- This function is suitable for the same applications above but it
allows to overcome the mentioned limitation of I2C_GetFlagStatus()
function.
- The returned value could be compared to events already defined in
this file or to custom values defined by user.
This function is suitable when multiple flags are monitored at the
same time.
- At the opposite of I2C_CheckEvent() function, this function allows
user to choose when an event is accepted (when all events flags are
set and no other flags are set or just when the needed flags are set
like I2C_CheckEvent() function.
- Limitations
- User may need to define his own events.
- Same remark concerning the error management is applicable for this
function if user decides to check only regular communication flags
(and ignores error flags).
3. Flag-based state monitoring (Using the function I2C_GetFlagStatus())
-----------------------------------------------------------------------
Using the function I2C_GetFlagStatus() which simply returns the status of
one single flag (ie. I2C_FLAG_RXNE ...).
- When to use
- This function could be used for specific applications or in debug
phase.
- It is suitable when only one flag checking is needed (most I2C
events are monitored through multiple flags).
- Limitations:
- When calling this function, the Status register is accessed.
Some flags are cleared when the status register is accessed.
So checking the status of one Flag, may clear other ones.
- Function may need to be called twice or more in order to monitor
one single event.
*/
/*
===============================================================================
1. Basic state monitoring
===============================================================================
*/
ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
/*
===============================================================================
2. Advanced state monitoring
===============================================================================
*/
uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
/*
===============================================================================
3. Flag-based state monitoring
===============================================================================
*/
FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_I2C_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

131
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_iwdg.h Normal file
View file

@ -0,0 +1,131 @@
/**
******************************************************************************
* @file stm32f4xx_iwdg.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_IWDG_H
#define __STM32F4xx_IWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup IWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup IWDG_Exported_Constants
* @{
*/
/** @defgroup IWDG_WriteAccess
* @{
*/
#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
((ACCESS) == IWDG_WriteAccess_Disable))
/**
* @}
*/
/** @defgroup IWDG_prescaler
* @{
*/
#define IWDG_Prescaler_4 ((uint8_t)0x00)
#define IWDG_Prescaler_8 ((uint8_t)0x01)
#define IWDG_Prescaler_16 ((uint8_t)0x02)
#define IWDG_Prescaler_32 ((uint8_t)0x03)
#define IWDG_Prescaler_64 ((uint8_t)0x04)
#define IWDG_Prescaler_128 ((uint8_t)0x05)
#define IWDG_Prescaler_256 ((uint8_t)0x06)
#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
((PRESCALER) == IWDG_Prescaler_8) || \
((PRESCALER) == IWDG_Prescaler_16) || \
((PRESCALER) == IWDG_Prescaler_32) || \
((PRESCALER) == IWDG_Prescaler_64) || \
((PRESCALER) == IWDG_Prescaler_128)|| \
((PRESCALER) == IWDG_Prescaler_256))
/**
* @}
*/
/** @defgroup IWDG_Flag
* @{
*/
#define IWDG_FLAG_PVU ((uint16_t)0x0001)
#define IWDG_FLAG_RVU ((uint16_t)0x0002)
#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Prescaler and Counter configuration functions ******************************/
void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
void IWDG_SetReload(uint16_t Reload);
void IWDG_ReloadCounter(void);
/* IWDG activation function ***************************************************/
void IWDG_Enable(void);
/* Flag management function ***************************************************/
FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_IWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

531
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_ltdc.h Normal file
View file

@ -0,0 +1,531 @@
/**
******************************************************************************
* @file stm32f4xx_ltdc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the LTDC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LTDC_H
#define __STM32F4xx_LTDC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup LTDC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief LTDC Init structure definition
*/
typedef struct
{
uint32_t LTDC_HSPolarity; /*!< configures the horizontal synchronization polarity.
This parameter can be one value of @ref LTDC_HSPolarity */
uint32_t LTDC_VSPolarity; /*!< configures the vertical synchronization polarity.
This parameter can be one value of @ref LTDC_VSPolarity */
uint32_t LTDC_DEPolarity; /*!< configures the data enable polarity. This parameter can
be one of value of @ref LTDC_DEPolarity */
uint32_t LTDC_PCPolarity; /*!< configures the pixel clock polarity. This parameter can
be one of value of @ref LTDC_PCPolarity */
uint32_t LTDC_HorizontalSync; /*!< configures the number of Horizontal synchronization
width. This parameter must range from 0x000 to 0xFFF. */
uint32_t LTDC_VerticalSync; /*!< configures the number of Vertical synchronization
height. This parameter must range from 0x000 to 0x7FF. */
uint32_t LTDC_AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
This parameter must range from LTDC_HorizontalSync to 0xFFF. */
uint32_t LTDC_AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
This parameter must range from LTDC_VerticalSync to 0x7FF. */
uint32_t LTDC_AccumulatedActiveW; /*!< configures the accumulated active width. This parameter
must range from LTDC_AccumulatedHBP to 0xFFF. */
uint32_t LTDC_AccumulatedActiveH; /*!< configures the accumulated active height. This parameter
must range from LTDC_AccumulatedVBP to 0x7FF. */
uint32_t LTDC_TotalWidth; /*!< configures the total width. This parameter
must range from LTDC_AccumulatedActiveW to 0xFFF. */
uint32_t LTDC_TotalHeigh; /*!< configures the total height. This parameter
must range from LTDC_AccumulatedActiveH to 0x7FF. */
uint32_t LTDC_BackgroundRedValue; /*!< configures the background red value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_BackgroundGreenValue; /*!< configures the background green value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_BackgroundBlueValue; /*!< configures the background blue value.
This parameter must range from 0x00 to 0xFF. */
} LTDC_InitTypeDef;
/**
* @brief LTDC Layer structure definition
*/
typedef struct
{
uint32_t LTDC_HorizontalStart; /*!< Configures the Window Horizontal Start Position.
This parameter must range from 0x000 to 0xFFF. */
uint32_t LTDC_HorizontalStop; /*!< Configures the Window Horizontal Stop Position.
This parameter must range from 0x0000 to 0xFFFF. */
uint32_t LTDC_VerticalStart; /*!< Configures the Window vertical Start Position.
This parameter must range from 0x000 to 0xFFF. */
uint32_t LTDC_VerticalStop; /*!< Configures the Window vaertical Stop Position.
This parameter must range from 0x0000 to 0xFFFF. */
uint32_t LTDC_PixelFormat; /*!< Specifies the pixel format. This parameter can be
one of value of @ref LTDC_Pixelformat */
uint32_t LTDC_ConstantAlpha; /*!< Specifies the constant alpha used for blending.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_DefaultColorBlue; /*!< Configures the default blue value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_DefaultColorGreen; /*!< Configures the default green value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_DefaultColorRed; /*!< Configures the default red value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_DefaultColorAlpha; /*!< Configures the default alpha value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_BlendingFactor_1; /*!< Select the blending factor 1. This parameter
can be one of value of @ref LTDC_BlendingFactor1 */
uint32_t LTDC_BlendingFactor_2; /*!< Select the blending factor 2. This parameter
can be one of value of @ref LTDC_BlendingFactor2 */
uint32_t LTDC_CFBStartAdress; /*!< Configures the color frame buffer address */
uint32_t LTDC_CFBLineLength; /*!< Configures the color frame buffer line length.
This parameter must range from 0x0000 to 0x1FFF. */
uint32_t LTDC_CFBPitch; /*!< Configures the color frame buffer pitch in bytes.
This parameter must range from 0x0000 to 0x1FFF. */
uint32_t LTDC_CFBLineNumber; /*!< Specifies the number of line in frame buffer.
This parameter must range from 0x000 to 0x7FF. */
} LTDC_Layer_InitTypeDef;
/**
* @brief LTDC Position structure definition
*/
typedef struct
{
uint32_t LTDC_POSX; /*!< Current X Position */
uint32_t LTDC_POSY; /*!< Current Y Position */
} LTDC_PosTypeDef;
typedef struct
{
uint32_t LTDC_BlueWidth; /*!< Blue width */
uint32_t LTDC_GreenWidth; /*!< Green width */
uint32_t LTDC_RedWidth; /*!< Red width */
} LTDC_RGBTypeDef;
typedef struct
{
uint32_t LTDC_ColorKeyBlue; /*!< Configures the color key blue value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_ColorKeyGreen; /*!< Configures the color key green value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_ColorKeyRed; /*!< Configures the color key red value.
This parameter must range from 0x00 to 0xFF. */
} LTDC_ColorKeying_InitTypeDef;
typedef struct
{
uint32_t LTDC_CLUTAdress; /*!< Configures the CLUT address.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_BlueValue; /*!< Configures the blue value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_GreenValue; /*!< Configures the green value.
This parameter must range from 0x00 to 0xFF. */
uint32_t LTDC_RedValue; /*!< Configures the red value.
This parameter must range from 0x00 to 0xFF. */
} LTDC_CLUT_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup LTDC_Exported_Constants
* @}
*/
/** @defgroup LTDC_SYNC
* @{
*/
#define LTDC_HorizontalSYNC ((uint32_t)0x00000FFF)
#define LTDC_VerticalSYNC ((uint32_t)0x000007FF)
#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HorizontalSYNC)
#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VerticalSYNC)
#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HorizontalSYNC)
#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VerticalSYNC)
#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HorizontalSYNC)
#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VerticalSYNC)
#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HorizontalSYNC)
#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VerticalSYNC)
/**
* @}
*/
/** @defgroup LTDC_HSPolarity
* @{
*/
#define LTDC_HSPolarity_AL ((uint32_t)0x00000000) /*!< Horizontal Synchronization is active low. */
#define LTDC_HSPolarity_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPolarity_AL) || \
((HSPOL) == LTDC_HSPolarity_AH))
/**
* @}
*/
/** @defgroup LTDC_VSPolarity
* @{
*/
#define LTDC_VSPolarity_AL ((uint32_t)0x00000000) /*!< Vertical Synchronization is active low. */
#define LTDC_VSPolarity_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPolarity_AL) || \
((VSPOL) == LTDC_VSPolarity_AH))
/**
* @}
*/
/** @defgroup LTDC_DEPolarity
* @{
*/
#define LTDC_DEPolarity_AL ((uint32_t)0x00000000) /*!< Data Enable, is active low. */
#define LTDC_DEPolarity_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_VSPolarity_AL) || \
((DEPOL) == LTDC_DEPolarity_AH))
/**
* @}
*/
/** @defgroup LTDC_PCPolarity
* @{
*/
#define LTDC_PCPolarity_IPC ((uint32_t)0x00000000) /*!< input pixel clock. */
#define LTDC_PCPolarity_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPolarity_IPC) || \
((PCPOL) == LTDC_PCPolarity_IIPC))
/**
* @}
*/
/** @defgroup LTDC_Reload
* @{
*/
#define LTDC_IMReload LTDC_SRCR_IMR /*!< Immediately Reload. */
#define LTDC_VBReload LTDC_SRCR_VBR /*!< Vertical Blanking Reload. */
#define IS_LTDC_RELOAD(RELOAD) (((RELOAD) == LTDC_IMReload) || \
((RELOAD) == LTDC_VBReload))
/**
* @}
*/
/** @defgroup LTDC_Back_Color
* @{
*/
#define LTDC_Back_Color ((uint32_t)0x000000FF)
#define IS_LTDC_BackBlueValue(BBLUE) ((BBLUE) <= LTDC_Back_Color)
#define IS_LTDC_BackGreenValue(BGREEN) ((BGREEN) <= LTDC_Back_Color)
#define IS_LTDC_BackRedValue(BRED) ((BRED) <= LTDC_Back_Color)
/**
* @}
*/
/** @defgroup LTDC_Position
* @{
*/
#define LTDC_POS_CY LTDC_CPSR_CYPOS
#define LTDC_POS_CX LTDC_CPSR_CXPOS
#define IS_LTDC_GET_POS(POS) (((POS) <= LTDC_POS_CY))
/**
* @}
*/
/** @defgroup LTDC_LIPosition
* @{
*/
#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FF)
/**
* @}
*/
/** @defgroup LTDC_CurrentStatus
* @{
*/
#define LTDC_CD_VDES LTDC_CDSR_VDES
#define LTDC_CD_HDES LTDC_CDSR_HDES
#define LTDC_CD_VSYNC LTDC_CDSR_VSYNCS
#define LTDC_CD_HSYNC LTDC_CDSR_HSYNCS
#define IS_LTDC_GET_CD(CD) (((CD) == LTDC_CD_VDES) || ((CD) == LTDC_CD_HDES) || \
((CD) == LTDC_CD_VSYNC) || ((CD) == LTDC_CD_HSYNC))
/**
* @}
*/
/** @defgroup LTDC_Interrupts
* @{
*/
#define LTDC_IT_LI LTDC_IER_LIE
#define LTDC_IT_FU LTDC_IER_FUIE
#define LTDC_IT_TERR LTDC_IER_TERRIE
#define LTDC_IT_RR LTDC_IER_RRIE
#define IS_LTDC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFF0) == 0x00) && ((IT) != 0x00))
/**
* @}
*/
/** @defgroup LTDC_Flag
* @{
*/
#define LTDC_FLAG_LI LTDC_ISR_LIF
#define LTDC_FLAG_FU LTDC_ISR_FUIF
#define LTDC_FLAG_TERR LTDC_ISR_TERRIF
#define LTDC_FLAG_RR LTDC_ISR_RRIF
#define IS_LTDC_FLAG(FLAG) (((FLAG) == LTDC_FLAG_LI) || ((FLAG) == LTDC_FLAG_FU) || \
((FLAG) == LTDC_FLAG_TERR) || ((FLAG) == LTDC_FLAG_RR))
/**
* @}
*/
/** @defgroup LTDC_Pixelformat
* @{
*/
#define LTDC_Pixelformat_ARGB8888 ((uint32_t)0x00000000)
#define LTDC_Pixelformat_RGB888 ((uint32_t)0x00000001)
#define LTDC_Pixelformat_RGB565 ((uint32_t)0x00000002)
#define LTDC_Pixelformat_ARGB1555 ((uint32_t)0x00000003)
#define LTDC_Pixelformat_ARGB4444 ((uint32_t)0x00000004)
#define LTDC_Pixelformat_L8 ((uint32_t)0x00000005)
#define LTDC_Pixelformat_AL44 ((uint32_t)0x00000006)
#define LTDC_Pixelformat_AL88 ((uint32_t)0x00000007)
#define IS_LTDC_Pixelformat(Pixelformat) (((Pixelformat) == LTDC_Pixelformat_ARGB8888) || ((Pixelformat) == LTDC_Pixelformat_RGB888) || \
((Pixelformat) == LTDC_Pixelformat_RGB565) || ((Pixelformat) == LTDC_Pixelformat_ARGB1555) || \
((Pixelformat) == LTDC_Pixelformat_ARGB4444) || ((Pixelformat) == LTDC_Pixelformat_L8) || \
((Pixelformat) == LTDC_Pixelformat_AL44) || ((Pixelformat) == LTDC_Pixelformat_AL88))
/**
* @}
*/
/** @defgroup LTDC_BlendingFactor1
* @{
*/
#define LTDC_BlendingFactor1_CA ((uint32_t)0x00000400)
#define LTDC_BlendingFactor1_PAxCA ((uint32_t)0x00000600)
#define IS_LTDC_BlendingFactor1(BlendingFactor1) (((BlendingFactor1) == LTDC_BlendingFactor1_CA) || ((BlendingFactor1) == LTDC_BlendingFactor1_PAxCA))
/**
* @}
*/
/** @defgroup LTDC_BlendingFactor2
* @{
*/
#define LTDC_BlendingFactor2_CA ((uint32_t)0x00000005)
#define LTDC_BlendingFactor2_PAxCA ((uint32_t)0x00000007)
#define IS_LTDC_BlendingFactor2(BlendingFactor2) (((BlendingFactor2) == LTDC_BlendingFactor2_CA) || ((BlendingFactor2) == LTDC_BlendingFactor2_PAxCA))
/**
* @}
*/
/** @defgroup LTDC_LAYER_Config
* @{
*/
#define LTDC_STOPPosition ((uint32_t)0x0000FFFF)
#define LTDC_STARTPosition ((uint32_t)0x00000FFF)
#define LTDC_DefaultColorConfig ((uint32_t)0x000000FF)
#define LTDC_ColorFrameBuffer ((uint32_t)0x00001FFF)
#define LTDC_LineNumber ((uint32_t)0x000007FF)
#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPosition)
#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPosition)
#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPosition)
#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPosition)
#define IS_LTDC_DEFAULTCOLOR(DEFAULTCOLOR) ((DEFAULTCOLOR) <= LTDC_DefaultColorConfig)
#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_ColorFrameBuffer)
#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_ColorFrameBuffer)
#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LineNumber)
/**
* @}
*/
/** @defgroup LTDC_colorkeying_Config
* @{
*/
#define LTDC_colorkeyingConfig ((uint32_t)0x000000FF)
#define IS_LTDC_CKEYING(CKEYING) ((CKEYING) <= LTDC_colorkeyingConfig)
/**
* @}
*/
/** @defgroup LTDC_CLUT_Config
* @{
*/
#define LTDC_CLUTWR ((uint32_t)0x000000FF)
#define IS_LTDC_CLUTWR(CLUTWR) ((CLUTWR) <= LTDC_CLUTWR)
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the LTDC configuration to the default reset state *****/
void LTDC_DeInit(void);
/* Initialization and Configuration functions *********************************/
void LTDC_Init(LTDC_InitTypeDef* LTDC_InitStruct);
void LTDC_StructInit(LTDC_InitTypeDef* LTDC_InitStruct);
void LTDC_Cmd(FunctionalState NewState);
void LTDC_DitherCmd(FunctionalState NewState);
LTDC_RGBTypeDef LTDC_GetRGBWidth(void);
void LTDC_RGBStructInit(LTDC_RGBTypeDef* LTDC_RGB_InitStruct);
void LTDC_LIPConfig(uint32_t LTDC_LIPositionConfig);
void LTDC_ReloadConfig(uint32_t LTDC_Reload);
void LTDC_LayerInit(LTDC_Layer_TypeDef* LTDC_Layerx, LTDC_Layer_InitTypeDef* LTDC_Layer_InitStruct);
void LTDC_LayerStructInit(LTDC_Layer_InitTypeDef * LTDC_Layer_InitStruct);
void LTDC_LayerCmd(LTDC_Layer_TypeDef* LTDC_Layerx, FunctionalState NewState);
LTDC_PosTypeDef LTDC_GetPosStatus(void);
void LTDC_PosStructInit(LTDC_PosTypeDef* LTDC_Pos_InitStruct);
FlagStatus LTDC_GetCDStatus(uint32_t LTDC_CD);
void LTDC_ColorKeyingConfig(LTDC_Layer_TypeDef* LTDC_Layerx, LTDC_ColorKeying_InitTypeDef* LTDC_colorkeying_InitStruct, FunctionalState NewState);
void LTDC_ColorKeyingStructInit(LTDC_ColorKeying_InitTypeDef* LTDC_colorkeying_InitStruct);
void LTDC_CLUTCmd(LTDC_Layer_TypeDef* LTDC_Layerx, FunctionalState NewState);
void LTDC_CLUTInit(LTDC_Layer_TypeDef* LTDC_Layerx, LTDC_CLUT_InitTypeDef* LTDC_CLUT_InitStruct);
void LTDC_CLUTStructInit(LTDC_CLUT_InitTypeDef* LTDC_CLUT_InitStruct);
void LTDC_LayerPosition(LTDC_Layer_TypeDef* LTDC_Layerx, uint16_t OffsetX, uint16_t OffsetY);
void LTDC_LayerAlpha(LTDC_Layer_TypeDef* LTDC_Layerx, uint8_t ConstantAlpha);
void LTDC_LayerAddress(LTDC_Layer_TypeDef* LTDC_Layerx, uint32_t Address);
void LTDC_LayerSize(LTDC_Layer_TypeDef* LTDC_Layerx, uint32_t Width, uint32_t Height);
void LTDC_LayerPixelFormat(LTDC_Layer_TypeDef* LTDC_Layerx, uint32_t PixelFormat);
/* Interrupts and flags management functions **********************************/
void LTDC_ITConfig(uint32_t LTDC_IT, FunctionalState NewState);
FlagStatus LTDC_GetFlagStatus(uint32_t LTDC_FLAG);
void LTDC_ClearFlag(uint32_t LTDC_FLAG);
ITStatus LTDC_GetITStatus(uint32_t LTDC_IT);
void LTDC_ClearITPendingBit(uint32_t LTDC_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_LTDC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

238
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_pwr.h Normal file
View file

@ -0,0 +1,238 @@
/**
******************************************************************************
* @file stm32f4xx_pwr.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_PWR_H
#define __STM32F4xx_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level
* @{
*/
#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2
#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3
#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4
#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5
#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6
#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \
((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \
((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \
((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7))
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode
* @{
*/
#define PWR_MainRegulator_ON ((uint32_t)0x00000000)
#define PWR_LowPowerRegulator_ON PWR_CR_LPDS
/* --- PWR_Legacy ---*/
#define PWR_Regulator_ON PWR_MainRegulator_ON
#define PWR_Regulator_LowPower PWR_LowPowerRegulator_ON
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MainRegulator_ON) || \
((REGULATOR) == PWR_LowPowerRegulator_ON))
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_UnderDrive_mode
* @{
*/
#define PWR_MainRegulator_UnderDrive_ON PWR_CR_MRUDS
#define PWR_LowPowerRegulator_UnderDrive_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MainRegulator_UnderDrive_ON) || \
((REGULATOR) == PWR_LowPowerRegulator_UnderDrive_ON))
/**
* @}
*/
#if defined(STM32F446xx)
/** @defgroup PWR_Wake_Up_Pin
* @{
*/
#define PWR_WakeUp_Pin1 ((uint32_t)0x00)
#define PWR_WakeUp_Pin2 ((uint32_t)0x01)
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUp_Pin1) || \
((PIN) == PWR_WakeUp_Pin2))
/**
* @}
*/
#endif /* STM32F446xx */
/** @defgroup PWR_STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_Regulator_Voltage_Scale
* @{
*/
#define PWR_Regulator_Voltage_Scale1 ((uint32_t)0x0000C000)
#define PWR_Regulator_Voltage_Scale2 ((uint32_t)0x00008000)
#define PWR_Regulator_Voltage_Scale3 ((uint32_t)0x00004000)
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || \
((VOLTAGE) == PWR_Regulator_Voltage_Scale2) || \
((VOLTAGE) == PWR_Regulator_Voltage_Scale3))
/**
* @}
*/
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
/* --- FLAG Legacy ---*/
#define PWR_FLAG_REGRDY PWR_FLAG_VOSRDY
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR) || \
((FLAG) == PWR_FLAG_VOSRDY) || ((FLAG) == PWR_FLAG_ODRDY) || \
((FLAG) == PWR_FLAG_ODSWRDY) || ((FLAG) == PWR_FLAG_UDRDY))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_UDRDY))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the PWR configuration to the default reset state ******/
void PWR_DeInit(void);
/* Backup Domain Access function **********************************************/
void PWR_BackupAccessCmd(FunctionalState NewState);
/* PVD configuration functions ************************************************/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
void PWR_PVDCmd(FunctionalState NewState);
/* WakeUp pins configuration functions ****************************************/
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
void PWR_WakeUpPinCmd(FunctionalState NewState);
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
#if defined(STM32F446xx)
void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPinx, FunctionalState NewState);
#endif /* STM32F446xx */
/* Main and Backup Regulators configuration functions *************************/
void PWR_BackupRegulatorCmd(FunctionalState NewState);
void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage);
void PWR_OverDriveCmd(FunctionalState NewState);
void PWR_OverDriveSWCmd(FunctionalState NewState);
void PWR_UnderDriveCmd(FunctionalState NewState);
#if defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F446xx)
void PWR_MainRegulatorUnderDriveCmd(FunctionalState NewState);
void PWR_LowRegulatorUnderDriveCmd(FunctionalState NewState);
#endif /* STM32F427_437xx || STM32F429_439xx || STM32F446xx */
#if defined(STM32F401xx) || defined(STM32F411xE)
void PWR_MainRegulatorLowVoltageCmd(FunctionalState NewState);
void PWR_LowRegulatorLowVoltageCmd(FunctionalState NewState);
#endif /* STM32F401xx || STM32F411xE */
/* FLASH Power Down configuration functions ***********************************/
void PWR_FlashPowerDownCmd(FunctionalState NewState);
/* Low Power modes configuration functions ************************************/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterUnderDriveSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
/* Flags management functions *************************************************/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
void PWR_ClearFlag(uint32_t PWR_FLAG);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_PWR_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

494
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_qspi.h Normal file
View file

@ -0,0 +1,494 @@
/**
******************************************************************************
* @file stm32f4xx_qspi.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the QSPI
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4XX_QUADSPI_H
#define __STM32F4XX_QUADSPI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup QSPI
* @{
*/
#if defined(STM32F446xx)
/* Exported types ------------------------------------------------------------*/
/**
* @brief QSPI Communication Configuration Init structure definition
*/
typedef struct
{
uint32_t QSPI_ComConfig_FMode; /* Specifies the Functional Mode
This parameter can be a value of @ref QSPI_ComConfig_Functional_Mode*/
uint32_t QSPI_ComConfig_DDRMode; /* Specifies the Double Data Rate Mode
This parameter can be a value of @ref QSPI_ComConfig_DoubleDataRateMode*/
uint32_t QSPI_ComConfig_DHHC; /* Specifies the Delay Half Hclk Cycle
This parameter can be a value of @ref QSPI_ComConfig_DelayHalfHclkCycle*/
uint32_t QSPI_ComConfig_SIOOMode; /* Specifies the Send Instruction Only Once Mode
This parameter can be a value of @ref QSPI_ComConfig_SendInstructionOnlyOnceMode*/
uint32_t QSPI_ComConfig_DMode; /* Specifies the Data Mode
This parameter can be a value of @ref QSPI_ComConfig_DataMode*/
uint32_t QSPI_ComConfig_DummyCycles; /* Specifies the Number of Dummy Cycles.
This parameter can be a number between 0x00 and 0x1F */
uint32_t QSPI_ComConfig_ABSize; /* Specifies the Alternate Bytes Size
This parameter can be a value of @ref QSPI_ComConfig_AlternateBytesSize*/
uint32_t QSPI_ComConfig_ABMode; /* Specifies the Alternate Bytes Mode
This parameter can be a value of @ref QSPI_ComConfig_AlternateBytesMode*/
uint32_t QSPI_ComConfig_ADSize; /* Specifies the Address Size
This parameter can be a value of @ref QSPI_ComConfig_AddressSize*/
uint32_t QSPI_ComConfig_ADMode; /* Specifies the Address Mode
This parameter can be a value of @ref QSPI_ComConfig_AddressMode*/
uint32_t QSPI_ComConfig_IMode; /* Specifies the Instruction Mode
This parameter can be a value of @ref QSPI_ComConfig_InstructionMode*/
uint32_t QSPI_ComConfig_Ins; /* Specifies the Instruction Mode
This parameter can be a value of @ref QSPI_ComConfig_Instruction*/
}QSPI_ComConfig_InitTypeDef;
/**
* @brief QSPI Init structure definition
*/
typedef struct
{
uint32_t QSPI_SShift; /* Specifies the Sample Shift
This parameter can be a value of @ref QSPI_Sample_Shift*/
uint32_t QSPI_Prescaler; /* Specifies the prescaler value used to divide the QSPI clock.
This parameter can be a number between 0x00 and 0xFF */
uint32_t QSPI_CKMode; /* Specifies the Clock Mode
This parameter can be a value of @ref QSPI_Clock_Mode*/
uint32_t QSPI_CSHTime; /* Specifies the Chip Select High Time
This parameter can be a value of @ref QSPI_ChipSelectHighTime*/
uint32_t QSPI_FSize; /* Specifies the Flash Size.
QSPI_FSize+1 is effectively the number of address bits required to address the flash memory.
The flash capacity can be up to 4GB (addressed using 32 bits) in indirect mode, but the
addressable space in memory-mapped mode is limited to 512MB
This parameter can be a number between 0x00 and 0x1F */
uint32_t QSPI_FSelect; /* Specifies the Flash which will be used,
This parameter can be a value of @ref QSPI_Fash_Select*/
uint32_t QSPI_DFlash; /* Specifies the Dual Flash Mode State
This parameter can be a value of @ref QSPI_Dual_Flash*/
}QSPI_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup QSPI_Exported_Constants
* @{
*/
/** @defgroup QSPI_Sample_Shift
* @{
*/
#define QSPI_SShift_NoShift ((uint32_t)0x00000000)
#define QSPI_SShift_HalfCycleShift ((uint32_t)QUADSPI_CR_SSHIFT_0)
#define QSPI_SShift_OneCycleShift ((uint32_t)QUADSPI_CR_SSHIFT_1)
#define QSPI_SShift_OneAndHalfCycleShift ((uint32_t)QUADSPI_CR_SSHIFT)
#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SShift_NoShift) || ((SSHIFT) == QSPI_SShift_HalfCycleShift) || \
((SSHIFT) == QSPI_SShift_OneCycleShift) || ((SSHIFT) == QSPI_SShift_OneAndHalfCycleShift))
/**
* @}
*/
/** @defgroup QSPI_Prescaler
* @{
*/
#define IS_QSPI_PRESCALER(PRESCALER) (((PRESCALER) <= 0xFF))
/**
* @}
*/
/** @defgroup QSPI_Clock_Mode
* @{
*/
#define QSPI_CKMode_Mode0 ((uint32_t)0x00000000)
#define QSPI_CKMode_Mode3 ((uint32_t)QUADSPI_DCR_CKMODE)
#define IS_QSPI_CKMODE(CKMode) (((CKMode) == QSPI_CKMode_Mode0) || ((CKMode) == QSPI_CKMode_Mode3))
/**
* @}
*/
/** @defgroup QSPI_ChipSelectHighTime
* @{
*/
#define QSPI_CSHTime_1Cycle ((uint32_t)0x00000000)
#define QSPI_CSHTime_2Cycle ((uint32_t)QUADSPI_DCR_CSHT_0)
#define QSPI_CSHTime_3Cycle ((uint32_t)QUADSPI_DCR_CSHT_1)
#define QSPI_CSHTime_4Cycle ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1)
#define QSPI_CSHTime_5Cycle ((uint32_t)QUADSPI_DCR_CSHT_2)
#define QSPI_CSHTime_6Cycle ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0)
#define QSPI_CSHTime_7Cycle ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1)
#define QSPI_CSHTime_8Cycle ((uint32_t)QUADSPI_DCR_CSHT)
#define IS_QSPI_CSHTIME(CSHTIME) (((CSHTIME) == QSPI_CSHTime_1Cycle) || \
((CSHTIME) == QSPI_CSHTime_2Cycle) || \
((CSHTIME) == QSPI_CSHTime_3Cycle) || \
((CSHTIME) == QSPI_CSHTime_4Cycle) || \
((CSHTIME) == QSPI_CSHTime_5Cycle) || \
((CSHTIME) == QSPI_CSHTime_6Cycle) || \
((CSHTIME) == QSPI_CSHTime_7Cycle) || \
((CSHTIME) == QSPI_CSHTime_8Cycle))
/**
* @}
*/
/** @defgroup QSPI_Flash_Size
* @{
*/
#define IS_QSPI_FSIZE(FSIZE) (((FSIZE) <= 0x1F))
/**
* @}
*/
/** @defgroup QSPI_Fash_Select
* @{
*/
#define QSPI_FSelect_1 ((uint32_t)0x00000000)
#define QSPI_FSelect_2 ((uint32_t)QUADSPI_CR_FSEL)
#define IS_QSPI_FSEL(FLA) (((FLA) == QSPI_FSelect_1) || ((FLA) == QSPI_FSelect_2))
/**
* @}
*/
/** @defgroup QSPI_Dual_Flash
* @{
*/
#define QSPI_DFlash_Disable ((uint32_t)0x00000000)
#define QSPI_DFlash_Enable ((uint32_t)QUADSPI_CR_DFM)
#define IS_QSPI_DFM(FLA) (((FLA) == QSPI_DFlash_Enable) || ((FLA) == QSPI_DFlash_Disable))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_Functional_Mode
* @{
*/
#define QSPI_ComConfig_FMode_Indirect_Write ((uint32_t)0x00000000)
#define QSPI_ComConfig_FMode_Indirect_Read ((uint32_t)QUADSPI_CCR_FMODE_0)
#define QSPI_ComConfig_FMode_Auto_Polling ((uint32_t)QUADSPI_CCR_FMODE_1)
#define QSPI_ComConfig_FMode_Memory_Mapped ((uint32_t)QUADSPI_CCR_FMODE)
#define IS_QSPI_FMODE(FMODE) (((FMODE) == QSPI_ComConfig_FMode_Indirect_Write) || \
((FMODE) == QSPI_ComConfig_FMode_Indirect_Read) || \
((FMODE) == QSPI_ComConfig_FMode_Auto_Polling) || \
((FMODE) == QSPI_ComConfig_FMode_Memory_Mapped))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_DoubleDataRateMode
* @{
*/
#define QSPI_ComConfig_DDRMode_Disable ((uint32_t)0x00000000)
#define QSPI_ComConfig_DDRMode_Enable ((uint32_t)QUADSPI_CCR_DDRM)
#define IS_QSPI_DDRMODE(DDRMODE) (((DDRMODE) == QSPI_ComConfig_DDRMode_Disable) || \
((DDRMODE) == QSPI_ComConfig_DDRMode_Enable))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_DelayHalfHclkCycle
* @{
*/
#define QSPI_ComConfig_DHHC_Disable ((uint32_t)0x00000000)
#define QSPI_ComConfig_DHHC_Enable ((uint32_t)QUADSPI_CCR_DHHC)
#define IS_QSPI_DHHC(DHHC) (((DHHC) == QSPI_ComConfig_DHHC_Disable) || \
((DHHC) == QSPI_ComConfig_DHHC_Enable))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_SendInstructionOnlyOnceMode
* @{
*/
#define QSPI_ComConfig_SIOOMode_Disable ((uint32_t)0x00000000)
#define QSPI_ComConfig_SIOOMode_Enable ((uint32_t)QUADSPI_CCR_SIOO)
#define IS_QSPI_SIOOMODE(SIOOMODE) (((SIOOMODE) == QSPI_ComConfig_SIOOMode_Disable) || \
((SIOOMODE) == QSPI_ComConfig_SIOOMode_Enable))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_DataMode
* @{
*/
#define QSPI_ComConfig_DMode_NoData ((uint32_t)0x00000000)
#define QSPI_ComConfig_DMode_1Line ((uint32_t)QUADSPI_CCR_DMODE_0)
#define QSPI_ComConfig_DMode_2Line ((uint32_t)QUADSPI_CCR_DMODE_1)
#define QSPI_ComConfig_DMode_4Line ((uint32_t)QUADSPI_CCR_DMODE)
#define IS_QSPI_DMODE(DMODE) (((DMODE) == QSPI_ComConfig_DMode_NoData) || \
((DMODE) == QSPI_ComConfig_DMode_1Line) || \
((DMODE) == QSPI_ComConfig_DMode_2Line) || \
((DMODE) == QSPI_ComConfig_DMode_4Line))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_AlternateBytesSize
* @{
*/
#define QSPI_ComConfig_ABSize_8bit ((uint32_t)0x00000000)
#define QSPI_ComConfig_ABSize_16bit ((uint32_t)QUADSPI_CCR_ABSIZE_0)
#define QSPI_ComConfig_ABSize_24bit ((uint32_t)QUADSPI_CCR_ABSIZE_1)
#define QSPI_ComConfig_ABSize_32bit ((uint32_t)QUADSPI_CCR_ABSIZE)
#define IS_QSPI_ABSIZE(ABSIZE) (((ABSIZE) == QSPI_ComConfig_ABSize_8bit) || \
((ABSIZE) == QSPI_ComConfig_ABSize_16bit) || \
((ABSIZE) == QSPI_ComConfig_ABSize_24bit) || \
((ABSIZE) == QSPI_ComConfig_ABSize_32bit))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_AlternateBytesMode
* @{
*/
#define QSPI_ComConfig_ABMode_NoAlternateByte ((uint32_t)0x00000000)
#define QSPI_ComConfig_ABMode_1Line ((uint32_t)QUADSPI_CCR_ABMODE_0)
#define QSPI_ComConfig_ABMode_2Line ((uint32_t)QUADSPI_CCR_ABMODE_1)
#define QSPI_ComConfig_ABMode_4Line ((uint32_t)QUADSPI_CCR_ABMODE)
#define IS_QSPI_ABMODE(ABMODE) (((ABMODE) == QSPI_ComConfig_ABMode_NoAlternateByte) || \
((ABMODE) == QSPI_ComConfig_ABMode_1Line) || \
((ABMODE) == QSPI_ComConfig_ABMode_2Line) || \
((ABMODE) == QSPI_ComConfig_ABMode_4Line))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_AddressSize
* @{
*/
#define QSPI_ComConfig_ADSize_8bit ((uint32_t)0x00000000)
#define QSPI_ComConfig_ADSize_16bit ((uint32_t)QUADSPI_CCR_ADSIZE_0)
#define QSPI_ComConfig_ADSize_24bit ((uint32_t)QUADSPI_CCR_ADSIZE_1)
#define QSPI_ComConfig_ADSize_32bit ((uint32_t)QUADSPI_CCR_ADSIZE)
#define IS_QSPI_ADSIZE(ADSIZE) (((ADSIZE) == QSPI_ComConfig_ADSize_8bit) || \
((ADSIZE) == QSPI_ComConfig_ADSize_16bit) || \
((ADSIZE) == QSPI_ComConfig_ADSize_24bit) || \
((ADSIZE) == QSPI_ComConfig_ADSize_32bit))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_AddressMode
* @{
*/
#define QSPI_ComConfig_ADMode_NoAddress ((uint32_t)0x00000000)
#define QSPI_ComConfig_ADMode_1Line ((uint32_t)QUADSPI_CCR_ADMODE_0)
#define QSPI_ComConfig_ADMode_2Line ((uint32_t)QUADSPI_CCR_ADMODE_1)
#define QSPI_ComConfig_ADMode_4Line ((uint32_t)QUADSPI_CCR_ADMODE)
#define IS_QSPI_ADMODE(ADMODE) (((ADMODE) == QSPI_ComConfig_ADMode_NoAddress) || \
((ADMODE) == QSPI_ComConfig_ADMode_1Line) || \
((ADMODE) == QSPI_ComConfig_ADMode_2Line) || \
((ADMODE) == QSPI_ComConfig_ADMode_4Line))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_InstructionMode
* @{
*/
#define QSPI_ComConfig_IMode_NoInstruction ((uint32_t)0x00000000)
#define QSPI_ComConfig_IMode_1Line ((uint32_t)QUADSPI_CCR_IMODE_0)
#define QSPI_ComConfig_IMode_2Line ((uint32_t)QUADSPI_CCR_IMODE_1)
#define QSPI_ComConfig_IMode_4Line ((uint32_t)QUADSPI_CCR_IMODE)
#define IS_QSPI_IMODE(IMODE) (((IMODE) == QSPI_ComConfig_IMode_NoInstruction) || \
((IMODE) == QSPI_ComConfig_IMode_1Line) || \
((IMODE) == QSPI_ComConfig_IMode_2Line) || \
((IMODE) == QSPI_ComConfig_IMode_4Line))
/**
* @}
*/
/** @defgroup QSPI_ComConfig_Instruction
* @{
*/
#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFF)
/**
* @}
*/
/** @defgroup QSPI_InterruptsDefinition
* @{
*/
#define QSPI_IT_TO (uint32_t)(QUADSPI_CR_TOIE | QUADSPI_SR_TOF)
#define QSPI_IT_SM (uint32_t)(QUADSPI_CR_SMIE | QUADSPI_SR_SMF)
#define QSPI_IT_FT (uint32_t)(QUADSPI_CR_FTIE | QUADSPI_SR_FTF)
#define QSPI_IT_TC (uint32_t)(QUADSPI_CR_TCIE | QUADSPI_SR_TCF)
#define QSPI_IT_TE (uint32_t)(QUADSPI_CR_TEIE | QUADSPI_SR_TEF)
#define IS_QSPI_IT(IT) ((((IT) & 0xFFE0FFE0) == 0) && ((IT) != 0))
#define IS_QSPI_CLEAR_IT(IT) ((((IT) & 0xFFE4FFE4) == 0) && ((IT) != 0))
/**
* @}
*/
/** @defgroup QSPI_FlagsDefinition
* @{
*/
#define QSPI_FLAG_TO QUADSPI_SR_TOF
#define QSPI_FLAG_SM QUADSPI_SR_SMF
#define QSPI_FLAG_FT QUADSPI_SR_FTF
#define QSPI_FLAG_TC QUADSPI_SR_TCF
#define QSPI_FLAG_TE QUADSPI_SR_TEF
#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY
#define IS_QSPI_GET_FLAG(FLAG) (((FLAG) == QSPI_FLAG_TO) || ((FLAG) == QSPI_FLAG_SM) || \
((FLAG) == QSPI_FLAG_FT) || ((FLAG) == QSPI_FLAG_TC) || \
((FLAG) == QSPI_FLAG_TE) || ((FLAG) == QSPI_FLAG_BUSY))
#define IS_QSPI_CLEAR_FLAG(FLAG) (((FLAG) == QSPI_FLAG_TO) || ((FLAG) == QSPI_FLAG_SM) || \
((FLAG) == QSPI_FLAG_TC) || ((FLAG) == QSPI_FLAG_TE))
/**
* @}
*/
/** @defgroup QSPI_Polling_Match_Mode
* @{
*/
#define QSPI_PMM_AND ((uint32_t)0x00000000)
#define QSPI_PMM_OR ((uint32_t)QUADSPI_CR_PMM)
#define IS_QSPI_PMM(PMM) (((PMM) == QSPI_PMM_AND) || ((PMM) == QSPI_PMM_OR))
/**
* @}
*/
/** @defgroup QSPI_Polling_Interval
* @{
*/
#define IS_QSPI_PIR(PIR) ((PIR) <= QUADSPI_PIR_INTERVAL)
/**
* @}
*/
/** @defgroup QSPI_Timeout
* @{
*/
#define IS_QSPI_TIMEOUT(TIMEOUT) ((TIMEOUT) <= QUADSPI_LPTR_TIMEOUT)
/**
* @}
*/
/** @defgroup QSPI_DummyCycle
* @{
*/
#define IS_QSPI_DCY(DCY) ((DCY) <= 0x1F)
/**
* @}
*/
/** @defgroup QSPI_FIFOThreshold
* @{
*/
#define IS_QSPI_FIFOTHRESHOLD(FIFOTHRESHOLD) ((FIFOTHRESHOLD) <= 0x0F)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Initialization and Configuration functions *********************************/
void QSPI_DeInit(void);
void QSPI_Init(QSPI_InitTypeDef* QSPI_InitStruct);
void QSPI_StructInit(QSPI_InitTypeDef* QSPI_InitStruct);
void QSPI_ComConfig_Init(QSPI_ComConfig_InitTypeDef* QSPI_ComConfig_InitStruct);
void QSPI_ComConfig_StructInit(QSPI_ComConfig_InitTypeDef* QSPI_ComConfig_InitStruct);
void QSPI_Cmd(FunctionalState NewState);
void QSPI_AutoPollingMode_Config(uint32_t QSPI_Match, uint32_t QSPI_Mask , uint32_t QSPI_Match_Mode);
void QSPI_AutoPollingMode_SetInterval(uint32_t QSPI_Interval);
void QSPI_MemoryMappedMode_SetTimeout(uint32_t QSPI_Timeout);
void QSPI_SetAddress(uint32_t QSPI_Address);
void QSPI_SetAlternateByte(uint32_t QSPI_AlternateByte);
void QSPI_SetFIFOThreshold(uint32_t QSPI_FIFOThreshold);
void QSPI_SetDataLength(uint32_t QSPI_DataLength);
void QSPI_TimeoutCounterCmd(FunctionalState NewState);
void QSPI_AutoPollingModeStopCmd(FunctionalState NewState);
void QSPI_AbortRequest(void);
void QSPI_DualFlashMode_Cmd(FunctionalState NewState);
/* Data transfers functions ***************************************************/
void QSPI_SendData8(uint8_t Data);
void QSPI_SendData16(uint16_t Data);
void QSPI_SendData32(uint32_t Data);
uint8_t QSPI_ReceiveData8(void);
uint16_t QSPI_ReceiveData16(void);
uint32_t QSPI_ReceiveData32(void);
/* DMA transfers management functions *****************************************/
void QSPI_DMACmd(FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void QSPI_ITConfig(uint32_t QSPI_IT, FunctionalState NewState);
uint32_t QSPI_GetFIFOLevel(void);
FlagStatus QSPI_GetFlagStatus(uint32_t QSPI_FLAG);
void QSPI_ClearFlag(uint32_t QSPI_FLAG);
ITStatus QSPI_GetITStatus(uint32_t QSPI_IT);
void QSPI_ClearITPendingBit(uint32_t QSPI_IT);
uint32_t QSPI_GetFMode(void);
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4XX_QUADSPI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

852
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rcc.h Normal file
View file

@ -0,0 +1,852 @@
/**
******************************************************************************
* @file stm32f4xx_rcc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the RCC firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_RCC_H
#define __STM32F4xx_RCC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup RCC
* @{
*/
/* Exported types ------------------------------------------------------------*/
typedef struct
{
uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency expressed in Hz */
uint32_t HCLK_Frequency; /*!< HCLK clock frequency expressed in Hz */
uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency expressed in Hz */
uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency expressed in Hz */
}RCC_ClocksTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_Exported_Constants
* @{
*/
/** @defgroup RCC_HSE_configuration
* @{
*/
#define RCC_HSE_OFF ((uint8_t)0x00)
#define RCC_HSE_ON ((uint8_t)0x01)
#define RCC_HSE_Bypass ((uint8_t)0x05)
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
((HSE) == RCC_HSE_Bypass))
/**
* @}
*/
/** @defgroup RCC_LSE_Dual_Mode_Selection
* @{
*/
#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00)
#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01)
#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) || \
((MODE) == RCC_LSE_HIGHDRIVE_MODE))
/**
* @}
*/
/** @defgroup RCC_PLLSAIDivR_Factor
* @{
*/
#define RCC_PLLSAIDivR_Div2 ((uint32_t)0x00000000)
#define RCC_PLLSAIDivR_Div4 ((uint32_t)0x00010000)
#define RCC_PLLSAIDivR_Div8 ((uint32_t)0x00020000)
#define RCC_PLLSAIDivR_Div16 ((uint32_t)0x00030000)
#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDivR_Div2) ||\
((VALUE) == RCC_PLLSAIDivR_Div4) ||\
((VALUE) == RCC_PLLSAIDivR_Div8) ||\
((VALUE) == RCC_PLLSAIDivR_Div16))
/**
* @}
*/
/** @defgroup RCC_PLL_Clock_Source
* @{
*/
#define RCC_PLLSource_HSI ((uint32_t)0x00000000)
#define RCC_PLLSource_HSE ((uint32_t)0x00400000)
#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI) || \
((SOURCE) == RCC_PLLSource_HSE))
#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
#if defined(STM32F446xx)
#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
#endif /* STM32F446xx */
#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63)
#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
#if defined(STM32F446xx)
#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63)
#endif /* STM32F446xx */
#define IS_RCC_PLLSAIN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432))
#if defined(STM32F446xx)
#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
#endif /* STM32F446xx */
#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
/**
* @}
*/
/** @defgroup RCC_System_Clock_Source
* @{
*/
#if defined(STM32F446xx)
#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
#define RCC_SYSCLKSource_PLLPCLK ((uint32_t)0x00000002)
#define RCC_SYSCLKSource_PLLRCLK ((uint32_t)0x00000003)
#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
((SOURCE) == RCC_SYSCLKSource_HSE) || \
((SOURCE) == RCC_SYSCLKSource_PLLPCLK) || \
((SOURCE) == RCC_SYSCLKSource_PLLRCLK))
/* Add legacy definition */
#define RCC_SYSCLKSource_PLLCLK RCC_SYSCLKSource_PLLPCLK
#endif /* STM32F446xx */
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002)
#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
((SOURCE) == RCC_SYSCLKSource_HSE) || \
((SOURCE) == RCC_SYSCLKSource_PLLCLK))
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
/**
* @}
*/
/** @defgroup RCC_AHB_Clock_Source
* @{
*/
#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000)
#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080)
#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090)
#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0)
#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0)
#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0)
#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0)
#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0)
#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0)
#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
((HCLK) == RCC_SYSCLK_Div512))
/**
* @}
*/
/** @defgroup RCC_APB1_APB2_Clock_Source
* @{
*/
#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
#define RCC_HCLK_Div2 ((uint32_t)0x00001000)
#define RCC_HCLK_Div4 ((uint32_t)0x00001400)
#define RCC_HCLK_Div8 ((uint32_t)0x00001800)
#define RCC_HCLK_Div16 ((uint32_t)0x00001C00)
#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
((PCLK) == RCC_HCLK_Div16))
/**
* @}
*/
/** @defgroup RCC_Interrupt_Source
* @{
*/
#define RCC_IT_LSIRDY ((uint8_t)0x01)
#define RCC_IT_LSERDY ((uint8_t)0x02)
#define RCC_IT_HSIRDY ((uint8_t)0x04)
#define RCC_IT_HSERDY ((uint8_t)0x08)
#define RCC_IT_PLLRDY ((uint8_t)0x10)
#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
#define RCC_IT_PLLSAIRDY ((uint8_t)0x40)
#define RCC_IT_CSS ((uint8_t)0x80)
#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
((IT) == RCC_IT_PLLSAIRDY) || ((IT) == RCC_IT_PLLI2SRDY))
#define IS_RCC_CLEAR_IT(IT)((IT) != 0x00)
/**
* @}
*/
/** @defgroup RCC_LSE_Configuration
* @{
*/
#define RCC_LSE_OFF ((uint8_t)0x00)
#define RCC_LSE_ON ((uint8_t)0x01)
#define RCC_LSE_Bypass ((uint8_t)0x04)
#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
((LSE) == RCC_LSE_Bypass))
/**
* @}
*/
/** @defgroup RCC_RTC_Clock_Source
* @{
*/
#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100)
#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200)
#define RCC_RTCCLKSource_HSE_Div2 ((uint32_t)0x00020300)
#define RCC_RTCCLKSource_HSE_Div3 ((uint32_t)0x00030300)
#define RCC_RTCCLKSource_HSE_Div4 ((uint32_t)0x00040300)
#define RCC_RTCCLKSource_HSE_Div5 ((uint32_t)0x00050300)
#define RCC_RTCCLKSource_HSE_Div6 ((uint32_t)0x00060300)
#define RCC_RTCCLKSource_HSE_Div7 ((uint32_t)0x00070300)
#define RCC_RTCCLKSource_HSE_Div8 ((uint32_t)0x00080300)
#define RCC_RTCCLKSource_HSE_Div9 ((uint32_t)0x00090300)
#define RCC_RTCCLKSource_HSE_Div10 ((uint32_t)0x000A0300)
#define RCC_RTCCLKSource_HSE_Div11 ((uint32_t)0x000B0300)
#define RCC_RTCCLKSource_HSE_Div12 ((uint32_t)0x000C0300)
#define RCC_RTCCLKSource_HSE_Div13 ((uint32_t)0x000D0300)
#define RCC_RTCCLKSource_HSE_Div14 ((uint32_t)0x000E0300)
#define RCC_RTCCLKSource_HSE_Div15 ((uint32_t)0x000F0300)
#define RCC_RTCCLKSource_HSE_Div16 ((uint32_t)0x00100300)
#define RCC_RTCCLKSource_HSE_Div17 ((uint32_t)0x00110300)
#define RCC_RTCCLKSource_HSE_Div18 ((uint32_t)0x00120300)
#define RCC_RTCCLKSource_HSE_Div19 ((uint32_t)0x00130300)
#define RCC_RTCCLKSource_HSE_Div20 ((uint32_t)0x00140300)
#define RCC_RTCCLKSource_HSE_Div21 ((uint32_t)0x00150300)
#define RCC_RTCCLKSource_HSE_Div22 ((uint32_t)0x00160300)
#define RCC_RTCCLKSource_HSE_Div23 ((uint32_t)0x00170300)
#define RCC_RTCCLKSource_HSE_Div24 ((uint32_t)0x00180300)
#define RCC_RTCCLKSource_HSE_Div25 ((uint32_t)0x00190300)
#define RCC_RTCCLKSource_HSE_Div26 ((uint32_t)0x001A0300)
#define RCC_RTCCLKSource_HSE_Div27 ((uint32_t)0x001B0300)
#define RCC_RTCCLKSource_HSE_Div28 ((uint32_t)0x001C0300)
#define RCC_RTCCLKSource_HSE_Div29 ((uint32_t)0x001D0300)
#define RCC_RTCCLKSource_HSE_Div30 ((uint32_t)0x001E0300)
#define RCC_RTCCLKSource_HSE_Div31 ((uint32_t)0x001F0300)
#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
((SOURCE) == RCC_RTCCLKSource_LSI) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div2) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div3) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div4) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div5) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div6) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div7) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div8) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div9) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div10) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div11) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div12) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div13) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div14) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div15) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div16) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div17) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div18) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div19) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div20) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div21) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div22) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div23) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div24) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div25) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div26) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div27) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div28) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div29) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div30) || \
((SOURCE) == RCC_RTCCLKSource_HSE_Div31))
/**
* @}
*/
#if defined(STM32F446xx)
/** @defgroup RCC_I2S_Clock_Source
* @{
*/
#define RCC_I2SCLKSource_PLLI2S ((uint32_t)0x00)
#define RCC_I2SCLKSource_Ext ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
#define RCC_I2SCLKSource_PLL ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
#define RCC_I2SCLKSource_HSI_HSE ((uint32_t)RCC_DCKCFGR_I2S1SRC_0 | RCC_DCKCFGR_I2S1SRC_1)
#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSource_PLLI2S) || ((SOURCE) == RCC_I2SCLKSource_Ext) || \
((SOURCE) == RCC_I2SCLKSource_PLL) || ((SOURCE) == RCC_I2SCLKSource_HSI_HSE))
/**
* @}
*/
/** @defgroup RCC_I2S_APBBus
* @{
*/
#define RCC_I2SBus_APB1 ((uint8_t)0x00)
#define RCC_I2SBus_APB2 ((uint8_t)0x01)
#define IS_RCC_I2S_APBx(BUS) (((BUS) == RCC_I2SBus_APB1) || ((BUS) == RCC_I2SBus_APB2))
/**
* @}
*/
/** @defgroup RCC_SAI_Clock_Source
* @{
*/
#define RCC_SAICLKSource_PLLSAI ((uint32_t)0x00)
#define RCC_SAICLKSource_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
#define RCC_SAICLKSource_PLL ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
#define RCC_SAICLKSource_HSI_HSE ((uint32_t)RCC_DCKCFGR_SAI1SRC_0 | RCC_DCKCFGR_SAI1SRC_1)
#define IS_RCC_SAICLK_SOURCE(SOURCE) (((SOURCE) == RCC_SAICLKSource_PLLSAI) || ((SOURCE) == RCC_SAICLKSource_PLLI2S) || \
((SOURCE) == RCC_SAICLKSource_PLL) || ((SOURCE) == RCC_SAICLKSource_HSI_HSE))
/**
* @}
*/
/** @defgroup RCC_SAI_Instance
* @{
*/
#define RCC_SAIInstance_SAI1 ((uint8_t)0x00)
#define RCC_SAIInstance_SAI2 ((uint8_t)0x01)
#define IS_RCC_SAI_INSTANCE(BUS) (((BUS) == RCC_SAIInstance_SAI1) || ((BUS) == RCC_SAIInstance_SAI2))
/**
* @}
*/
#endif /* STM32F446xx */
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
/** @defgroup RCC_I2S_Clock_Source
* @{
*/
#define RCC_I2S2CLKSource_PLLI2S ((uint8_t)0x00)
#define RCC_I2S2CLKSource_Ext ((uint8_t)0x01)
#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_PLLI2S) || ((SOURCE) == RCC_I2S2CLKSource_Ext))
/**
* @}
*/
/** @defgroup RCC_SAI_BlockA_Clock_Source
* @{
*/
#define RCC_SAIACLKSource_PLLSAI ((uint32_t)0x00000000)
#define RCC_SAIACLKSource_PLLI2S ((uint32_t)0x00100000)
#define RCC_SAIACLKSource_Ext ((uint32_t)0x00200000)
#define IS_RCC_SAIACLK_SOURCE(SOURCE) (((SOURCE) == RCC_SAIACLKSource_PLLI2S) ||\
((SOURCE) == RCC_SAIACLKSource_PLLSAI) ||\
((SOURCE) == RCC_SAIACLKSource_Ext))
/**
* @}
*/
/** @defgroup RCC_SAI_BlockB_Clock_Source
* @{
*/
#define RCC_SAIBCLKSource_PLLSAI ((uint32_t)0x00000000)
#define RCC_SAIBCLKSource_PLLI2S ((uint32_t)0x00400000)
#define RCC_SAIBCLKSource_Ext ((uint32_t)0x00800000)
#define IS_RCC_SAIBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SAIBCLKSource_PLLI2S) ||\
((SOURCE) == RCC_SAIBCLKSource_PLLSAI) ||\
((SOURCE) == RCC_SAIBCLKSource_Ext))
/**
* @}
*/
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
/** @defgroup RCC_TIM_PRescaler_Selection
* @{
*/
#define RCC_TIMPrescDesactivated ((uint8_t)0x00)
#define RCC_TIMPrescActivated ((uint8_t)0x01)
#define IS_RCC_TIMCLK_PRESCALER(VALUE) (((VALUE) == RCC_TIMPrescDesactivated) || ((VALUE) == RCC_TIMPrescActivated))
/**
* @}
*/
#if defined(STM32F446xx)
/** @defgroup RCC_SDIO_Clock_Source_Selection
* @{
*/
#define RCC_SDIOCLKSource_48MHZ ((uint8_t)0x00)
#define RCC_SDIOCLKSource_SYSCLK ((uint8_t)0x01)
#define IS_RCC_SDIO_CLOCKSOURCE(CLKSOURCE) (((CLKSOURCE) == RCC_SDIOCLKSource_48MHZ) || \
((CLKSOURCE) == RCC_SDIOCLKSource_SYSCLK))
/**
* @}
*/
/** @defgroup RCC_48MHZ_Clock_Source_Selection
* @{
*/
#define RCC_48MHZCLKSource_PLL ((uint8_t)0x00)
#define RCC_48MHZCLKSource_PLLSAI ((uint8_t)0x01)
#define IS_RCC_48MHZ_CLOCKSOURCE(CLKSOURCE) (((CLKSOURCE) == RCC_48MHZCLKSource_PLL) || \
((CLKSOURCE) == RCC_48MHZCLKSource_PLLSAI))
/**
* @}
*/
#endif /* STM32F446xx */
#if defined(STM32F446xx)
/** @defgroup RCC_SPDIFRX_Clock_Source_Selection
* @{
*/
#define RCC_SPDIFRXCLKSource_PLLR ((uint8_t)0x00)
#define RCC_SPDIFRXCLKSource_PLLI2SP ((uint8_t)0x01)
#define IS_RCC_SPDIFRX_CLOCKSOURCE(CLKSOURCE) (((CLKSOURCE) == RCC_SPDIFRXCLKSource_PLLR) || \
((CLKSOURCE) == RCC_SPDIFRXCLKSource_PLLI2SP))
/**
* @}
*/
/** @defgroup RCC_CEC_Clock_Source_Selection
* @{
*/
#define RCC_CECCLKSource_HSIDiv488 ((uint8_t)0x00)
#define RCC_CECCLKSource_LSE ((uint8_t)0x01)
#define IS_RCC_CEC_CLOCKSOURCE(CLKSOURCE) (((CLKSOURCE) == RCC_CECCLKSource_HSIDiv488) || \
((CLKSOURCE) == RCC_CECCLKSource_LSE))
/**
* @}
*/
/** @defgroup RCC_FMPI2C1_Clock_Source
* @{
*/
#define RCC_FMPI2C1CLKSource_APB1 ((uint32_t)0x00)
#define RCC_FMPI2C1CLKSource_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
#define RCC_FMPI2C1CLKSource_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
#define IS_RCC_FMPI2C1_CLOCKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSource_APB1) || ((SOURCE) == RCC_FMPI2C1CLKSource_SYSCLK) || \
((SOURCE) == RCC_FMPI2C1CLKSource_HSI))
/**
* @}
*/
/** @defgroup RCC_AHB1_ClockGating
* @{
*/
#define RCC_AHB1ClockGating_APB1Bridge ((uint32_t)0x00000001)
#define RCC_AHB1ClockGating_APB2Bridge ((uint32_t)0x00000002)
#define RCC_AHB1ClockGating_CM4DBG ((uint32_t)0x00000004)
#define RCC_AHB1ClockGating_SPARE ((uint32_t)0x00000008)
#define RCC_AHB1ClockGating_SRAM ((uint32_t)0x00000010)
#define RCC_AHB1ClockGating_FLITF ((uint32_t)0x00000020)
#define RCC_AHB1ClockGating_RCC ((uint32_t)0x00000040)
#define IS_RCC_AHB1_CLOCKGATING(PERIPH) ((((PERIPH) & 0xFFFFFF80) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
#endif /* STM32F446xx */
/** @defgroup RCC_AHB1_Peripherals
* @{
*/
#define RCC_AHB1Periph_GPIOA ((uint32_t)0x00000001)
#define RCC_AHB1Periph_GPIOB ((uint32_t)0x00000002)
#define RCC_AHB1Periph_GPIOC ((uint32_t)0x00000004)
#define RCC_AHB1Periph_GPIOD ((uint32_t)0x00000008)
#define RCC_AHB1Periph_GPIOE ((uint32_t)0x00000010)
#define RCC_AHB1Periph_GPIOF ((uint32_t)0x00000020)
#define RCC_AHB1Periph_GPIOG ((uint32_t)0x00000040)
#define RCC_AHB1Periph_GPIOH ((uint32_t)0x00000080)
#define RCC_AHB1Periph_GPIOI ((uint32_t)0x00000100)
#define RCC_AHB1Periph_GPIOJ ((uint32_t)0x00000200)
#define RCC_AHB1Periph_GPIOK ((uint32_t)0x00000400)
#define RCC_AHB1Periph_CRC ((uint32_t)0x00001000)
#define RCC_AHB1Periph_FLITF ((uint32_t)0x00008000)
#define RCC_AHB1Periph_SRAM1 ((uint32_t)0x00010000)
#define RCC_AHB1Periph_SRAM2 ((uint32_t)0x00020000)
#define RCC_AHB1Periph_BKPSRAM ((uint32_t)0x00040000)
#define RCC_AHB1Periph_SRAM3 ((uint32_t)0x00080000)
#define RCC_AHB1Periph_CCMDATARAMEN ((uint32_t)0x00100000)
#define RCC_AHB1Periph_DMA1 ((uint32_t)0x00200000)
#define RCC_AHB1Periph_DMA2 ((uint32_t)0x00400000)
#define RCC_AHB1Periph_DMA2D ((uint32_t)0x00800000)
#define RCC_AHB1Periph_ETH_MAC ((uint32_t)0x02000000)
#define RCC_AHB1Periph_ETH_MAC_Tx ((uint32_t)0x04000000)
#define RCC_AHB1Periph_ETH_MAC_Rx ((uint32_t)0x08000000)
#define RCC_AHB1Periph_ETH_MAC_PTP ((uint32_t)0x10000000)
#define RCC_AHB1Periph_OTG_HS ((uint32_t)0x20000000)
#define RCC_AHB1Periph_OTG_HS_ULPI ((uint32_t)0x40000000)
#define IS_RCC_AHB1_CLOCK_PERIPH(PERIPH) ((((PERIPH) & 0x810BE800) == 0x00) && ((PERIPH) != 0x00))
#define IS_RCC_AHB1_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xDD1FE800) == 0x00) && ((PERIPH) != 0x00))
#define IS_RCC_AHB1_LPMODE_PERIPH(PERIPH) ((((PERIPH) & 0x81106800) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/** @defgroup RCC_AHB2_Peripherals
* @{
*/
#define RCC_AHB2Periph_DCMI ((uint32_t)0x00000001)
#define RCC_AHB2Periph_CRYP ((uint32_t)0x00000010)
#define RCC_AHB2Periph_HASH ((uint32_t)0x00000020)
#define RCC_AHB2Periph_RNG ((uint32_t)0x00000040)
#define RCC_AHB2Periph_OTG_FS ((uint32_t)0x00000080)
#define IS_RCC_AHB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFF0E) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/** @defgroup RCC_AHB3_Peripherals
* @{
*/
#if defined(STM32F40_41xxx)
#define RCC_AHB3Periph_FSMC ((uint32_t)0x00000001)
#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFE) == 0x00) && ((PERIPH) != 0x00))
#endif /* STM32F40_41xxx */
#if defined(STM32F427_437xx) || defined(STM32F429_439xx)
#define RCC_AHB3Periph_FMC ((uint32_t)0x00000001)
#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFE) == 0x00) && ((PERIPH) != 0x00))
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined(STM32F446xx)
#define RCC_AHB3Periph_FMC ((uint32_t)0x00000001)
#define RCC_AHB3Periph_QSPI ((uint32_t)0x00000002)
#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFC) == 0x00) && ((PERIPH) != 0x00))
#endif /* STM32F446xx */
/**
* @}
*/
/** @defgroup RCC_APB1_Peripherals
* @{
*/
#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001)
#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002)
#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004)
#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008)
#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010)
#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020)
#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040)
#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080)
#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100)
#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800)
#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000)
#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000)
#if defined(STM32F446xx)
#define RCC_APB1Periph_SPDIFRX ((uint32_t)0x00010000)
#endif /* STM32F446xx */
#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000)
#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000)
#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000)
#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000)
#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000)
#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000)
#define RCC_APB1Periph_I2C3 ((uint32_t)0x00800000)
#if defined(STM32F446xx)
#define RCC_APB1Periph_FMPI2C1 ((uint32_t)0x01000000)
#endif /* STM32F446xx */
#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000)
#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000)
#if defined(STM32F446xx)
#define RCC_APB1Periph_CEC ((uint32_t)0x08000000)
#endif /* STM32F446xx */
#define RCC_APB1Periph_PWR ((uint32_t)0x10000000)
#define RCC_APB1Periph_DAC ((uint32_t)0x20000000)
#define RCC_APB1Periph_UART7 ((uint32_t)0x40000000)
#define RCC_APB1Periph_UART8 ((uint32_t)0x80000000)
#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x00003600) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/** @defgroup RCC_APB2_Peripherals
* @{
*/
#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000001)
#define RCC_APB2Periph_TIM8 ((uint32_t)0x00000002)
#define RCC_APB2Periph_USART1 ((uint32_t)0x00000010)
#define RCC_APB2Periph_USART6 ((uint32_t)0x00000020)
#define RCC_APB2Periph_ADC ((uint32_t)0x00000100)
#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000100)
#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000200)
#define RCC_APB2Periph_ADC3 ((uint32_t)0x00000400)
#define RCC_APB2Periph_SDIO ((uint32_t)0x00000800)
#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000)
#define RCC_APB2Periph_SPI4 ((uint32_t)0x00002000)
#define RCC_APB2Periph_SYSCFG ((uint32_t)0x00004000)
#define RCC_APB2Periph_TIM9 ((uint32_t)0x00010000)
#define RCC_APB2Periph_TIM10 ((uint32_t)0x00020000)
#define RCC_APB2Periph_TIM11 ((uint32_t)0x00040000)
#define RCC_APB2Periph_SPI5 ((uint32_t)0x00100000)
#define RCC_APB2Periph_SPI6 ((uint32_t)0x00200000)
#define RCC_APB2Periph_SAI1 ((uint32_t)0x00400000)
#if defined(STM32F446xx)
#define RCC_APB2Periph_SAI2 ((uint32_t)0x00800000)
#endif /* STM32F446xx */
#define RCC_APB2Periph_LTDC ((uint32_t)0x04000000)
#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xF30880CC) == 0x00) && ((PERIPH) != 0x00))
#define IS_RCC_APB2_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xF30886CC) == 0x00) && ((PERIPH) != 0x00))
/**
* @}
*/
/** @defgroup RCC_MCO1_Clock_Source_Prescaler
* @{
*/
#define RCC_MCO1Source_HSI ((uint32_t)0x00000000)
#define RCC_MCO1Source_LSE ((uint32_t)0x00200000)
#define RCC_MCO1Source_HSE ((uint32_t)0x00400000)
#define RCC_MCO1Source_PLLCLK ((uint32_t)0x00600000)
#define RCC_MCO1Div_1 ((uint32_t)0x00000000)
#define RCC_MCO1Div_2 ((uint32_t)0x04000000)
#define RCC_MCO1Div_3 ((uint32_t)0x05000000)
#define RCC_MCO1Div_4 ((uint32_t)0x06000000)
#define RCC_MCO1Div_5 ((uint32_t)0x07000000)
#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1Source_HSI) || ((SOURCE) == RCC_MCO1Source_LSE) || \
((SOURCE) == RCC_MCO1Source_HSE) || ((SOURCE) == RCC_MCO1Source_PLLCLK))
#define IS_RCC_MCO1DIV(DIV) (((DIV) == RCC_MCO1Div_1) || ((DIV) == RCC_MCO1Div_2) || \
((DIV) == RCC_MCO1Div_3) || ((DIV) == RCC_MCO1Div_4) || \
((DIV) == RCC_MCO1Div_5))
/**
* @}
*/
/** @defgroup RCC_MCO2_Clock_Source_Prescaler
* @{
*/
#define RCC_MCO2Source_SYSCLK ((uint32_t)0x00000000)
#define RCC_MCO2Source_PLLI2SCLK ((uint32_t)0x40000000)
#define RCC_MCO2Source_HSE ((uint32_t)0x80000000)
#define RCC_MCO2Source_PLLCLK ((uint32_t)0xC0000000)
#define RCC_MCO2Div_1 ((uint32_t)0x00000000)
#define RCC_MCO2Div_2 ((uint32_t)0x20000000)
#define RCC_MCO2Div_3 ((uint32_t)0x28000000)
#define RCC_MCO2Div_4 ((uint32_t)0x30000000)
#define RCC_MCO2Div_5 ((uint32_t)0x38000000)
#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2Source_SYSCLK) || ((SOURCE) == RCC_MCO2Source_PLLI2SCLK)|| \
((SOURCE) == RCC_MCO2Source_HSE) || ((SOURCE) == RCC_MCO2Source_PLLCLK))
#define IS_RCC_MCO2DIV(DIV) (((DIV) == RCC_MCO2Div_1) || ((DIV) == RCC_MCO2Div_2) || \
((DIV) == RCC_MCO2Div_3) || ((DIV) == RCC_MCO2Div_4) || \
((DIV) == RCC_MCO2Div_5))
/**
* @}
*/
/** @defgroup RCC_Flag
* @{
*/
#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
#define RCC_FLAG_HSERDY ((uint8_t)0x31)
#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
#define RCC_FLAG_PLLSAIRDY ((uint8_t)0x3D)
#define RCC_FLAG_LSERDY ((uint8_t)0x41)
#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
#define RCC_FLAG_BORRST ((uint8_t)0x79)
#define RCC_FLAG_PINRST ((uint8_t)0x7A)
#define RCC_FLAG_PORRST ((uint8_t)0x7B)
#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_BORRST) || \
((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \
((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST)|| \
((FLAG) == RCC_FLAG_WWDGRST) || ((FLAG) == RCC_FLAG_LPWRRST)|| \
((FLAG) == RCC_FLAG_PLLI2SRDY)|| ((FLAG) == RCC_FLAG_PLLSAIRDY))
#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the RCC clock configuration to the default reset state */
void RCC_DeInit(void);
/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/
void RCC_HSEConfig(uint8_t RCC_HSE);
ErrorStatus RCC_WaitForHSEStartUp(void);
void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
void RCC_HSICmd(FunctionalState NewState);
void RCC_LSEConfig(uint8_t RCC_LSE);
void RCC_LSICmd(FunctionalState NewState);
void RCC_PLLCmd(FunctionalState NewState);
#if defined(STM32F446xx)
void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ, uint32_t PLLR);
#endif /* STM32F446xx */
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ);
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
void RCC_PLLI2SCmd(FunctionalState NewState);
#if defined(STM32F40_41xxx) || defined(STM32F401xx)
void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR);
#endif /* STM32F40_41xxx || STM32F401xx */
#if defined(STM32F411xE)
void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR, uint32_t PLLI2SM);
#endif /* STM32F411xE */
#if defined(STM32F427_437xx) || defined(STM32F429_439xx)
void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SQ, uint32_t PLLI2SR);
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined(STM32F446xx)
void RCC_PLLI2SConfig(uint32_t PLLI2SM, uint32_t PLLI2SN, uint32_t PLLI2SP, uint32_t PLLI2SQ, uint32_t PLLI2SR);
#endif /* STM32F446xx */
void RCC_PLLSAICmd(FunctionalState NewState);
#if defined(STM32F446xx)
void RCC_PLLSAIConfig(uint32_t PLLSAIM, uint32_t PLLSAIN, uint32_t PLLSAIP, uint32_t PLLSAIQ);
#endif /* STM32F446xx */
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
void RCC_PLLSAIConfig(uint32_t PLLSAIN, uint32_t PLLSAIQ, uint32_t PLLSAIR);
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div);
void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div);
/* System, AHB and APB busses clocks configuration functions ******************/
void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
uint8_t RCC_GetSYSCLKSource(void);
void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
void RCC_PCLK1Config(uint32_t RCC_HCLK);
void RCC_PCLK2Config(uint32_t RCC_HCLK);
void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
/* Peripheral clocks configuration functions **********************************/
void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
void RCC_RTCCLKCmd(FunctionalState NewState);
void RCC_BackupResetCmd(FunctionalState NewState);
#if defined(STM32F446xx)
void RCC_I2SCLKConfig(uint32_t RCC_I2SAPBx, uint32_t RCC_I2SCLKSource);
void RCC_SAICLKConfig(uint32_t RCC_SAIInstance, uint32_t RCC_SAICLKSource);
#endif /* STM32F446xx */
#if defined(STM32F40_41xxx) || defined(STM32F427_437xx) || defined(STM32F429_439xx) || defined(STM32F401xx) || defined(STM32F411xE)
void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource);
void RCC_SAIBlockACLKConfig(uint32_t RCC_SAIBlockACLKSource);
void RCC_SAIBlockBCLKConfig(uint32_t RCC_SAIBlockBCLKSource);
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
void RCC_SAIPLLI2SClkDivConfig(uint32_t RCC_PLLI2SDivQ);
void RCC_SAIPLLSAIClkDivConfig(uint32_t RCC_PLLSAIDivQ);
void RCC_LTDCCLKDivConfig(uint32_t RCC_PLLSAIDivR);
void RCC_TIMCLKPresConfig(uint32_t RCC_TIMCLKPrescaler);
void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
/* Features available only for STM32F411xx/STM32F446xx devices */
void RCC_LSEModeConfig(uint8_t RCC_Mode);
/* Features available only for STM32F446xx devices */
#if defined(STM32F446xx)
void RCC_48MHzClockSourceConfig(uint8_t RCC_ClockSource);
void RCC_SDIOClockSourceConfig(uint8_t RCC_ClockSource);
#endif /* STM32F446xx */
/* Features available only for STM32F446xx devices */
#if defined(STM32F446xx)
void RCC_AHB1ClockGatingCmd(uint32_t RCC_AHB1ClockGating, FunctionalState NewState);
void RCC_SPDIFRXClockSourceConfig(uint8_t RCC_ClockSource);
void RCC_CECClockSourceConfig(uint8_t RCC_ClockSource);
void RCC_FMPI2C1ClockSourceConfig(uint32_t RCC_ClockSource);
#endif /* STM32F446xx */
/* Interrupts and flags management functions **********************************/
void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
void RCC_ClearFlag(void);
ITStatus RCC_GetITStatus(uint8_t RCC_IT);
void RCC_ClearITPendingBit(uint8_t RCC_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_RCC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

120
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rng.h Normal file
View file

@ -0,0 +1,120 @@
/**
******************************************************************************
* @file stm32f4xx_rng.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the Random
* Number Generator(RNG) firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_RNG_H
#define __STM32F4xx_RNG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup RNG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RNG_Exported_Constants
* @{
*/
/** @defgroup RNG_flags_definition
* @{
*/
#define RNG_FLAG_DRDY ((uint8_t)0x0001) /*!< Data ready */
#define RNG_FLAG_CECS ((uint8_t)0x0002) /*!< Clock error current status */
#define RNG_FLAG_SECS ((uint8_t)0x0004) /*!< Seed error current status */
#define IS_RNG_GET_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_DRDY) || \
((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
#define IS_RNG_CLEAR_FLAG(RNG_FLAG) (((RNG_FLAG) == RNG_FLAG_CECS) || \
((RNG_FLAG) == RNG_FLAG_SECS))
/**
* @}
*/
/** @defgroup RNG_interrupts_definition
* @{
*/
#define RNG_IT_CEI ((uint8_t)0x20) /*!< Clock error interrupt */
#define RNG_IT_SEI ((uint8_t)0x40) /*!< Seed error interrupt */
#define IS_RNG_IT(IT) ((((IT) & (uint8_t)0x9F) == 0x00) && ((IT) != 0x00))
#define IS_RNG_GET_IT(RNG_IT) (((RNG_IT) == RNG_IT_CEI) || ((RNG_IT) == RNG_IT_SEI))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the RNG configuration to the default reset state *****/
void RNG_DeInit(void);
/* Configuration function *****************************************************/
void RNG_Cmd(FunctionalState NewState);
/* Get 32 bit Random number function ******************************************/
uint32_t RNG_GetRandomNumber(void);
/* Interrupts and flags management functions **********************************/
void RNG_ITConfig(FunctionalState NewState);
FlagStatus RNG_GetFlagStatus(uint8_t RNG_FLAG);
void RNG_ClearFlag(uint8_t RNG_FLAG);
ITStatus RNG_GetITStatus(uint8_t RNG_IT);
void RNG_ClearITPendingBit(uint8_t RNG_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_RNG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

881
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rtc.h Normal file
View file

@ -0,0 +1,881 @@
/**
******************************************************************************
* @file stm32f4xx_rtc.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_RTC_H
#define __STM32F4xx_RTC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup RTC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief RTC Init structures definition
*/
typedef struct
{
uint32_t RTC_HourFormat; /*!< Specifies the RTC Hour Format.
This parameter can be a value of @ref RTC_Hour_Formats */
uint32_t RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
This parameter must be set to a value lower than 0x7F */
uint32_t RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
This parameter must be set to a value lower than 0x7FFF */
}RTC_InitTypeDef;
/**
* @brief RTC Time structure definition
*/
typedef struct
{
uint8_t RTC_Hours; /*!< Specifies the RTC Time Hour.
This parameter must be set to a value in the 0-12 range
if the RTC_HourFormat_12 is selected or 0-23 range if
the RTC_HourFormat_24 is selected. */
uint8_t RTC_Minutes; /*!< Specifies the RTC Time Minutes.
This parameter must be set to a value in the 0-59 range. */
uint8_t RTC_Seconds; /*!< Specifies the RTC Time Seconds.
This parameter must be set to a value in the 0-59 range. */
uint8_t RTC_H12; /*!< Specifies the RTC AM/PM Time.
This parameter can be a value of @ref RTC_AM_PM_Definitions */
}RTC_TimeTypeDef;
/**
* @brief RTC Date structure definition
*/
typedef struct
{
uint8_t RTC_WeekDay; /*!< Specifies the RTC Date WeekDay.
This parameter can be a value of @ref RTC_WeekDay_Definitions */
uint8_t RTC_Month; /*!< Specifies the RTC Date Month (in BCD format).
This parameter can be a value of @ref RTC_Month_Date_Definitions */
uint8_t RTC_Date; /*!< Specifies the RTC Date.
This parameter must be set to a value in the 1-31 range. */
uint8_t RTC_Year; /*!< Specifies the RTC Date Year.
This parameter must be set to a value in the 0-99 range. */
}RTC_DateTypeDef;
/**
* @brief RTC Alarm structure definition
*/
typedef struct
{
RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */
uint32_t RTC_AlarmMask; /*!< Specifies the RTC Alarm Masks.
This parameter can be a value of @ref RTC_AlarmMask_Definitions */
uint32_t RTC_AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
uint8_t RTC_AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
If the Alarm Date is selected, this parameter
must be set to a value in the 1-31 range.
If the Alarm WeekDay is selected, this
parameter can be a value of @ref RTC_WeekDay_Definitions */
}RTC_AlarmTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_Exported_Constants
* @{
*/
/** @defgroup RTC_Hour_Formats
* @{
*/
#define RTC_HourFormat_24 ((uint32_t)0x00000000)
#define RTC_HourFormat_12 ((uint32_t)0x00000040)
#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \
((FORMAT) == RTC_HourFormat_24))
/**
* @}
*/
/** @defgroup RTC_Asynchronous_Predivider
* @{
*/
#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7F)
/**
* @}
*/
/** @defgroup RTC_Synchronous_Predivider
* @{
*/
#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFF)
/**
* @}
*/
/** @defgroup RTC_Time_Definitions
* @{
*/
#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12))
#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23)
#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59)
#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59)
/**
* @}
*/
/** @defgroup RTC_AM_PM_Definitions
* @{
*/
#define RTC_H12_AM ((uint8_t)0x00)
#define RTC_H12_PM ((uint8_t)0x40)
#define IS_RTC_H12(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM))
/**
* @}
*/
/** @defgroup RTC_Year_Date_Definitions
* @{
*/
#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99)
/**
* @}
*/
/** @defgroup RTC_Month_Date_Definitions
* @{
*/
/* Coded in BCD format */
#define RTC_Month_January ((uint8_t)0x01)
#define RTC_Month_February ((uint8_t)0x02)
#define RTC_Month_March ((uint8_t)0x03)
#define RTC_Month_April ((uint8_t)0x04)
#define RTC_Month_May ((uint8_t)0x05)
#define RTC_Month_June ((uint8_t)0x06)
#define RTC_Month_July ((uint8_t)0x07)
#define RTC_Month_August ((uint8_t)0x08)
#define RTC_Month_September ((uint8_t)0x09)
#define RTC_Month_October ((uint8_t)0x10)
#define RTC_Month_November ((uint8_t)0x11)
#define RTC_Month_December ((uint8_t)0x12)
#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1) && ((MONTH) <= 12))
#define IS_RTC_DATE(DATE) (((DATE) >= 1) && ((DATE) <= 31))
/**
* @}
*/
/** @defgroup RTC_WeekDay_Definitions
* @{
*/
#define RTC_Weekday_Monday ((uint8_t)0x01)
#define RTC_Weekday_Tuesday ((uint8_t)0x02)
#define RTC_Weekday_Wednesday ((uint8_t)0x03)
#define RTC_Weekday_Thursday ((uint8_t)0x04)
#define RTC_Weekday_Friday ((uint8_t)0x05)
#define RTC_Weekday_Saturday ((uint8_t)0x06)
#define RTC_Weekday_Sunday ((uint8_t)0x07)
#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \
((WEEKDAY) == RTC_Weekday_Tuesday) || \
((WEEKDAY) == RTC_Weekday_Wednesday) || \
((WEEKDAY) == RTC_Weekday_Thursday) || \
((WEEKDAY) == RTC_Weekday_Friday) || \
((WEEKDAY) == RTC_Weekday_Saturday) || \
((WEEKDAY) == RTC_Weekday_Sunday))
/**
* @}
*/
/** @defgroup RTC_Alarm_Definitions
* @{
*/
#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0) && ((DATE) <= 31))
#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \
((WEEKDAY) == RTC_Weekday_Tuesday) || \
((WEEKDAY) == RTC_Weekday_Wednesday) || \
((WEEKDAY) == RTC_Weekday_Thursday) || \
((WEEKDAY) == RTC_Weekday_Friday) || \
((WEEKDAY) == RTC_Weekday_Saturday) || \
((WEEKDAY) == RTC_Weekday_Sunday))
/**
* @}
*/
/** @defgroup RTC_AlarmDateWeekDay_Definitions
* @{
*/
#define RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000)
#define RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000)
#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \
((SEL) == RTC_AlarmDateWeekDaySel_WeekDay))
/**
* @}
*/
/** @defgroup RTC_AlarmMask_Definitions
* @{
*/
#define RTC_AlarmMask_None ((uint32_t)0x00000000)
#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000)
#define RTC_AlarmMask_Hours ((uint32_t)0x00800000)
#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000)
#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080)
#define RTC_AlarmMask_All ((uint32_t)0x80808080)
#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
/**
* @}
*/
/** @defgroup RTC_Alarms_Definitions
* @{
*/
#define RTC_Alarm_A ((uint32_t)0x00000100)
#define RTC_Alarm_B ((uint32_t)0x00000200)
#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_Alarm_A) || ((ALARM) == RTC_Alarm_B))
#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A | RTC_Alarm_B)) != (uint32_t)RESET)
/**
* @}
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions
* @{
*/
#define RTC_AlarmSubSecondMask_All ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
There is no comparison on sub seconds
for Alarm */
#define RTC_AlarmSubSecondMask_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
comparison. Only SS[0] is compared. */
#define RTC_AlarmSubSecondMask_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
comparison. Only SS[1:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
comparison. Only SS[2:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
comparison. Only SS[3:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
comparison. Only SS[4:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
comparison. Only SS[5:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
comparison. Only SS[6:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
comparison. Only SS[7:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
comparison. Only SS[8:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
comparison. Only SS[9:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
comparison. Only SS[10:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
comparison.Only SS[11:0] are compared */
#define RTC_AlarmSubSecondMask_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
comparison. Only SS[12:0] are compared */
#define RTC_AlarmSubSecondMask_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
comparison.Only SS[13:0] are compared */
#define RTC_AlarmSubSecondMask_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
to activate alarm. */
#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \
((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \
((MASK) == RTC_AlarmSubSecondMask_SS14) || \
((MASK) == RTC_AlarmSubSecondMask_None))
/**
* @}
*/
/** @defgroup RTC_Alarm_Sub_Seconds_Value
* @{
*/
#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF)
/**
* @}
*/
/** @defgroup RTC_Wakeup_Timer_Definitions
* @{
*/
#define RTC_WakeUpClock_RTCCLK_Div16 ((uint32_t)0x00000000)
#define RTC_WakeUpClock_RTCCLK_Div8 ((uint32_t)0x00000001)
#define RTC_WakeUpClock_RTCCLK_Div4 ((uint32_t)0x00000002)
#define RTC_WakeUpClock_RTCCLK_Div2 ((uint32_t)0x00000003)
#define RTC_WakeUpClock_CK_SPRE_16bits ((uint32_t)0x00000004)
#define RTC_WakeUpClock_CK_SPRE_17bits ((uint32_t)0x00000006)
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WakeUpClock_RTCCLK_Div16) || \
((CLOCK) == RTC_WakeUpClock_RTCCLK_Div8) || \
((CLOCK) == RTC_WakeUpClock_RTCCLK_Div4) || \
((CLOCK) == RTC_WakeUpClock_RTCCLK_Div2) || \
((CLOCK) == RTC_WakeUpClock_CK_SPRE_16bits) || \
((CLOCK) == RTC_WakeUpClock_CK_SPRE_17bits))
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
/**
* @}
*/
/** @defgroup RTC_Time_Stamp_Edges_definitions
* @{
*/
#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000)
#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008)
#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \
((EDGE) == RTC_TimeStampEdge_Falling))
/**
* @}
*/
/** @defgroup RTC_Output_selection_Definitions
* @{
*/
#define RTC_Output_Disable ((uint32_t)0x00000000)
#define RTC_Output_AlarmA ((uint32_t)0x00200000)
#define RTC_Output_AlarmB ((uint32_t)0x00400000)
#define RTC_Output_WakeUp ((uint32_t)0x00600000)
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \
((OUTPUT) == RTC_Output_AlarmA) || \
((OUTPUT) == RTC_Output_AlarmB) || \
((OUTPUT) == RTC_Output_WakeUp))
/**
* @}
*/
/** @defgroup RTC_Output_Polarity_Definitions
* @{
*/
#define RTC_OutputPolarity_High ((uint32_t)0x00000000)
#define RTC_OutputPolarity_Low ((uint32_t)0x00100000)
#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \
((POL) == RTC_OutputPolarity_Low))
/**
* @}
*/
/** @defgroup RTC_Digital_Calibration_Definitions
* @{
*/
#define RTC_CalibSign_Positive ((uint32_t)0x00000000)
#define RTC_CalibSign_Negative ((uint32_t)0x00000080)
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CalibSign_Positive) || \
((SIGN) == RTC_CalibSign_Negative))
#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
/**
* @}
*/
/** @defgroup RTC_Calib_Output_selection_Definitions
* @{
*/
#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000)
#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000)
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \
((OUTPUT) == RTC_CalibOutput_1Hz))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_period_Definitions
* @{
*/
#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation
period is 32s, else 2exp20 RTCCLK seconds */
#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibration
period is 16s, else 2exp19 RTCCLK seconds */
#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation
period is 8s, else 2exp18 RTCCLK seconds */
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \
((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \
((PERIOD) == RTC_SmoothCalibPeriod_8sec))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions
* @{
*/
#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
during a X -second window = Y - CALM[8:0].
with Y = 512, 256, 128 when X = 32, 16, 8 */
#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
during a 32-second window = CALM[8:0]. */
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \
((PLUS) == RTC_SmoothCalibPlusPulses_Reset))
/**
* @}
*/
/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions
* @{
*/
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
/**
* @}
*/
/** @defgroup RTC_DayLightSaving_Definitions
* @{
*/
#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000)
#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000)
#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DayLightSaving_SUB1H) || \
((SAVE) == RTC_DayLightSaving_ADD1H))
#define RTC_StoreOperation_Reset ((uint32_t)0x00000000)
#define RTC_StoreOperation_Set ((uint32_t)0x00040000)
#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \
((OPERATION) == RTC_StoreOperation_Set))
/**
* @}
*/
/** @defgroup RTC_Tamper_Trigger_Definitions
* @{
*/
#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000)
#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001)
#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000)
#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001)
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \
((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \
((TRIGGER) == RTC_TamperTrigger_LowLevel) || \
((TRIGGER) == RTC_TamperTrigger_HighLevel))
/**
* @}
*/
/** @defgroup RTC_Tamper_Filter_Definitions
* @{
*/
#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2
consecutive samples at the active level */
#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4
consecutive samples at the active level */
#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8
consecutive samples at the active level. */
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \
((FILTER) == RTC_TamperFilter_2Sample) || \
((FILTER) == RTC_TamperFilter_4Sample) || \
((FILTER) == RTC_TamperFilter_8Sample))
/**
* @}
*/
/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions
* @{
*/
#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 32768 */
#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x000000100) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 16384 */
#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 8192 */
#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 4096 */
#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 2048 */
#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 1024 */
#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 512 */
#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 256 */
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \
((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256))
/**
* @}
*/
/** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions
* @{
*/
#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
sampling during 1 RTCCLK cycle */
#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
sampling during 2 RTCCLK cycles */
#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
sampling during 4 RTCCLK cycles */
#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
sampling during 8 RTCCLK cycles */
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \
((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK))
/**
* @}
*/
/** @defgroup RTC_Tamper_Pins_Definitions
* @{
*/
#define RTC_Tamper_1 RTC_TAFCR_TAMP1E
#define IS_RTC_TAMPER(TAMPER) (((TAMPER) == RTC_Tamper_1))
/**
* @}
*/
/** @defgroup RTC_Tamper_Pin_Selection
* @{
*/
#define RTC_TamperPin_PC13 ((uint32_t)0x00000000)
#define RTC_TamperPin_PI8 ((uint32_t)0x00010000)
#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TamperPin_PC13) || \
((PIN) == RTC_TamperPin_PI8))
/**
* @}
*/
/** @defgroup RTC_TimeStamp_Pin_Selection
* @{
*/
#define RTC_TimeStampPin_PC13 ((uint32_t)0x00000000)
#define RTC_TimeStampPin_PI8 ((uint32_t)0x00020000)
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TimeStampPin_PC13) || \
((PIN) == RTC_TimeStampPin_PI8))
/**
* @}
*/
/** @defgroup RTC_Output_Type_ALARM_OUT
* @{
*/
#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000)
#define RTC_OutputType_PushPull ((uint32_t)0x00040000)
#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \
((TYPE) == RTC_OutputType_PushPull))
/**
* @}
*/
/** @defgroup RTC_Add_1_Second_Parameter_Definitions
* @{
*/
#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000)
#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000)
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \
((SEL) == RTC_ShiftAdd1S_Set))
/**
* @}
*/
/** @defgroup RTC_Substract_Fraction_Of_Second_Value
* @{
*/
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
/**
* @}
*/
/** @defgroup RTC_Backup_Registers_Definitions
* @{
*/
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
#define RTC_BKP_DR5 ((uint32_t)0x00000005)
#define RTC_BKP_DR6 ((uint32_t)0x00000006)
#define RTC_BKP_DR7 ((uint32_t)0x00000007)
#define RTC_BKP_DR8 ((uint32_t)0x00000008)
#define RTC_BKP_DR9 ((uint32_t)0x00000009)
#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
#define RTC_BKP_DR16 ((uint32_t)0x00000010)
#define RTC_BKP_DR17 ((uint32_t)0x00000011)
#define RTC_BKP_DR18 ((uint32_t)0x00000012)
#define RTC_BKP_DR19 ((uint32_t)0x00000013)
#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
((BKP) == RTC_BKP_DR1) || \
((BKP) == RTC_BKP_DR2) || \
((BKP) == RTC_BKP_DR3) || \
((BKP) == RTC_BKP_DR4) || \
((BKP) == RTC_BKP_DR5) || \
((BKP) == RTC_BKP_DR6) || \
((BKP) == RTC_BKP_DR7) || \
((BKP) == RTC_BKP_DR8) || \
((BKP) == RTC_BKP_DR9) || \
((BKP) == RTC_BKP_DR10) || \
((BKP) == RTC_BKP_DR11) || \
((BKP) == RTC_BKP_DR12) || \
((BKP) == RTC_BKP_DR13) || \
((BKP) == RTC_BKP_DR14) || \
((BKP) == RTC_BKP_DR15) || \
((BKP) == RTC_BKP_DR16) || \
((BKP) == RTC_BKP_DR17) || \
((BKP) == RTC_BKP_DR18) || \
((BKP) == RTC_BKP_DR19))
/**
* @}
*/
/** @defgroup RTC_Input_parameter_format_definitions
* @{
*/
#define RTC_Format_BIN ((uint32_t)0x000000000)
#define RTC_Format_BCD ((uint32_t)0x000000001)
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD))
/**
* @}
*/
/** @defgroup RTC_Flags_Definitions
* @{
*/
#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
#define RTC_FLAG_TSF ((uint32_t)0x00000800)
#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
#define RTC_FLAG_INITF ((uint32_t)0x00000040)
#define RTC_FLAG_RSF ((uint32_t)0x00000020)
#define RTC_FLAG_INITS ((uint32_t)0x00000010)
#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \
((FLAG) == RTC_FLAG_WUTF) || ((FLAG) == RTC_FLAG_ALRBF) || \
((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \
((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_WUTWF) || \
((FLAG) == RTC_FLAG_ALRBWF) || ((FLAG) == RTC_FLAG_ALRAWF) || \
((FLAG) == RTC_FLAG_TAMP1F) || ((FLAG) == RTC_FLAG_RECALPF) || \
((FLAG) == RTC_FLAG_SHPF))
#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF00DF) == (uint32_t)RESET))
/**
* @}
*/
/** @defgroup RTC_Interrupts_Definitions
* @{
*/
#define RTC_IT_TS ((uint32_t)0x00008000)
#define RTC_IT_WUT ((uint32_t)0x00004000)
#define RTC_IT_ALRB ((uint32_t)0x00002000)
#define RTC_IT_ALRA ((uint32_t)0x00001000)
#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF0FFB) == (uint32_t)RESET))
#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_WUT) || \
((IT) == RTC_IT_ALRB) || ((IT) == RTC_IT_ALRA) || \
((IT) == RTC_IT_TAMP1))
#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFD0FFF) == (uint32_t)RESET))
/**
* @}
*/
/** @defgroup RTC_Legacy
* @{
*/
#define RTC_DigitalCalibConfig RTC_CoarseCalibConfig
#define RTC_DigitalCalibCmd RTC_CoarseCalibCmd
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the RTC configuration to the default reset state *****/
ErrorStatus RTC_DeInit(void);
/* Initialization and Configuration functions *********************************/
ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct);
void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct);
void RTC_WriteProtectionCmd(FunctionalState NewState);
ErrorStatus RTC_EnterInitMode(void);
void RTC_ExitInitMode(void);
ErrorStatus RTC_WaitForSynchro(void);
ErrorStatus RTC_RefClockCmd(FunctionalState NewState);
void RTC_BypassShadowCmd(FunctionalState NewState);
/* Time and Date configuration functions **************************************/
ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct);
void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
uint32_t RTC_GetSubSecond(void);
ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct);
void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct);
void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct);
/* Alarms (Alarm A and Alarm B) configuration functions **********************/
void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct);
void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct);
void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct);
ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState);
void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask);
uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm);
/* WakeUp Timer configuration functions ***************************************/
void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock);
void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter);
uint32_t RTC_GetWakeUpCounter(void);
ErrorStatus RTC_WakeUpCmd(FunctionalState NewState);
/* Daylight Saving configuration functions ************************************/
void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation);
uint32_t RTC_GetStoreOperation(void);
/* Output pin Configuration function ******************************************/
void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity);
/* Digital Calibration configuration functions *********************************/
ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value);
ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState);
void RTC_CalibOutputCmd(FunctionalState NewState);
void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput);
ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod,
uint32_t RTC_SmoothCalibPlusPulses,
uint32_t RTC_SmouthCalibMinusPulsesValue);
/* TimeStamp configuration functions ******************************************/
void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState);
void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct,
RTC_DateTypeDef* RTC_StampDateStruct);
uint32_t RTC_GetTimeStampSubSecond(void);
/* Tampers configuration functions ********************************************/
void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger);
void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState);
void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter);
void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq);
void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration);
void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState);
void RTC_TamperPullUpCmd(FunctionalState NewState);
/* Backup Data Registers configuration functions ******************************/
void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data);
uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR);
/* RTC Tamper and TimeStamp Pins Selection and Output Type Config configuration
functions ******************************************************************/
void RTC_TamperPinSelection(uint32_t RTC_TamperPin);
void RTC_TimeStampPinSelection(uint32_t RTC_TimeStampPin);
void RTC_OutputTypeConfig(uint32_t RTC_OutputType);
/* RTC_Shift_control_synchonisation_functions *********************************/
ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS);
/* Interrupts and flags management functions **********************************/
void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState);
FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG);
void RTC_ClearFlag(uint32_t RTC_FLAG);
ITStatus RTC_GetITStatus(uint32_t RTC_IT);
void RTC_ClearITPendingBit(uint32_t RTC_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_RTC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

622
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_sai.h Normal file
View file

@ -0,0 +1,622 @@
/**
******************************************************************************
* @file stm32f4xx_sai.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the SAI
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SAI_H
#define __STM32F4xx_SAI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SAI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief SAI Block Init structure definition
*/
typedef struct
{
uint32_t SAI_AudioMode; /*!< Specifies the SAI Block Audio Mode.
This parameter can be a value of @ref SAI_Block_Mode */
uint32_t SAI_Protocol; /*!< Specifies the SAI Block Protocol.
This parameter can be a value of @ref SAI_Block_Protocol */
uint32_t SAI_DataSize; /*!< Specifies the SAI Block data size.
This parameter can be a value of @ref SAI_Block_Data_Size
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission
@note this value has no meaning when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
This parameter can be a value of @ref SAI_Block_Clock_Strobing */
uint32_t SAI_Synchro; /*!< Specifies SAI Block synchronization
This parameter can be a value of @ref SAI_Block_Synchronization */
uint32_t SAI_OUTDRIV; /*!< Specifies when SAI Block outputs are driven.
This parameter can be a value of @ref SAI_Block_Output_Drive
@note this value has to be set before enabling the audio block
but after the audio block configuration. */
uint32_t SAI_NoDivider; /*!< Specifies whether Master Clock will be divided or not.
This parameter can be a value of @ref SAI_Block_NoDivider */
uint32_t SAI_MasterDivider; /*!< Specifies SAI Block Master Clock Divider.
@note the Master Clock Frequency is calculated accordingly to the
following formula : MCLK_x = SAI_CK_x/(MCKDIV[3:0]*2)*/
uint32_t SAI_FIFOThreshold; /*!< Specifies SAI Block FIFO Threshold.
This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
}SAI_InitTypeDef;
/**
* @brief SAI Block Frame Init structure definition
*/
typedef struct
{
uint32_t SAI_FrameLength; /*!< Specifies the Frame Length, the number of SCK clocks
for each audio frame.
This parameter must be a number between 8 and 256.
@note If master Clock MCLK_x pin is declared as an output, the frame length
should be Aligned to a number equal to power of 2 in order to keep
in an audio frame, an integer number of MCLK pulses by bit Clock.
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
This Parameter specifies the length in number of bit clock (SCK + 1)
of the active level of FS signal in audio frame.
This parameter must be a number between 1 and 128.
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_FSDefinition; /*!< Specifies the Frame Synchronization definition.
This parameter can be a value of @ref SAI_Block_FS_Definition
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_FSPolarity; /*!< Specifies the Frame Synchronization Polarity.
This parameter can be a value of @ref SAI_Block_FS_Polarity
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_FSOffset; /*!< Specifies the Frame Synchronization Offset.
This parameter can be a value of @ref SAI_Block_FS_Offset
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
}SAI_FrameInitTypeDef;
/**
* @brief SAI Block Slot Init Structure definition
*/
typedef struct
{
uint32_t SAI_FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
This parameter must be a number between 0 and 24.
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_SlotSize; /*!< Specifies the Slot Size.
This parameter can be a value of @ref SAI_Block_Slot_Size
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_SlotNumber; /*!< Specifies the number of slot in the audio frame.
This parameter must be a number between 1 and 16.
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
uint32_t SAI_SlotActive; /*!< Specifies the slots in audio frame that will be activated.
This parameter can be a value of @ ref SAI_Block_Slot_Active
@note this value is ignored when AC'97 or SPDIF protocols are selected.*/
}SAI_SlotInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup SAI_Exported_Constants
* @{
*/
#if defined(STM32F446xx)
#define IS_SAI_PERIPH(PERIPH) (((PERIPH) == SAI1) || (PERIPH) == SAI2)
#define IS_SAI_BLOCK_PERIPH(PERIPH) (((PERIPH) == SAI1_Block_A) || \
((PERIPH) == SAI1_Block_B) || \
((PERIPH) == SAI2_Block_A) || \
((PERIPH) == SAI2_Block_B))
#endif /* STM32F446xx */
#if defined (STM32F40_41xxx) || defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F401xx) || defined (STM32F411xE)
#define IS_SAI_PERIPH(PERIPH) ((PERIPH) == SAI1)
#define IS_SAI_BLOCK_PERIPH(PERIPH) (((PERIPH) == SAI1_Block_A) || \
((PERIPH) == SAI1_Block_B))
#endif /* STM32F40_41xxx || STM32F427_437xx || STM32F429_439xx || STM32F401xx || STM32F411xE */
/** @defgroup SAI_Block_Mode
* @{
*/
#define SAI_Mode_MasterTx ((uint32_t)0x00000000)
#define SAI_Mode_MasterRx ((uint32_t)0x00000001)
#define SAI_Mode_SlaveTx ((uint32_t)0x00000002)
#define SAI_Mode_SlaveRx ((uint32_t)0x00000003)
#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_Mode_MasterTx) || \
((MODE) == SAI_Mode_MasterRx) || \
((MODE) == SAI_Mode_SlaveTx) || \
((MODE) == SAI_Mode_SlaveRx))
/**
* @}
*/
/** @defgroup SAI_Block_Protocol
* @{
*/
#define SAI_Free_Protocol ((uint32_t)0x00000000)
#define SAI_SPDIF_Protocol ((uint32_t)SAI_xCR1_PRTCFG_0)
#define SAI_AC97_Protocol ((uint32_t)SAI_xCR1_PRTCFG_1)
#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_Free_Protocol) || \
((PROTOCOL) == SAI_SPDIF_Protocol) || \
((PROTOCOL) == SAI_AC97_Protocol))
/**
* @}
*/
/** @defgroup SAI_Block_Data_Size
* @{
*/
#define SAI_DataSize_8b ((uint32_t)0x00000040)
#define SAI_DataSize_10b ((uint32_t)0x00000060)
#define SAI_DataSize_16b ((uint32_t)0x00000080)
#define SAI_DataSize_20b ((uint32_t)0x000000A0)
#define SAI_DataSize_24b ((uint32_t)0x000000C0)
#define SAI_DataSize_32b ((uint32_t)0x000000E0)
#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DataSize_8b) || \
((DATASIZE) == SAI_DataSize_10b) || \
((DATASIZE) == SAI_DataSize_16b) || \
((DATASIZE) == SAI_DataSize_20b) || \
((DATASIZE) == SAI_DataSize_24b) || \
((DATASIZE) == SAI_DataSize_32b))
/**
* @}
*/
/** @defgroup SAI_Block_MSB_LSB_transmission
* @{
*/
#define SAI_FirstBit_MSB ((uint32_t)0x00000000)
#define SAI_FirstBit_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FirstBit_MSB) || \
((BIT) == SAI_FirstBit_LSB))
/**
* @}
*/
/** @defgroup SAI_Block_Clock_Strobing
* @{
*/
#define SAI_ClockStrobing_FallingEdge ((uint32_t)0x00000000)
#define SAI_ClockStrobing_RisingEdge ((uint32_t)SAI_xCR1_CKSTR)
#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_ClockStrobing_FallingEdge) || \
((CLOCK) == SAI_ClockStrobing_RisingEdge))
/**
* @}
*/
/** @defgroup SAI_Block_Synchronization
* @{
*/
#define SAI_Asynchronous ((uint32_t)0x00000000)
#define SAI_Synchronous ((uint32_t)SAI_xCR1_SYNCEN_0)
#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_Synchronous) || \
((SYNCHRO) == SAI_Asynchronous))
/**
* @}
*/
/** @defgroup SAI_Block_Output_Drive
* @{
*/
#define SAI_OutputDrive_Disabled ((uint32_t)0x00000000)
#define SAI_OutputDrive_Enabled ((uint32_t)SAI_xCR1_OUTDRIV)
#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OutputDrive_Disabled) || \
((DRIVE) == SAI_OutputDrive_Enabled))
/**
* @}
*/
/** @defgroup SAI_Block_NoDivider
* @{
*/
#define SAI_MasterDivider_Enabled ((uint32_t)0x00000000)
#define SAI_MasterDivider_Disabled ((uint32_t)SAI_xCR1_NODIV)
#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MasterDivider_Enabled) || \
((NODIVIDER) == SAI_MasterDivider_Disabled))
/**
* @}
*/
/** @defgroup SAI_Block_Master_Divider
* @{
*/
#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)
/**
* @}
*/
/** @defgroup SAI_Block_Frame_Length
* @{
*/
#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))
/**
* @}
*/
/** @defgroup SAI_Block_Active_FrameLength
* @{
*/
#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))
/**
* @}
*/
/** @defgroup SAI_Block_FS_Definition
* @{
*/
#define SAI_FS_StartFrame ((uint32_t)0x00000000)
#define I2S_FS_ChannelIdentification ((uint32_t)SAI_xFRCR_FSDEF)
#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_StartFrame) || \
((DEFINITION) == I2S_FS_ChannelIdentification))
/**
* @}
*/
/** @defgroup SAI_Block_FS_Polarity
* @{
*/
#define SAI_FS_ActiveLow ((uint32_t)0x00000000)
#define SAI_FS_ActiveHigh ((uint32_t)SAI_xFRCR_FSPO)
#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ActiveLow) || \
((POLARITY) == SAI_FS_ActiveHigh))
/**
* @}
*/
/** @defgroup SAI_Block_FS_Offset
* @{
*/
#define SAI_FS_FirstBit ((uint32_t)0x00000000)
#define SAI_FS_BeforeFirstBit ((uint32_t)SAI_xFRCR_FSOFF)
#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FirstBit) || \
((OFFSET) == SAI_FS_BeforeFirstBit))
/**
* @}
*/
/** @defgroup SAI_Block_Slot_FirstBit_Offset
* @{
*/
#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24)
/**
* @}
*/
/** @defgroup SAI_Block_Slot_Size
* @{
*/
#define SAI_SlotSize_DataSize ((uint32_t)0x00000000)
#define SAI_SlotSize_16b ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
#define SAI_SlotSize_32b ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SlotSize_DataSize) || \
((SIZE) == SAI_SlotSize_16b) || \
((SIZE) == SAI_SlotSize_32b))
/**
* @}
*/
/** @defgroup SAI_Block_Slot_Number
* @{
*/
#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))
/**
* @}
*/
/** @defgroup SAI_Block_Slot_Active
* @{
*/
#define SAI_Slot_NotActive ((uint32_t)0x00000000)
#define SAI_SlotActive_0 ((uint32_t)0x00010000)
#define SAI_SlotActive_1 ((uint32_t)0x00020000)
#define SAI_SlotActive_2 ((uint32_t)0x00040000)
#define SAI_SlotActive_3 ((uint32_t)0x00080000)
#define SAI_SlotActive_4 ((uint32_t)0x00100000)
#define SAI_SlotActive_5 ((uint32_t)0x00200000)
#define SAI_SlotActive_6 ((uint32_t)0x00400000)
#define SAI_SlotActive_7 ((uint32_t)0x00800000)
#define SAI_SlotActive_8 ((uint32_t)0x01000000)
#define SAI_SlotActive_9 ((uint32_t)0x02000000)
#define SAI_SlotActive_10 ((uint32_t)0x04000000)
#define SAI_SlotActive_11 ((uint32_t)0x08000000)
#define SAI_SlotActive_12 ((uint32_t)0x10000000)
#define SAI_SlotActive_13 ((uint32_t)0x20000000)
#define SAI_SlotActive_14 ((uint32_t)0x40000000)
#define SAI_SlotActive_15 ((uint32_t)0x80000000)
#define SAI_SlotActive_ALL ((uint32_t)0xFFFF0000)
#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) != 0)
/**
* @}
*/
/** @defgroup SAI_Mono_Streo_Mode
* @{
*/
#define SAI_MonoMode ((uint32_t)SAI_xCR1_MONO)
#define SAI_StreoMode ((uint32_t)0x00000000)
#define IS_SAI_BLOCK_MONO_STREO_MODE(MODE) (((MODE) == SAI_MonoMode) ||\
((MODE) == SAI_StreoMode))
/**
* @}
*/
/** @defgroup SAI_TRIState_Management
* @{
*/
#define SAI_Output_NotReleased ((uint32_t)0x00000000)
#define SAI_Output_Released ((uint32_t)SAI_xCR2_TRIS)
#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_Output_NotReleased) ||\
((STATE) == SAI_Output_Released))
/**
* @}
*/
/** @defgroup SAI_Block_Fifo_Threshold
* @{
*/
#define SAI_Threshold_FIFOEmpty ((uint32_t)0x00000000)
#define SAI_FIFOThreshold_1QuarterFull ((uint32_t)0x00000001)
#define SAI_FIFOThreshold_HalfFull ((uint32_t)0x00000002)
#define SAI_FIFOThreshold_3QuartersFull ((uint32_t)0x00000003)
#define SAI_FIFOThreshold_Full ((uint32_t)0x00000004)
#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_Threshold_FIFOEmpty) || \
((THRESHOLD) == SAI_FIFOThreshold_1QuarterFull) || \
((THRESHOLD) == SAI_FIFOThreshold_HalfFull) || \
((THRESHOLD) == SAI_FIFOThreshold_3QuartersFull) || \
((THRESHOLD) == SAI_FIFOThreshold_Full))
/**
* @}
*/
/** @defgroup SAI_Block_Companding_Mode
* @{
*/
#define SAI_NoCompanding ((uint32_t)0x00000000)
#define SAI_ULaw_1CPL_Companding ((uint32_t)0x00008000)
#define SAI_ALaw_1CPL_Companding ((uint32_t)0x0000C000)
#define SAI_ULaw_2CPL_Companding ((uint32_t)0x0000A000)
#define SAI_ALaw_2CPL_Companding ((uint32_t)0x0000E000)
#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NoCompanding) || \
((MODE) == SAI_ULaw_1CPL_Companding) || \
((MODE) == SAI_ALaw_1CPL_Companding) || \
((MODE) == SAI_ULaw_2CPL_Companding) || \
((MODE) == SAI_ALaw_2CPL_Companding))
/**
* @}
*/
/** @defgroup SAI_Block_Mute_Value
* @{
*/
#define SAI_ZeroValue ((uint32_t)0x00000000)
#define SAI_LastSentValue ((uint32_t)SAI_xCR2_MUTEVAL)
#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZeroValue) || \
((VALUE) == SAI_LastSentValue))
/**
* @}
*/
/** @defgroup SAI_Block_Mute_Frame_Counter
* @{
*/
#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
/**
* @}
*/
/** @defgroup SAI_Block_Interrupts_Definition
* @{
*/
#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
#define IS_SAI_BLOCK_CONFIG_IT(IT) (((IT) == SAI_IT_OVRUDR) || \
((IT) == SAI_IT_MUTEDET) || \
((IT) == SAI_IT_WCKCFG) || \
((IT) == SAI_IT_FREQ) || \
((IT) == SAI_IT_CNRDY) || \
((IT) == SAI_IT_AFSDET) || \
((IT) == SAI_IT_LFSDET))
/**
* @}
*/
/** @defgroup SAI_Block_Flags_Definition
* @{
*/
#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
#define IS_SAI_BLOCK_GET_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
((FLAG) == SAI_FLAG_MUTEDET) || \
((FLAG) == SAI_FLAG_WCKCFG) || \
((FLAG) == SAI_FLAG_FREQ) || \
((FLAG) == SAI_FLAG_CNRDY) || \
((FLAG) == SAI_FLAG_AFSDET) || \
((FLAG) == SAI_FLAG_LFSDET))
#define IS_SAI_BLOCK_CLEAR_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
((FLAG) == SAI_FLAG_MUTEDET) || \
((FLAG) == SAI_FLAG_WCKCFG) || \
((FLAG) == SAI_FLAG_FREQ) || \
((FLAG) == SAI_FLAG_CNRDY) || \
((FLAG) == SAI_FLAG_AFSDET) || \
((FLAG) == SAI_FLAG_LFSDET))
/**
* @}
*/
/** @defgroup SAI_Block_Fifo_Status_Level
* @{
*/
#define SAI_FIFOStatus_Empty ((uint32_t)0x00000000)
#define SAI_FIFOStatus_Less1QuarterFull ((uint32_t)0x00010000)
#define SAI_FIFOStatus_1QuarterFull ((uint32_t)0x00020000)
#define SAI_FIFOStatus_HalfFull ((uint32_t)0x00030000)
#define SAI_FIFOStatus_3QuartersFull ((uint32_t)0x00040000)
#define SAI_FIFOStatus_Full ((uint32_t)0x00050000)
#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOStatus_Less1QuarterFull ) || \
((STATUS) == SAI_FIFOStatus_HalfFull) || \
((STATUS) == SAI_FIFOStatus_1QuarterFull) || \
((STATUS) == SAI_FIFOStatus_3QuartersFull) || \
((STATUS) == SAI_FIFOStatus_Full) || \
((STATUS) == SAI_FIFOStatus_Empty))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the SAI configuration to the default reset state *****/
void SAI_DeInit(SAI_TypeDef* SAIx);
/* Initialization and Configuration functions *********************************/
void SAI_Init(SAI_Block_TypeDef* SAI_Block_x, SAI_InitTypeDef* SAI_InitStruct);
void SAI_FrameInit(SAI_Block_TypeDef* SAI_Block_x, SAI_FrameInitTypeDef* SAI_FrameInitStruct);
void SAI_SlotInit(SAI_Block_TypeDef* SAI_Block_x, SAI_SlotInitTypeDef* SAI_SlotInitStruct);
void SAI_StructInit(SAI_InitTypeDef* SAI_InitStruct);
void SAI_FrameStructInit(SAI_FrameInitTypeDef* SAI_FrameInitStruct);
void SAI_SlotStructInit(SAI_SlotInitTypeDef* SAI_SlotInitStruct);
void SAI_Cmd(SAI_Block_TypeDef* SAI_Block_x, FunctionalState NewState);
void SAI_MonoModeConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_Mono_StreoMode);
void SAI_TRIStateConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_TRIState);
void SAI_CompandingModeConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_CompandingMode);
void SAI_MuteModeCmd(SAI_Block_TypeDef* SAI_Block_x, FunctionalState NewState);
void SAI_MuteValueConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_MuteValue);
void SAI_MuteFrameCounterConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_MuteCounter);
void SAI_FlushFIFO(SAI_Block_TypeDef* SAI_Block_x);
/* Data transfers functions ***************************************************/
void SAI_SendData(SAI_Block_TypeDef* SAI_Block_x, uint32_t Data);
uint32_t SAI_ReceiveData(SAI_Block_TypeDef* SAI_Block_x);
/* DMA transfers management functions *****************************************/
void SAI_DMACmd(SAI_Block_TypeDef* SAI_Block_x, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void SAI_ITConfig(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_IT, FunctionalState NewState);
FlagStatus SAI_GetFlagStatus(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_FLAG);
void SAI_ClearFlag(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_FLAG);
ITStatus SAI_GetITStatus(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_IT);
void SAI_ClearITPendingBit(SAI_Block_TypeDef* SAI_Block_x, uint32_t SAI_IT);
FunctionalState SAI_GetCmdStatus(SAI_Block_TypeDef* SAI_Block_x);
uint32_t SAI_GetFIFOStatus(SAI_Block_TypeDef* SAI_Block_x);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_SAI_H */
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

536
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_sdio.h Normal file
View file

@ -0,0 +1,536 @@
/**
******************************************************************************
* @file stm32f4xx_sdio.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the SDIO firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SDIO_H
#define __STM32F4xx_SDIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SDIO
* @{
*/
/* Exported types ------------------------------------------------------------*/
typedef struct
{
uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref SDIO_Clock_Edge */
uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
enabled or disabled.
This parameter can be a value of @ref SDIO_Clock_Bypass */
uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
disabled when the bus is idle.
This parameter can be a value of @ref SDIO_Clock_Power_Save */
uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.
This parameter can be a value of @ref SDIO_Bus_Wide */
uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
This parameter can be a value between 0x00 and 0xFF. */
} SDIO_InitTypeDef;
typedef struct
{
uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent
to a card as part of a command message. If a command
contains an argument, it must be loaded into this register
before writing the command to the command register */
uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */
uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
This parameter can be a value of @ref SDIO_Response_Type */
uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait for interrupt request is enabled or disabled.
This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
is enabled or disabled.
This parameter can be a value of @ref SDIO_CPSM_State */
} SDIO_CmdInitTypeDef;
typedef struct
{
uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */
uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.
This parameter can be a value of @ref SDIO_Data_Block_Size */
uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer
is a read or write.
This parameter can be a value of @ref SDIO_Transfer_Direction */
uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
This parameter can be a value of @ref SDIO_Transfer_Type */
uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
is enabled or disabled.
This parameter can be a value of @ref SDIO_DPSM_State */
} SDIO_DataInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup SDIO_Exported_Constants
* @{
*/
/** @defgroup SDIO_Clock_Edge
* @{
*/
#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)
#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)
#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
((EDGE) == SDIO_ClockEdge_Falling))
/**
* @}
*/
/** @defgroup SDIO_Clock_Bypass
* @{
*/
#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)
#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400)
#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
((BYPASS) == SDIO_ClockBypass_Enable))
/**
* @}
*/
/** @defgroup SDIO_Clock_Power_Save
* @{
*/
#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)
#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)
#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
((SAVE) == SDIO_ClockPowerSave_Enable))
/**
* @}
*/
/** @defgroup SDIO_Bus_Wide
* @{
*/
#define SDIO_BusWide_1b ((uint32_t)0x00000000)
#define SDIO_BusWide_4b ((uint32_t)0x00000800)
#define SDIO_BusWide_8b ((uint32_t)0x00001000)
#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
((WIDE) == SDIO_BusWide_8b))
/**
* @}
*/
/** @defgroup SDIO_Hardware_Flow_Control
* @{
*/
#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)
#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)
#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
((CONTROL) == SDIO_HardwareFlowControl_Enable))
/**
* @}
*/
/** @defgroup SDIO_Power_State
* @{
*/
#define SDIO_PowerState_OFF ((uint32_t)0x00000000)
#define SDIO_PowerState_ON ((uint32_t)0x00000003)
#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON))
/**
* @}
*/
/** @defgroup SDIO_Interrupt_sources
* @{
*/
#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)
#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)
#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)
#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)
#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)
#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)
#define SDIO_IT_CMDREND ((uint32_t)0x00000040)
#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)
#define SDIO_IT_DATAEND ((uint32_t)0x00000100)
#define SDIO_IT_STBITERR ((uint32_t)0x00000200)
#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)
#define SDIO_IT_CMDACT ((uint32_t)0x00000800)
#define SDIO_IT_TXACT ((uint32_t)0x00001000)
#define SDIO_IT_RXACT ((uint32_t)0x00002000)
#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)
#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)
#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)
#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)
#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)
#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)
#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)
#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)
#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)
#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)
#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
/**
* @}
*/
/** @defgroup SDIO_Command_Index
* @{
*/
#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
/**
* @}
*/
/** @defgroup SDIO_Response_Type
* @{
*/
#define SDIO_Response_No ((uint32_t)0x00000000)
#define SDIO_Response_Short ((uint32_t)0x00000040)
#define SDIO_Response_Long ((uint32_t)0x000000C0)
#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
((RESPONSE) == SDIO_Response_Short) || \
((RESPONSE) == SDIO_Response_Long))
/**
* @}
*/
/** @defgroup SDIO_Wait_Interrupt_State
* @{
*/
#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
((WAIT) == SDIO_Wait_Pend))
/**
* @}
*/
/** @defgroup SDIO_CPSM_State
* @{
*/
#define SDIO_CPSM_Disable ((uint32_t)0x00000000)
#define SDIO_CPSM_Enable ((uint32_t)0x00000400)
#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
/**
* @}
*/
/** @defgroup SDIO_Response_Registers
* @{
*/
#define SDIO_RESP1 ((uint32_t)0x00000000)
#define SDIO_RESP2 ((uint32_t)0x00000004)
#define SDIO_RESP3 ((uint32_t)0x00000008)
#define SDIO_RESP4 ((uint32_t)0x0000000C)
#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
/**
* @}
*/
/** @defgroup SDIO_Data_Length
* @{
*/
#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
/**
* @}
*/
/** @defgroup SDIO_Data_Block_Size
* @{
*/
#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)
#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)
#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)
#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)
#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)
#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)
#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)
#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)
#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)
#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)
#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)
#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)
#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)
#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)
#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)
#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
((SIZE) == SDIO_DataBlockSize_2b) || \
((SIZE) == SDIO_DataBlockSize_4b) || \
((SIZE) == SDIO_DataBlockSize_8b) || \
((SIZE) == SDIO_DataBlockSize_16b) || \
((SIZE) == SDIO_DataBlockSize_32b) || \
((SIZE) == SDIO_DataBlockSize_64b) || \
((SIZE) == SDIO_DataBlockSize_128b) || \
((SIZE) == SDIO_DataBlockSize_256b) || \
((SIZE) == SDIO_DataBlockSize_512b) || \
((SIZE) == SDIO_DataBlockSize_1024b) || \
((SIZE) == SDIO_DataBlockSize_2048b) || \
((SIZE) == SDIO_DataBlockSize_4096b) || \
((SIZE) == SDIO_DataBlockSize_8192b) || \
((SIZE) == SDIO_DataBlockSize_16384b))
/**
* @}
*/
/** @defgroup SDIO_Transfer_Direction
* @{
*/
#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)
#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)
#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
((DIR) == SDIO_TransferDir_ToSDIO))
/**
* @}
*/
/** @defgroup SDIO_Transfer_Type
* @{
*/
#define SDIO_TransferMode_Block ((uint32_t)0x00000000)
#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)
#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
((MODE) == SDIO_TransferMode_Block))
/**
* @}
*/
/** @defgroup SDIO_DPSM_State
* @{
*/
#define SDIO_DPSM_Disable ((uint32_t)0x00000000)
#define SDIO_DPSM_Enable ((uint32_t)0x00000001)
#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
/**
* @}
*/
/** @defgroup SDIO_Flags
* @{
*/
#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)
#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)
#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)
#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)
#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)
#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)
#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)
#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)
#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)
#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)
#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)
#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)
#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)
#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)
#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)
#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)
#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)
#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)
#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)
#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)
#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)
#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)
#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)
#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)
#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
((FLAG) == SDIO_FLAG_DCRCFAIL) || \
((FLAG) == SDIO_FLAG_CTIMEOUT) || \
((FLAG) == SDIO_FLAG_DTIMEOUT) || \
((FLAG) == SDIO_FLAG_TXUNDERR) || \
((FLAG) == SDIO_FLAG_RXOVERR) || \
((FLAG) == SDIO_FLAG_CMDREND) || \
((FLAG) == SDIO_FLAG_CMDSENT) || \
((FLAG) == SDIO_FLAG_DATAEND) || \
((FLAG) == SDIO_FLAG_STBITERR) || \
((FLAG) == SDIO_FLAG_DBCKEND) || \
((FLAG) == SDIO_FLAG_CMDACT) || \
((FLAG) == SDIO_FLAG_TXACT) || \
((FLAG) == SDIO_FLAG_RXACT) || \
((FLAG) == SDIO_FLAG_TXFIFOHE) || \
((FLAG) == SDIO_FLAG_RXFIFOHF) || \
((FLAG) == SDIO_FLAG_TXFIFOF) || \
((FLAG) == SDIO_FLAG_RXFIFOF) || \
((FLAG) == SDIO_FLAG_TXFIFOE) || \
((FLAG) == SDIO_FLAG_RXFIFOE) || \
((FLAG) == SDIO_FLAG_TXDAVL) || \
((FLAG) == SDIO_FLAG_RXDAVL) || \
((FLAG) == SDIO_FLAG_SDIOIT) || \
((FLAG) == SDIO_FLAG_CEATAEND))
#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
((IT) == SDIO_IT_DCRCFAIL) || \
((IT) == SDIO_IT_CTIMEOUT) || \
((IT) == SDIO_IT_DTIMEOUT) || \
((IT) == SDIO_IT_TXUNDERR) || \
((IT) == SDIO_IT_RXOVERR) || \
((IT) == SDIO_IT_CMDREND) || \
((IT) == SDIO_IT_CMDSENT) || \
((IT) == SDIO_IT_DATAEND) || \
((IT) == SDIO_IT_STBITERR) || \
((IT) == SDIO_IT_DBCKEND) || \
((IT) == SDIO_IT_CMDACT) || \
((IT) == SDIO_IT_TXACT) || \
((IT) == SDIO_IT_RXACT) || \
((IT) == SDIO_IT_TXFIFOHE) || \
((IT) == SDIO_IT_RXFIFOHF) || \
((IT) == SDIO_IT_TXFIFOF) || \
((IT) == SDIO_IT_RXFIFOF) || \
((IT) == SDIO_IT_TXFIFOE) || \
((IT) == SDIO_IT_RXFIFOE) || \
((IT) == SDIO_IT_TXDAVL) || \
((IT) == SDIO_IT_RXDAVL) || \
((IT) == SDIO_IT_SDIOIT) || \
((IT) == SDIO_IT_CEATAEND))
#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
/**
* @}
*/
/** @defgroup SDIO_Read_Wait_Mode
* @{
*/
#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
((MODE) == SDIO_ReadWaitMode_DATA2))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the SDIO configuration to the default reset state ****/
void SDIO_DeInit(void);
/* Initialization and Configuration functions *********************************/
void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
void SDIO_ClockCmd(FunctionalState NewState);
void SDIO_SetPowerState(uint32_t SDIO_PowerState);
uint32_t SDIO_GetPowerState(void);
/* Command path state machine (CPSM) management functions *********************/
void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
uint8_t SDIO_GetCommandResponse(void);
uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
/* Data path state machine (DPSM) management functions ************************/
void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
uint32_t SDIO_GetDataCounter(void);
uint32_t SDIO_ReadData(void);
void SDIO_WriteData(uint32_t Data);
uint32_t SDIO_GetFIFOCount(void);
/* SDIO IO Cards mode management functions ************************************/
void SDIO_StartSDIOReadWait(FunctionalState NewState);
void SDIO_StopSDIOReadWait(FunctionalState NewState);
void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
void SDIO_SetSDIOOperation(FunctionalState NewState);
void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
/* CE-ATA mode management functions *******************************************/
void SDIO_CommandCompletionCmd(FunctionalState NewState);
void SDIO_CEATAITCmd(FunctionalState NewState);
void SDIO_SendCEATACmd(FunctionalState NewState);
/* DMA transfers management functions *****************************************/
void SDIO_DMACmd(FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
void SDIO_ClearFlag(uint32_t SDIO_FLAG);
ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_SDIO_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

262
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_spdifrx.h Normal file
View file

@ -0,0 +1,262 @@
/**
******************************************************************************
* @file stm32f4xx_spdifrx.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the SPDIFRX firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SPDIFRX_H
#define __STM32F4xx_SPDIFRX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SPDIFRX
* @{
*/
#if defined(STM32F446xx)
/* Exported types ------------------------------------------------------------*/
/**
* @brief SPDIFRX Init structure definition
*/
typedef struct
{
uint32_t SPDIFRX_InputSelection; /*!< Specifies the SPDIFRX input selection.
This parameter can be a value of @ref SPDIFRX_Input_Selection */
uint32_t SPDIFRX_Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
This parameter can be a value of @ref SPDIFRX_Max_Retries */
uint32_t SPDIFRX_WaitForActivity; /*!< Specifies the wait for activity on SPDIFRX selected input.
This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
uint32_t SPDIFRX_ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
This parameter can be a value of @ref SPDIFRX_Channel_Selection */
uint32_t SPDIFRX_DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
This parameter can be a value of @ref SPDIFRX_Data_Format */
uint32_t SPDIFRX_StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
}SPDIFRX_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup SPDIFRX_Exported_Constants
* @{
*/
#define IS_SPDIFRX_PERIPH(PERIPH) (((PERIPH) == SPDIFRX))
/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
* @{
*/
#define SPDIFRX_Input_IN0 ((uint32_t)0x00000000)
#define SPDIFRX_Input_IN1 ((uint32_t)0x00010000)
#define SPDIFRX_Input_IN2 ((uint32_t)0x00020000)
#define SPDIFRX_Input_IN3 ((uint32_t)0x00030000)
#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_Input_IN1) || \
((INPUT) == SPDIFRX_Input_IN2) || \
((INPUT) == SPDIFRX_Input_IN3) || \
((INPUT) == SPDIFRX_Input_IN0))
/**
* @}
*/
/** @defgroup SPDIFRX_Max_Retries SPDIFRX Max Retries
* @{
*/
#define SPDIFRX_1MAX_RETRIES ((uint32_t)0x00000000)
#define SPDIFRX_4MAX_RETRIES ((uint32_t)0x00001000)
#define SPDIFRX_16MAX_RETRIES ((uint32_t)0x00002000)
#define SPDIFRX_64MAX_RETRIES ((uint32_t)0x00003000)
#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_1MAX_RETRIES) || \
((RET) == SPDIFRX_4MAX_RETRIES) || \
((RET) == SPDIFRX_16MAX_RETRIES) || \
((RET) == SPDIFRX_64MAX_RETRIES))
/**
* @}
*/
/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
* @{
*/
#define SPDIFRX_WaitForActivity_Off ((uint32_t)0x00000000)
#define SPDIFRX_WaitForActivity_On ((uint32_t)SPDIFRX_CR_WFA)
#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WaitForActivity_On) || \
((VAL) == SPDIFRX_WaitForActivity_Off))
/**
* @}
*/
/** @defgroup SPDIFRX_ChannelSelection SPDIFRX Channel Selection
* @{
*/
#define SPDIFRX_Select_Channel_A ((uint32_t)0x00000000)
#define SPDIFRX_Select_Channel_B ((uint32_t)SPDIFRX_CR_CHSEL)
#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_Select_Channel_A) || \
((CHANNEL) == SPDIFRX_Select_Channel_B))
/**
* @}
*/
/** @defgroup SPDIFRX_Block_Synchronization SPDIFRX Block Synchronization
* @{
*/
#define SPDIFRX_LSB_DataFormat ((uint32_t)0x00000000)
#define SPDIFRX_MSB_DataFormat ((uint32_t)0x00000010)
#define SPDIFRX_32BITS_DataFormat ((uint32_t)0x00000020)
#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_LSB_DataFormat) || \
((FORMAT) == SPDIFRX_MSB_DataFormat) || \
((FORMAT) == SPDIFRX_32BITS_DataFormat))
/**
* @}
*/
/** @defgroup SPDIFRX_StereoMode SPDIFRX StereoMode
* @{
*/
#define SPDIFRX_StereoMode_Disabled ((uint32_t)0x00000000)
#define SPDIFRX_StereoMode_Enabled ((uint32_t)SPDIFRX_CR_RXSTEO)
#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_StereoMode_Disabled) || \
((MODE) == SPDIFRX_StereoMode_Enabled))
/**
* @}
*/
/** @defgroup SPDIFRX_State SPDIFRX State
* @{
*/
#define SPDIFRX_STATE_IDLE ((uint32_t)0x00000000)
#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001)
#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
#define IS_SPDIFRX_STATE(STATE) (((STATE) == SPDIFRX_STATE_IDLE) || \
((STATE) == SPDIFRX_STATE_SYNC) || \
((STATE) == SPDIFRX_STATE_RCV))
/**
* @}
*/
/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
* @{
*/
#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
#define IS_SPDIFRX_CONFIG_IT(IT) (((IT) == SPDIFRX_IT_RXNE) || \
((IT) == SPDIFRX_IT_CSRNE) || \
((IT) == SPDIFRX_IT_PERRIE) || \
((IT) == SPDIFRX_IT_OVRIE) || \
((IT) == SPDIFRX_IT_SBLKIE) || \
((IT) == SPDIFRX_IT_SYNCDIE) || \
((IT) == SPDIFRX_IT_IFEIE))
/**
* @}
*/
/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
* @{
*/
#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
#define IS_SPDIFRX_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_RXNE) || ((FLAG) == SPDIFRX_FLAG_CSRNE) || \
((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \
((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD) || \
((FLAG) == SPDIFRX_SR_FERR) || ((FLAG) == SPDIFRX_SR_SERR) || \
((FLAG) == SPDIFRX_SR_TERR))
#define IS_SPDIFRX_CLEAR_FLAG(FLAG) (((FLAG) == SPDIFRX_FLAG_PERR) || ((FLAG) == SPDIFRX_FLAG_OVR) || \
((FLAG) == SPDIFRX_SR_SBD) || ((FLAG) == SPDIFRX_SR_SYNCD))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the SPDIFRX configuration to the default reset state *****/
void SPDIFRX_DeInit(void);
/* Initialization and Configuration functions *********************************/
void SPDIFRX_Init(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct);
void SPDIFRX_StructInit(SPDIFRX_InitTypeDef* SPDIFRX_InitStruct);
void SPDIFRX_Cmd(uint32_t SPDIFRX_State);
void SPDIFRX_SetPreambleTypeBit(FunctionalState NewState);
void SPDIFRX_SetUserDataChannelStatusBits(FunctionalState NewState);
void SPDIFRX_SetValidityBit(FunctionalState NewState);
void SPDIFRX_SetParityBit(FunctionalState NewState);
/* Data transfers functions ***************************************************/
uint32_t SPDIFRX_ReceiveData(void);
/* DMA transfers management functions *****************************************/
void SPDIFRX_RxDMACmd(FunctionalState NewState);
void SPDIFRX_CbDMACmd(FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void SPDIFRX_ITConfig(uint32_t SPDIFRX_IT, FunctionalState NewState);
FlagStatus SPDIFRX_GetFlagStatus(uint32_t SPDIFRX_FLAG);
void SPDIFRX_ClearFlag(uint32_t SPDIFRX_FLAG);
ITStatus SPDIFRX_GetITStatus(uint32_t SPDIFRX_IT);
void SPDIFRX_ClearITPendingBit(uint32_t SPDIFRX_IT);
#endif /* STM32F446xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_SPDIFRX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

549
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_spi.h Normal file
View file

@ -0,0 +1,549 @@
/**
******************************************************************************
* @file stm32f4xx_spi.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the SPI
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SPI_H
#define __STM32F4xx_SPI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SPI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief SPI Init structure definition
*/
typedef struct
{
uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode.
This parameter can be a value of @ref SPI_data_direction */
uint16_t SPI_Mode; /*!< Specifies the SPI operating mode.
This parameter can be a value of @ref SPI_mode */
uint16_t SPI_DataSize; /*!< Specifies the SPI data size.
This parameter can be a value of @ref SPI_data_size */
uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state.
This parameter can be a value of @ref SPI_Clock_Polarity */
uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture.
This parameter can be a value of @ref SPI_Clock_Phase */
uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by
hardware (NSS pin) or by software using the SSI bit.
This parameter can be a value of @ref SPI_Slave_Select_management */
uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
used to configure the transmit and receive SCK clock.
This parameter can be a value of @ref SPI_BaudRate_Prescaler
@note The communication clock is derived from the master
clock. The slave clock does not need to be set. */
uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */
}SPI_InitTypeDef;
/**
* @brief I2S Init structure definition
*/
typedef struct
{
uint16_t I2S_Mode; /*!< Specifies the I2S operating mode.
This parameter can be a value of @ref I2S_Mode */
uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication.
This parameter can be a value of @ref I2S_Standard */
uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication.
This parameter can be a value of @ref I2S_Data_Format */
uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
This parameter can be a value of @ref I2S_MCLK_Output */
uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
This parameter can be a value of @ref I2S_Audio_Frequency */
uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock.
This parameter can be a value of @ref I2S_Clock_Polarity */
}I2S_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup SPI_Exported_Constants
* @{
*/
#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == SPI4) || \
((PERIPH) == SPI5) || \
((PERIPH) == SPI6))
#define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \
((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == SPI4) || \
((PERIPH) == SPI5) || \
((PERIPH) == SPI6) || \
((PERIPH) == I2S2ext) || \
((PERIPH) == I2S3ext))
#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
((PERIPH) == SPI3))
#define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == I2S2ext) || \
((PERIPH) == I2S3ext))
#define IS_I2S_EXT_PERIPH(PERIPH) (((PERIPH) == I2S2ext) || \
((PERIPH) == I2S3ext))
/** @defgroup SPI_data_direction
* @{
*/
#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
((MODE) == SPI_Direction_2Lines_RxOnly) || \
((MODE) == SPI_Direction_1Line_Rx) || \
((MODE) == SPI_Direction_1Line_Tx))
/**
* @}
*/
/** @defgroup SPI_mode
* @{
*/
#define SPI_Mode_Master ((uint16_t)0x0104)
#define SPI_Mode_Slave ((uint16_t)0x0000)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
((MODE) == SPI_Mode_Slave))
/**
* @}
*/
/** @defgroup SPI_data_size
* @{
*/
#define SPI_DataSize_16b ((uint16_t)0x0800)
#define SPI_DataSize_8b ((uint16_t)0x0000)
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
((DATASIZE) == SPI_DataSize_8b))
/**
* @}
*/
/** @defgroup SPI_Clock_Polarity
* @{
*/
#define SPI_CPOL_Low ((uint16_t)0x0000)
#define SPI_CPOL_High ((uint16_t)0x0002)
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
((CPOL) == SPI_CPOL_High))
/**
* @}
*/
/** @defgroup SPI_Clock_Phase
* @{
*/
#define SPI_CPHA_1Edge ((uint16_t)0x0000)
#define SPI_CPHA_2Edge ((uint16_t)0x0001)
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
((CPHA) == SPI_CPHA_2Edge))
/**
* @}
*/
/** @defgroup SPI_Slave_Select_management
* @{
*/
#define SPI_NSS_Soft ((uint16_t)0x0200)
#define SPI_NSS_Hard ((uint16_t)0x0000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
((NSS) == SPI_NSS_Hard))
/**
* @}
*/
/** @defgroup SPI_BaudRate_Prescaler
* @{
*/
#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
((PRESCALER) == SPI_BaudRatePrescaler_4) || \
((PRESCALER) == SPI_BaudRatePrescaler_8) || \
((PRESCALER) == SPI_BaudRatePrescaler_16) || \
((PRESCALER) == SPI_BaudRatePrescaler_32) || \
((PRESCALER) == SPI_BaudRatePrescaler_64) || \
((PRESCALER) == SPI_BaudRatePrescaler_128) || \
((PRESCALER) == SPI_BaudRatePrescaler_256))
/**
* @}
*/
/** @defgroup SPI_MSB_LSB_transmission
* @{
*/
#define SPI_FirstBit_MSB ((uint16_t)0x0000)
#define SPI_FirstBit_LSB ((uint16_t)0x0080)
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
((BIT) == SPI_FirstBit_LSB))
/**
* @}
*/
/** @defgroup SPI_I2S_Mode
* @{
*/
#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
#define I2S_Mode_MasterTx ((uint16_t)0x0200)
#define I2S_Mode_MasterRx ((uint16_t)0x0300)
#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
((MODE) == I2S_Mode_SlaveRx) || \
((MODE) == I2S_Mode_MasterTx)|| \
((MODE) == I2S_Mode_MasterRx))
/**
* @}
*/
/** @defgroup SPI_I2S_Standard
* @{
*/
#define I2S_Standard_Phillips ((uint16_t)0x0000)
#define I2S_Standard_MSB ((uint16_t)0x0010)
#define I2S_Standard_LSB ((uint16_t)0x0020)
#define I2S_Standard_PCMShort ((uint16_t)0x0030)
#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
((STANDARD) == I2S_Standard_MSB) || \
((STANDARD) == I2S_Standard_LSB) || \
((STANDARD) == I2S_Standard_PCMShort) || \
((STANDARD) == I2S_Standard_PCMLong))
/**
* @}
*/
/** @defgroup SPI_I2S_Data_Format
* @{
*/
#define I2S_DataFormat_16b ((uint16_t)0x0000)
#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
#define I2S_DataFormat_24b ((uint16_t)0x0003)
#define I2S_DataFormat_32b ((uint16_t)0x0005)
#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
((FORMAT) == I2S_DataFormat_16bextended) || \
((FORMAT) == I2S_DataFormat_24b) || \
((FORMAT) == I2S_DataFormat_32b))
/**
* @}
*/
/** @defgroup SPI_I2S_MCLK_Output
* @{
*/
#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
((OUTPUT) == I2S_MCLKOutput_Disable))
/**
* @}
*/
/** @defgroup SPI_I2S_Audio_Frequency
* @{
*/
#define I2S_AudioFreq_192k ((uint32_t)192000)
#define I2S_AudioFreq_96k ((uint32_t)96000)
#define I2S_AudioFreq_48k ((uint32_t)48000)
#define I2S_AudioFreq_44k ((uint32_t)44100)
#define I2S_AudioFreq_32k ((uint32_t)32000)
#define I2S_AudioFreq_22k ((uint32_t)22050)
#define I2S_AudioFreq_16k ((uint32_t)16000)
#define I2S_AudioFreq_11k ((uint32_t)11025)
#define I2S_AudioFreq_8k ((uint32_t)8000)
#define I2S_AudioFreq_Default ((uint32_t)2)
#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
((FREQ) <= I2S_AudioFreq_192k)) || \
((FREQ) == I2S_AudioFreq_Default))
/**
* @}
*/
/** @defgroup SPI_I2S_Clock_Polarity
* @{
*/
#define I2S_CPOL_Low ((uint16_t)0x0000)
#define I2S_CPOL_High ((uint16_t)0x0008)
#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
((CPOL) == I2S_CPOL_High))
/**
* @}
*/
/** @defgroup SPI_I2S_DMA_transfer_requests
* @{
*/
#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
/**
* @}
*/
/** @defgroup SPI_NSS_internal_software_management
* @{
*/
#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
((INTERNAL) == SPI_NSSInternalSoft_Reset))
/**
* @}
*/
/** @defgroup SPI_CRC_Transmit_Receive
* @{
*/
#define SPI_CRC_Tx ((uint8_t)0x00)
#define SPI_CRC_Rx ((uint8_t)0x01)
#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
/**
* @}
*/
/** @defgroup SPI_direction_transmit_receive
* @{
*/
#define SPI_Direction_Rx ((uint16_t)0xBFFF)
#define SPI_Direction_Tx ((uint16_t)0x4000)
#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
((DIRECTION) == SPI_Direction_Tx))
/**
* @}
*/
/** @defgroup SPI_I2S_interrupts_definition
* @{
*/
#define SPI_I2S_IT_TXE ((uint8_t)0x71)
#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
#define SPI_I2S_IT_ERR ((uint8_t)0x50)
#define I2S_IT_UDR ((uint8_t)0x53)
#define SPI_I2S_IT_TIFRFE ((uint8_t)0x58)
#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
((IT) == SPI_I2S_IT_RXNE) || \
((IT) == SPI_I2S_IT_ERR))
#define SPI_I2S_IT_OVR ((uint8_t)0x56)
#define SPI_IT_MODF ((uint8_t)0x55)
#define SPI_IT_CRCERR ((uint8_t)0x54)
#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE)|| ((IT) == SPI_I2S_IT_TXE) || \
((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \
((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\
((IT) == SPI_I2S_IT_TIFRFE))
/**
* @}
*/
/** @defgroup SPI_I2S_flags_definition
* @{
*/
#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
#define I2S_FLAG_UDR ((uint16_t)0x0008)
#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
#define SPI_FLAG_MODF ((uint16_t)0x0020)
#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
#define SPI_I2S_FLAG_TIFRFE ((uint16_t)0x0100)
#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \
((FLAG) == SPI_I2S_FLAG_TIFRFE))
/**
* @}
*/
/** @defgroup SPI_CRC_polynomial
* @{
*/
#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
/**
* @}
*/
/** @defgroup SPI_I2S_Legacy
* @{
*/
#define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx
#define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx
#define SPI_IT_TXE SPI_I2S_IT_TXE
#define SPI_IT_RXNE SPI_I2S_IT_RXNE
#define SPI_IT_ERR SPI_I2S_IT_ERR
#define SPI_IT_OVR SPI_I2S_IT_OVR
#define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE
#define SPI_FLAG_TXE SPI_I2S_FLAG_TXE
#define SPI_FLAG_OVR SPI_I2S_FLAG_OVR
#define SPI_FLAG_BSY SPI_I2S_FLAG_BSY
#define SPI_DeInit SPI_I2S_DeInit
#define SPI_ITConfig SPI_I2S_ITConfig
#define SPI_DMACmd SPI_I2S_DMACmd
#define SPI_SendData SPI_I2S_SendData
#define SPI_ReceiveData SPI_I2S_ReceiveData
#define SPI_GetFlagStatus SPI_I2S_GetFlagStatus
#define SPI_ClearFlag SPI_I2S_ClearFlag
#define SPI_GetITStatus SPI_I2S_GetITStatus
#define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the SPI configuration to the default reset state *****/
void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
/* Initialization and Configuration functions *********************************/
void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
void SPI_TIModeCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
void I2S_FullDuplexConfig(SPI_TypeDef* I2Sxext, I2S_InitTypeDef* I2S_InitStruct);
/* Data transfers functions ***************************************************/
void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
/* Hardware CRC Calculation functions *****************************************/
void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
void SPI_TransmitCRC(SPI_TypeDef* SPIx);
uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
/* DMA transfers management functions *****************************************/
void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_SPI_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

222
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_syscfg.h Normal file
View file

@ -0,0 +1,222 @@
/**
******************************************************************************
* @file stm32f4xx_syscfg.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the SYSCFG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_SYSCFG_H
#define __STM32F4xx_SYSCFG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup SYSCFG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSCFG_Exported_Constants
* @{
*/
/** @defgroup SYSCFG_EXTI_Port_Sources
* @{
*/
#define EXTI_PortSourceGPIOA ((uint8_t)0x00)
#define EXTI_PortSourceGPIOB ((uint8_t)0x01)
#define EXTI_PortSourceGPIOC ((uint8_t)0x02)
#define EXTI_PortSourceGPIOD ((uint8_t)0x03)
#define EXTI_PortSourceGPIOE ((uint8_t)0x04)
#define EXTI_PortSourceGPIOF ((uint8_t)0x05)
#define EXTI_PortSourceGPIOG ((uint8_t)0x06)
#define EXTI_PortSourceGPIOH ((uint8_t)0x07)
#define EXTI_PortSourceGPIOI ((uint8_t)0x08)
#define EXTI_PortSourceGPIOJ ((uint8_t)0x09)
#define EXTI_PortSourceGPIOK ((uint8_t)0x0A)
#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \
((PORTSOURCE) == EXTI_PortSourceGPIOB) || \
((PORTSOURCE) == EXTI_PortSourceGPIOC) || \
((PORTSOURCE) == EXTI_PortSourceGPIOD) || \
((PORTSOURCE) == EXTI_PortSourceGPIOE) || \
((PORTSOURCE) == EXTI_PortSourceGPIOF) || \
((PORTSOURCE) == EXTI_PortSourceGPIOG) || \
((PORTSOURCE) == EXTI_PortSourceGPIOH) || \
((PORTSOURCE) == EXTI_PortSourceGPIOI) || \
((PORTSOURCE) == EXTI_PortSourceGPIOJ) || \
((PORTSOURCE) == EXTI_PortSourceGPIOK))
/**
* @}
*/
/** @defgroup SYSCFG_EXTI_Pin_Sources
* @{
*/
#define EXTI_PinSource0 ((uint8_t)0x00)
#define EXTI_PinSource1 ((uint8_t)0x01)
#define EXTI_PinSource2 ((uint8_t)0x02)
#define EXTI_PinSource3 ((uint8_t)0x03)
#define EXTI_PinSource4 ((uint8_t)0x04)
#define EXTI_PinSource5 ((uint8_t)0x05)
#define EXTI_PinSource6 ((uint8_t)0x06)
#define EXTI_PinSource7 ((uint8_t)0x07)
#define EXTI_PinSource8 ((uint8_t)0x08)
#define EXTI_PinSource9 ((uint8_t)0x09)
#define EXTI_PinSource10 ((uint8_t)0x0A)
#define EXTI_PinSource11 ((uint8_t)0x0B)
#define EXTI_PinSource12 ((uint8_t)0x0C)
#define EXTI_PinSource13 ((uint8_t)0x0D)
#define EXTI_PinSource14 ((uint8_t)0x0E)
#define EXTI_PinSource15 ((uint8_t)0x0F)
#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0) || \
((PINSOURCE) == EXTI_PinSource1) || \
((PINSOURCE) == EXTI_PinSource2) || \
((PINSOURCE) == EXTI_PinSource3) || \
((PINSOURCE) == EXTI_PinSource4) || \
((PINSOURCE) == EXTI_PinSource5) || \
((PINSOURCE) == EXTI_PinSource6) || \
((PINSOURCE) == EXTI_PinSource7) || \
((PINSOURCE) == EXTI_PinSource8) || \
((PINSOURCE) == EXTI_PinSource9) || \
((PINSOURCE) == EXTI_PinSource10) || \
((PINSOURCE) == EXTI_PinSource11) || \
((PINSOURCE) == EXTI_PinSource12) || \
((PINSOURCE) == EXTI_PinSource13) || \
((PINSOURCE) == EXTI_PinSource14) || \
((PINSOURCE) == EXTI_PinSource15))
/**
* @}
*/
/** @defgroup SYSCFG_Memory_Remap_Config
* @{
*/
#define SYSCFG_MemoryRemap_Flash ((uint8_t)0x00)
#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01)
#define SYSCFG_MemoryRemap_SRAM ((uint8_t)0x03)
#define SYSCFG_MemoryRemap_SDRAM ((uint8_t)0x04)
#if defined (STM32F40_41xxx)
#define SYSCFG_MemoryRemap_FSMC ((uint8_t)0x02)
#endif /* STM32F40_41xxx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define SYSCFG_MemoryRemap_FMC ((uint8_t)0x02)
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined (STM32F446xx)
#define SYSCFG_MemoryRemap_ExtMEM ((uint8_t)0x02)
#endif /* STM32F446xx */
#if defined (STM32F40_41xxx)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM) || \
((REMAP) == SYSCFG_MemoryRemap_FSMC))
#endif /* STM32F40_41xxx */
#if defined (STM32F401xx) || defined (STM32F411xE)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM))
#endif /* STM32F401xx || STM32F411xE */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM) || \
((REMAP) == SYSCFG_MemoryRemap_SDRAM) || \
((REMAP) == SYSCFG_MemoryRemap_FMC))
#endif /* STM32F427_437xx || STM32F429_439xx */
#if defined (STM32F446xx)
#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash) || \
((REMAP) == SYSCFG_MemoryRemap_ExtMEM) || \
((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
((REMAP) == SYSCFG_MemoryRemap_SRAM) || \
((REMAP) == SYSCFG_MemoryRemap_SDRAM))
#endif /* STM32F446xx */
/**
* @}
*/
/** @defgroup SYSCFG_ETHERNET_Media_Interface
* @{
*/
#define SYSCFG_ETH_MediaInterface_MII ((uint32_t)0x00000000)
#define SYSCFG_ETH_MediaInterface_RMII ((uint32_t)0x00000001)
#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \
((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
void SYSCFG_DeInit(void);
void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap);
void SYSCFG_MemorySwappingBank(FunctionalState NewState);
void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex);
void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface);
void SYSCFG_CompensationCellCmd(FunctionalState NewState);
FlagStatus SYSCFG_GetCompensationCellStatus(void);
#ifdef __cplusplus
}
#endif
#endif /*__STM32F4xx_SYSCFG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1150
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_tim.h Normal file
View file

File diff suppressed because it is too large Load diff

431
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_usart.h Normal file
View file

@ -0,0 +1,431 @@
/**
******************************************************************************
* @file stm32f4xx_usart.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the USART
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_USART_H
#define __STM32F4xx_USART_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup USART
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief USART Init Structure definition
*/
typedef struct
{
uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
The baud rate is computed using the following formula:
- IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate)))
- FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USART_Word_Length */
uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_Stop_Bits */
uint16_t USART_Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_Parity
@note When parity is enabled, the computed parity is inserted
at the MSB position of the transmitted data (9th bit when
the word length is set to 9 data bits; 8th bit when the
word length is set to 8 data bits). */
uint16_t USART_Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_Mode */
uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
or disabled.
This parameter can be a value of @ref USART_Hardware_Flow_Control */
} USART_InitTypeDef;
/**
* @brief USART Clock Init Structure definition
*/
typedef struct
{
uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
This parameter can be a value of @ref USART_Clock */
uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_Clock_Polarity */
uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_Clock_Phase */
uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_Last_Bit */
} USART_ClockInitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup USART_Exported_Constants
* @{
*/
#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == UART4) || \
((PERIPH) == UART5) || \
((PERIPH) == USART6) || \
((PERIPH) == UART7) || \
((PERIPH) == UART8))
#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \
((PERIPH) == USART2) || \
((PERIPH) == USART3) || \
((PERIPH) == USART6))
/** @defgroup USART_Word_Length
* @{
*/
#define USART_WordLength_8b ((uint16_t)0x0000)
#define USART_WordLength_9b ((uint16_t)0x1000)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
((LENGTH) == USART_WordLength_9b))
/**
* @}
*/
/** @defgroup USART_Stop_Bits
* @{
*/
#define USART_StopBits_1 ((uint16_t)0x0000)
#define USART_StopBits_0_5 ((uint16_t)0x1000)
#define USART_StopBits_2 ((uint16_t)0x2000)
#define USART_StopBits_1_5 ((uint16_t)0x3000)
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
((STOPBITS) == USART_StopBits_0_5) || \
((STOPBITS) == USART_StopBits_2) || \
((STOPBITS) == USART_StopBits_1_5))
/**
* @}
*/
/** @defgroup USART_Parity
* @{
*/
#define USART_Parity_No ((uint16_t)0x0000)
#define USART_Parity_Even ((uint16_t)0x0400)
#define USART_Parity_Odd ((uint16_t)0x0600)
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
((PARITY) == USART_Parity_Even) || \
((PARITY) == USART_Parity_Odd))
/**
* @}
*/
/** @defgroup USART_Mode
* @{
*/
#define USART_Mode_Rx ((uint16_t)0x0004)
#define USART_Mode_Tx ((uint16_t)0x0008)
#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_Hardware_Flow_Control
* @{
*/
#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
(((CONTROL) == USART_HardwareFlowControl_None) || \
((CONTROL) == USART_HardwareFlowControl_RTS) || \
((CONTROL) == USART_HardwareFlowControl_CTS) || \
((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
/**
* @}
*/
/** @defgroup USART_Clock
* @{
*/
#define USART_Clock_Disable ((uint16_t)0x0000)
#define USART_Clock_Enable ((uint16_t)0x0800)
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
((CLOCK) == USART_Clock_Enable))
/**
* @}
*/
/** @defgroup USART_Clock_Polarity
* @{
*/
#define USART_CPOL_Low ((uint16_t)0x0000)
#define USART_CPOL_High ((uint16_t)0x0400)
#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
/**
* @}
*/
/** @defgroup USART_Clock_Phase
* @{
*/
#define USART_CPHA_1Edge ((uint16_t)0x0000)
#define USART_CPHA_2Edge ((uint16_t)0x0200)
#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
/**
* @}
*/
/** @defgroup USART_Last_Bit
* @{
*/
#define USART_LastBit_Disable ((uint16_t)0x0000)
#define USART_LastBit_Enable ((uint16_t)0x0100)
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
((LASTBIT) == USART_LastBit_Enable))
/**
* @}
*/
/** @defgroup USART_Interrupt_definition
* @{
*/
#define USART_IT_PE ((uint16_t)0x0028)
#define USART_IT_TXE ((uint16_t)0x0727)
#define USART_IT_TC ((uint16_t)0x0626)
#define USART_IT_RXNE ((uint16_t)0x0525)
#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
#define USART_IT_IDLE ((uint16_t)0x0424)
#define USART_IT_LBD ((uint16_t)0x0846)
#define USART_IT_CTS ((uint16_t)0x096A)
#define USART_IT_ERR ((uint16_t)0x0060)
#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
#define USART_IT_NE ((uint16_t)0x0260)
#define USART_IT_FE ((uint16_t)0x0160)
/** @defgroup USART_Legacy
* @{
*/
#define USART_IT_ORE USART_IT_ORE_ER
/**
* @}
*/
#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \
((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
/**
* @}
*/
/** @defgroup USART_DMA_Requests
* @{
*/
#define USART_DMAReq_Tx ((uint16_t)0x0080)
#define USART_DMAReq_Rx ((uint16_t)0x0040)
#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
/**
* @}
*/
/** @defgroup USART_WakeUp_methods
* @{
*/
#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
((WAKEUP) == USART_WakeUp_AddressMark))
/**
* @}
*/
/** @defgroup USART_LIN_Break_Detection_Length
* @{
*/
#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
(((LENGTH) == USART_LINBreakDetectLength_10b) || \
((LENGTH) == USART_LINBreakDetectLength_11b))
/**
* @}
*/
/** @defgroup USART_IrDA_Low_Power
* @{
*/
#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
#define USART_IrDAMode_Normal ((uint16_t)0x0000)
#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
((MODE) == USART_IrDAMode_Normal))
/**
* @}
*/
/** @defgroup USART_Flags
* @{
*/
#define USART_FLAG_CTS ((uint16_t)0x0200)
#define USART_FLAG_LBD ((uint16_t)0x0100)
#define USART_FLAG_TXE ((uint16_t)0x0080)
#define USART_FLAG_TC ((uint16_t)0x0040)
#define USART_FLAG_RXNE ((uint16_t)0x0020)
#define USART_FLAG_IDLE ((uint16_t)0x0010)
#define USART_FLAG_ORE ((uint16_t)0x0008)
#define USART_FLAG_NE ((uint16_t)0x0004)
#define USART_FLAG_FE ((uint16_t)0x0002)
#define USART_FLAG_PE ((uint16_t)0x0001)
#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001))
#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the USART configuration to the default reset state ***/
void USART_DeInit(USART_TypeDef* USARTx);
/* Initialization and Configuration functions *********************************/
void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Data transfers functions ***************************************************/
void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
/* Multi-Processor Communication functions ************************************/
void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* LIN mode functions *********************************************************/
void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SendBreak(USART_TypeDef* USARTx);
/* Half-duplex mode function **************************************************/
void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* Smartcard mode functions ***************************************************/
void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
/* IrDA mode functions ********************************************************/
void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
/* DMA transfers management functions *****************************************/
void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_USART_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

111
embeddedstm32f407/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_wwdg.h Normal file
View file

@ -0,0 +1,111 @@
/**
******************************************************************************
* @file stm32f4xx_wwdg.h
* @author MCD Application Team
* @version V1.5.1
* @date 22-May-2015
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_WWDG_H
#define __STM32F4xx_WWDG_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup WWDG
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup WWDG_Exported_Constants
* @{
*/
/** @defgroup WWDG_Prescaler
* @{
*/
#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
((PRESCALER) == WWDG_Prescaler_2) || \
((PRESCALER) == WWDG_Prescaler_4) || \
((PRESCALER) == WWDG_Prescaler_8))
#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* Function used to set the WWDG configuration to the default reset state ****/
void WWDG_DeInit(void);
/* Prescaler, Refresh window and Counter configuration functions **************/
void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
void WWDG_SetWindowValue(uint8_t WindowValue);
void WWDG_EnableIT(void);
void WWDG_SetCounter(uint8_t Counter);
/* WWDG activation function ***************************************************/
void WWDG_Enable(uint8_t Counter);
/* Interrupts and flags management functions **********************************/
FlagStatus WWDG_GetFlagStatus(void);
void WWDG_ClearFlag(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_WWDG_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/