Merge pull request #78 from cnlohr/experimental

Experimental
This commit is contained in:
CNLohr 2018-12-08 19:14:01 -08:00 committed by GitHub
commit 0b2e686d55
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
14 changed files with 370 additions and 93 deletions

View file

@ -132,24 +132,30 @@ static void LEDUpdate(void * id, struct NoteFinder*nf)
if( led->led_note_attached[j] != -1 ) continue;
if( !led->timebased ) { selindex = j; break; }
float bias = 0;
float timeimp = 1;
if( led->snakey )
{
// bias = (j - led->snakeyplace + led->total_leds+(rand()%100)*.01);
// if( bias > led->total_leds ) bias -= led->total_leds;
float bias = 0;
float timeimp = 1;
bias = (j - led->snakeyplace + led->total_leds) % led->total_leds;
if( bias > led->total_leds / 2 ) bias = led->total_leds - bias + 1;
timeimp = 0;
}
float score = led->time_of_change[j] * timeimp + bias;
if( score < seltime )
float score = led->time_of_change[j] * timeimp + bias;
if( score < seltime )
{
seltime = score;
selindex = j;
}
}
else
{
seltime = score;
selindex = j;
if( led->time_of_change[j] < seltime )
{
seltime = led->time_of_change[j];
selindex = j;
}
}
}
if( selindex >= 0 )

View file

@ -9,6 +9,9 @@ steady_bright = 0
rgby = 1
sourcename = alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
#sourcename = default
#alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
# alsa_output.pci-0000_01_00.1.hdmi-stereo-extra1.monitor
#alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
@ -16,12 +19,12 @@ skipfirst = 0
firstval = 0
port = 7777
address = 192.168.3.192
address = 192.168.11.157
slope=.10
amplify=.5
qtyamp=50
qtyamp=120
timebased=1

View file

@ -6,7 +6,7 @@
#define HPABUFFSIZE 512
#define CCEMBEDDED
#define NUM_LIN_LEDS 255
#define NUM_LIN_LEDS 541
#define DFREQ 16000
#define memcpy ets_memcpy
@ -30,6 +30,7 @@
#define COLORCHORD_OUTPUT_DRIVER CCS.gCOLORCHORD_OUTPUT_DRIVER
#define COLORCHORD_ACTIVE CCS.gCOLORCHORD_ACTIVE
#define INITIAL_AMP CCS.gINITIAL_AMP
#define LED_DRIVER_MODE CCS.gLED_DRIVER_MODE
//We are not enabling these for the ESP8266 port.
#define LIN_WRAPAROUND 0
@ -38,26 +39,29 @@
struct CCSettings
{
uint8_t gSETTINGS_KEY;
uint8_t gROOT_NOTE_OFFSET; //Set to define what the root note is. 0 = A.
uint8_t gDFTIIR; //=6
uint8_t gFUZZ_IIR_BITS; //=1
uint8_t gFILTER_BLUR_PASSES; //=2
uint8_t gSEMIBITSPERBIN; //=3
uint8_t gMAX_JUMP_DISTANCE; //=4
uint8_t gMAX_COMBINE_DISTANCE; //=7
uint8_t gAMP_1_IIR_BITS; //=4
uint8_t gAMP_2_IIR_BITS; //=2
uint8_t gMIN_AMP_FOR_NOTE; //=80
uint8_t gMINIMUM_AMP_FOR_NOTE_TO_DISAPPEAR; //=64
uint8_t gNOTE_FINAL_AMP; //=12
uint8_t gNERF_NOTE_PORP; //=15
uint8_t gUSE_NUM_LIN_LEDS; // = NUM_LIN_LEDS
uint8_t gCOLORCHORD_ACTIVE;
uint8_t gCOLORCHORD_OUTPUT_DRIVER;
uint8_t gINITIAL_AMP;
uint16_t gSETTINGS_KEY;
uint16_t gROOT_NOTE_OFFSET; //Set to define what the root note is. 0 = A.
uint16_t gDFTIIR; //=6
uint16_t gFUZZ_IIR_BITS; //=1
uint16_t gFILTER_BLUR_PASSES; //=2
uint16_t gSEMIBITSPERBIN; //=3
uint16_t gMAX_JUMP_DISTANCE; //=4
uint16_t gMAX_COMBINE_DISTANCE; //=7
uint16_t gAMP_1_IIR_BITS; //=4
uint16_t gAMP_2_IIR_BITS; //=2
uint16_t gMIN_AMP_FOR_NOTE; //=80
uint16_t gMINIMUM_AMP_FOR_NOTE_TO_DISAPPEAR; //=64
uint16_t gNOTE_FINAL_AMP; //=12
uint16_t gNERF_NOTE_PORP; //=15
uint16_t gUSE_NUM_LIN_LEDS; // = NUM_LIN_LEDS
uint16_t gCOLORCHORD_ACTIVE;
uint16_t gCOLORCHORD_OUTPUT_DRIVER;
uint16_t gLED_DRIVER_MODE;
uint16_t gINITIAL_AMP;
};
#define CCCONFIG_ADDRESS 0xAF000
extern struct CCSettings CCS;

@ -1 +1 @@
Subproject commit b0c4a01a4a344054f70b936d448fd0fd6c15ad20
Subproject commit a08b47184b3fcf04172ecc0b6a1aee9c90e5d92d

Binary file not shown.

Binary file not shown.

View file

@ -8,24 +8,29 @@ PORT = /dev/ttyUSB0 # could also be /dev/ttyACM0
WEB_PORT = 80
COM_PORT = 7777
BACKEND_PORT = 7878
PAGE_OFFSET = 65536 # 1048576
MFS_PAGE_OFFSET = 532480 # 0x82000
#SDK_DEFAULT = $(HOME)/esp8266/esp-open-sdk
ESP_GCC_VERS = 4.8.5
#SDK = $(HOME)/esp8266/esp_iot_sdk_v1.5.2
PAGE_SCRIPTS = main.js
FWBURNFLAGS = -b 2000000
FWBURNFLAGS = -b 1500000
OPTS += -DUSE_OPTIMIZE_PRINTF
OPTS += -DMFS_PAGE_OFFSET=$(MFS_PAGE_OFFSET)
OPTS += -DICACHE_FLASH
OPTS += -DDISABLE_CHARRX #Saves about 48 bytes.
OPTS += -DQUIET_REFLASH #Saves about 128 bytes.
OPTS += -DDISABLE_CHARRX #Saves about 300 bytes.
OPTS += -DQUIET_REFLASH #Saves about 96 bytes.
OPTS += -DWS2812_FOUR_SAMPLE #Saves about 224 bytes.
#OPTS += -DWS2812_THREE_SAMPLE
OPTS += -DDISABLE_NET_REFLASH
#OPTS += -DVERIFY_FLASH_WRITE
#OPTS += -DDEBUG
#OPTS += -DFREQ=12500
OPTS += -DSOFTAP_CHANNEL=6
STRIPPED_LIBGCC=YES
PAGE_TITLE = ColorChord Control Panel
PAGE_SCRIPT =

View file

@ -11,33 +11,33 @@ extern volatile uint8_t sounddata[];
extern volatile uint16_t soundhead;
#define CONFIGURABLES 18 //(plus1)
#define CONFIGURABLES 19 //(plus1)
struct SaveLoad
{
uint8_t configs[CONFIGURABLES];
uint8_t SaveLoadKey; //Must be 0xaa to be valid.
uint16_t configs[CONFIGURABLES];
uint16_t SaveLoadKey; //Must be 0xaa to be valid.
} settings;
struct CCSettings CCS;
uint8_t gConfigDefaults[CONFIGURABLES] = { 0, 6, 1, 2, 3, 4, 7, 4, 2, 80, 64, 12, 15, NUM_LIN_LEDS, 1, 0, 16, 0 };
uint16_t gConfigDefaults[CONFIGURABLES] = { 0, 6, 1, 2, 3, 4, 7, 4, 2, 80, 64, 12, 15, NUM_LIN_LEDS, 1, 0, 16, 0, 0 };
uint8_t * gConfigurables[CONFIGURABLES] = { &CCS.gROOT_NOTE_OFFSET, &CCS.gDFTIIR, &CCS.gFUZZ_IIR_BITS, &CCS.gFILTER_BLUR_PASSES,
uint16_t * gConfigurables[CONFIGURABLES] = { &CCS.gROOT_NOTE_OFFSET, &CCS.gDFTIIR, &CCS.gFUZZ_IIR_BITS, &CCS.gFILTER_BLUR_PASSES,
&CCS.gSEMIBITSPERBIN, &CCS.gMAX_JUMP_DISTANCE, &CCS.gMAX_COMBINE_DISTANCE, &CCS.gAMP_1_IIR_BITS,
&CCS.gAMP_2_IIR_BITS, &CCS.gMIN_AMP_FOR_NOTE, &CCS.gMINIMUM_AMP_FOR_NOTE_TO_DISAPPEAR, &CCS.gNOTE_FINAL_AMP,
&CCS.gNERF_NOTE_PORP, &CCS.gUSE_NUM_LIN_LEDS, &CCS.gCOLORCHORD_ACTIVE, &CCS.gCOLORCHORD_OUTPUT_DRIVER, &CCS.gINITIAL_AMP, 0 };
&CCS.gNERF_NOTE_PORP, &CCS.gUSE_NUM_LIN_LEDS, &CCS.gCOLORCHORD_ACTIVE, &CCS.gCOLORCHORD_OUTPUT_DRIVER, &CCS.gINITIAL_AMP, &CCS.gLED_DRIVER_MODE, 0 };
char * gConfigurableNames[CONFIGURABLES] = { "gROOT_NOTE_OFFSET", "gDFTIIR", "gFUZZ_IIR_BITS", "gFILTER_BLUR_PASSES",
"gSEMIBITSPERBIN", "gMAX_JUMP_DISTANCE", "gMAX_COMBINE_DISTANCE", "gAMP_1_IIR_BITS",
"gAMP_2_IIR_BITS", "gMIN_AMP_FOR_NOTE", "gMINIMUM_AMP_FOR_NOTE_TO_DISAPPEAR", "gNOTE_FINAL_AMP",
"gNERF_NOTE_PORP", "gUSE_NUM_LIN_LEDS", "gCOLORCHORD_ACTIVE", "gCOLORCHORD_OUTPUT_DRIVER", "gINITIAL_AMP", 0 };
"gNERF_NOTE_PORP", "gUSE_NUM_LIN_LEDS", "gCOLORCHORD_ACTIVE", "gCOLORCHORD_OUTPUT_DRIVER", "gINITIAL_AMP", "gLED_DRIVER_MODE", 0 };
void ICACHE_FLASH_ATTR CustomStart( )
{
int i;
spi_flash_read( 0x3D000, (uint32*)&settings, sizeof( settings ) );
spi_flash_read( CCCONFIG_ADDRESS, (uint32*)&settings, sizeof( settings ) );
if( settings.SaveLoadKey == 0xaa )
{
for( i = 0; i < CONFIGURABLES; i++ )
@ -202,8 +202,8 @@ int ICACHE_FLASH_ATTR CustomCommand(char * buffer, int retsize, char *pusrdata,
EnterCritical();
ets_intr_lock();
spi_flash_erase_sector( 0x3D000/4096 );
spi_flash_write( 0x3D000, (uint32*)&settings, ((sizeof( settings )-1)&(~0xf))+0x10 );
spi_flash_erase_sector( CCCONFIG_ADDRESS/4096 );
spi_flash_write( CCCONFIG_ADDRESS, (uint32*)&settings, ((sizeof( settings )-1)&(~0xf))+0x10 );
ets_intr_unlock();
ExitCritical();

View file

@ -29,7 +29,7 @@
#define procTaskQueueLen 1
struct CCSettings CCS;
static volatile os_timer_t some_timer;
static os_timer_t some_timer;
static struct espconn *pUdpServer;
void EnterCritical();
@ -43,10 +43,6 @@ static uint8_t hpa_running = 0;
static uint8_t hpa_is_paused_for_wifi;
void ICACHE_FLASH_ATTR CustomStart( );
void ICACHE_FLASH_ATTR user_rf_pre_init()
{
}
//Call this once we've stacked together one full colorchord frame.
static void NewFrame()
@ -66,13 +62,17 @@ static void NewFrame()
break;
};
ws2812_push( ledOut, USE_NUM_LIN_LEDS * 3 );
ws2812_push( ledOut, USE_NUM_LIN_LEDS * 3, LED_DRIVER_MODE );
}
os_event_t procTaskQueue[procTaskQueueLen];
uint32_t samp_iir = 0;
int wf = 0;
void fpm_wakup_cb_func1(void) { wifi_fpm_close(); }
//Tasks that happen all the time.
static void procTask(os_event_t *events)
@ -119,7 +119,6 @@ static void procTask(os_event_t *events)
{
CSTick( 0 );
}
}
//Timer event.
@ -127,6 +126,21 @@ static void ICACHE_FLASH_ATTR myTimer(void *arg)
{
CSTick( 1 );
if( GPIO_INPUT_GET( 0 ) == 0 )
{
if( system_get_rst_info()->reason != 5 ) //See if we're booting from deep sleep. (5 = deep sleep, 4 = reboot, 0 = fresh boot)
{
system_deep_sleep_set_option(4); //Option 4 = When rebooting from deep sleep, totally disable wifi.
system_deep_sleep(2000);
}
else
{
//system_deep_sleep_set_option(1); //Option 1 = Reboot with radio recalibration and wifi on.
//system_deep_sleep(2000);
system_restart();
}
}
if( hpa_is_paused_for_wifi && printed_ip )
{
StartHPATimer(); //Init the high speed ADC timer.
@ -137,7 +151,7 @@ static void ICACHE_FLASH_ATTR myTimer(void *arg)
// printf( "%d/%d\n",soundtail,soundhead );
// printf( "%d/%d\n",soundtail,soundhead );
// uint8_t ledout[] = { 0x00, 0xff, 0xaa, 0x00, 0xff, 0xaa, };
// ws2812_push( ledout, 6 );
// ws2812_push( ledout, 6, LED_DRIVER_MODE );
}
@ -148,7 +162,7 @@ static void ICACHE_FLASH_ATTR udpserver_recv(void *arg, char *pusrdata, unsigned
// uint8_t buffer[MAX_FRAME];
// uint8_t ledout[] = { 0x00, 0xff, 0xaa, 0x00, 0xff, 0xaa, };
uart0_sendStr("X");
ws2812_push( pusrdata+3, len );
ws2812_push( pusrdata+3, len, LED_DRIVER_MODE );
}
void ICACHE_FLASH_ATTR charrx( uint8_t c )
@ -156,7 +170,6 @@ void ICACHE_FLASH_ATTR charrx( uint8_t c )
//Called from UART.
}
void ICACHE_FLASH_ATTR user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
@ -192,7 +205,7 @@ void ICACHE_FLASH_ATTR user_init(void)
while(1) { uart0_sendStr( "\r\nFAULT\r\n" ); }
}
CSInit();
CSInit( 1 );
//Add a process
system_os_task(procTask, procTaskPrio, procTaskQueue, procTaskQueueLen);
@ -203,6 +216,7 @@ void ICACHE_FLASH_ATTR user_init(void)
os_timer_arm(&some_timer, 100, 1);
//Set GPIO16 for Input
#if 0
WRITE_PERI_REG(PAD_XPD_DCDC_CONF,
(READ_PERI_REG(PAD_XPD_DCDC_CONF) & 0xffffffbc) | (uint32)0x1); // mux configuration for XPD_DCDC and rtc_gpio0 connection
@ -211,6 +225,9 @@ void ICACHE_FLASH_ATTR user_init(void)
WRITE_PERI_REG(RTC_GPIO_ENABLE,
READ_PERI_REG(RTC_GPIO_ENABLE) & (uint32)0xfffffffe); //out disable
#endif
system_update_cpu_freq(SYS_CPU_160MHZ);
InitColorChord(); //Init colorchord
@ -227,25 +244,135 @@ void ICACHE_FLASH_ATTR user_init(void)
ws2812_init();
printf( "RST REASON: %d\n", system_get_rst_info()->reason );
// Attempt to make ADC more stable
// https://github.com/esp8266/Arduino/issues/2070
// see peripherals https://espressif.com/en/support/explore/faq
//wifi_set_sleep_type(NONE_SLEEP_T); // on its own stopped wifi working
wifi_set_sleep_type(MODEM_SLEEP_T); // on its own stopped wifi working?
//wifi_fpm_set_sleep_type(NONE_SLEEP_T); // with this seemed no difference
system_os_post(procTaskPrio, 0, 0 );
}
void EnterCritical()
void ICACHE_FLASH_ATTR EnterCritical()
{
PauseHPATimer();
//ets_intr_lock();
}
void ExitCritical()
void ICACHE_FLASH_ATTR ExitCritical()
{
//ets_intr_unlock();
ContinueHPATimer();
}
/*==============================================================================
* Partition Map Data
*============================================================================*/
#define SYSTEM_PARTITION_OTA_SIZE_OPT2 0x6A000
#define SYSTEM_PARTITION_OTA_2_ADDR_OPT2 0x81000
#define SYSTEM_PARTITION_RF_CAL_ADDR_OPT2 0xfb000
#define SYSTEM_PARTITION_PHY_DATA_ADDR_OPT2 0xfc000
#define SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT2 0xfd000
#define SYSTEM_PARTITION_CUSTOMER_PRIV_PARAM_ADDR_OPT2 0x7c000
#define SPI_FLASH_SIZE_MAP_OPT2 2
#define SYSTEM_PARTITION_OTA_SIZE_OPT3 0x6A000
#define SYSTEM_PARTITION_OTA_2_ADDR_OPT3 0x81000
#define SYSTEM_PARTITION_RF_CAL_ADDR_OPT3 0x1fb000
#define SYSTEM_PARTITION_PHY_DATA_ADDR_OPT3 0x1fc000
#define SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT3 0x1fd000
#define SYSTEM_PARTITION_CUSTOMER_PRIV_PARAM_ADDR_OPT3 0x7c000
#define SPI_FLASH_SIZE_MAP_OPT3 3
#define SYSTEM_PARTITION_OTA_SIZE_OPT4 0x6A000
#define SYSTEM_PARTITION_OTA_2_ADDR_OPT4 0x81000
#define SYSTEM_PARTITION_RF_CAL_ADDR_OPT4 0x3fb000
#define SYSTEM_PARTITION_PHY_DATA_ADDR_OPT4 0x3fc000
#define SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT4 0x3fd000
#define SYSTEM_PARTITION_CUSTOMER_PRIV_PARAM_ADDR_OPT4 0x7c000
#define SPI_FLASH_SIZE_MAP_OPT4 4
#define SYSTEM_PARTITION_CUSTOMER_PRIV_PARAM SYSTEM_PARTITION_CUSTOMER_BEGIN
#define EAGLE_FLASH_BIN_ADDR SYSTEM_PARTITION_CUSTOMER_BEGIN + 1
#define EAGLE_IROM0TEXT_BIN_ADDR SYSTEM_PARTITION_CUSTOMER_BEGIN + 2
static const partition_item_t partition_table_opt2[] =
{
{ EAGLE_FLASH_BIN_ADDR, 0x00000, 0x10000},
{ EAGLE_IROM0TEXT_BIN_ADDR, 0x10000, 0x60000},
{ SYSTEM_PARTITION_RF_CAL, SYSTEM_PARTITION_RF_CAL_ADDR_OPT2, 0x1000},
{ SYSTEM_PARTITION_PHY_DATA, SYSTEM_PARTITION_PHY_DATA_ADDR_OPT2, 0x1000},
{ SYSTEM_PARTITION_SYSTEM_PARAMETER, SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT2, 0x3000},
};
static const partition_item_t partition_table_opt3[] =
{
{ EAGLE_FLASH_BIN_ADDR, 0x00000, 0x10000},
{ EAGLE_IROM0TEXT_BIN_ADDR, 0x10000, 0x60000},
{ SYSTEM_PARTITION_RF_CAL, SYSTEM_PARTITION_RF_CAL_ADDR_OPT3, 0x1000},
{ SYSTEM_PARTITION_PHY_DATA, SYSTEM_PARTITION_PHY_DATA_ADDR_OPT3, 0x1000},
{ SYSTEM_PARTITION_SYSTEM_PARAMETER, SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT3, 0x3000},
};
static const partition_item_t partition_table_opt4[] =
{
{ EAGLE_FLASH_BIN_ADDR, 0x00000, 0x10000},
{ EAGLE_IROM0TEXT_BIN_ADDR, 0x10000, 0x60000},
{ SYSTEM_PARTITION_RF_CAL, SYSTEM_PARTITION_RF_CAL_ADDR_OPT4, 0x1000},
{ SYSTEM_PARTITION_PHY_DATA, SYSTEM_PARTITION_PHY_DATA_ADDR_OPT4, 0x1000},
{ SYSTEM_PARTITION_SYSTEM_PARAMETER, SYSTEM_PARTITION_SYSTEM_PARAMETER_ADDR_OPT4, 0x3000},
};
/**
* This is called on boot for versions ESP8266_NONOS_SDK_v1.5.2 to
* ESP8266_NONOS_SDK_v2.2.1. system_phy_set_rfoption() may be called here
*/
void user_rf_pre_init(void)
{
; // nothing
}
/**
* Required function as of ESP8266_NONOS_SDK_v3.0.0. Must call
* system_partition_table_regist(). This tries to register a few different
* partition maps. The ESP should be happy with one of them.
*/
void ICACHE_FLASH_ATTR user_pre_init(void)
{
if(system_partition_table_regist(
partition_table_opt2,
sizeof(partition_table_opt2) / sizeof(partition_table_opt2[0]),
SPI_FLASH_SIZE_MAP_OPT2))
{
os_printf("system_partition_table_regist 2 success!!\r\n");
}
else if(system_partition_table_regist(
partition_table_opt4,
sizeof(partition_table_opt4) / sizeof(partition_table_opt4[0]),
SPI_FLASH_SIZE_MAP_OPT4))
{
os_printf("system_partition_table_regist 4 success!!\r\n");
}
else if(system_partition_table_regist(
partition_table_opt3,
sizeof(partition_table_opt3) / sizeof(partition_table_opt3[0]),
SPI_FLASH_SIZE_MAP_OPT3))
{
os_printf("system_partition_table_regist 3 success!!\r\n");
}
else
{
os_printf("system_partition_table_regist all fail\r\n");
while(1);
}
}

View file

@ -45,6 +45,13 @@ Extra copyright info:
//Creates an I2S SR of 93,750 Hz, or 3 MHz Bitclock (.333us/sample)
// 12000000L/(div*bestbck*2)
//It is likely you could speed this up a little.
#define LUXETRON
#ifdef LUXETRON
#define INVERT
#define WS_I2S_BCK 14
#define WS_I2S_DIV 5
#else
#ifdef WS2812_THREE_SAMPLE
#define WS_I2S_BCK 22 //Seems to work as low as 19, but is shakey at 18.
@ -55,6 +62,7 @@ Extra copyright info:
#else
#error You need to either define WS2812_THREE_SAMPLE or WS2812_FOUR_SAMPLE
#endif
#endif
#ifndef i2c_bbpll
#define i2c_bbpll 0x67
@ -239,11 +247,13 @@ union sdio_slave_status
//static unsigned int i2sBuf[I2SDMABUFCNT][I2SDMABUFLEN];
//I2S DMA buffer descriptors
//static struct sdio_queue i2sBufDesc[I2SDMABUFCNT];
static struct sdio_queue i2sBufDescOut;
static struct sdio_queue i2sBufDescOut0;
static struct sdio_queue i2sBufDescOut1;
static struct sdio_queue i2sBufDescOut2;
static struct sdio_queue i2sBufDescZeroes;
static unsigned int i2sZeroes[32];
static unsigned int i2sBlock[WS_BLOCKSIZE/4];
static unsigned int i2sBlock[(WS_BLOCKSIZE0 + WS_BLOCKSIZE1 + WS_BLOCKSIZE2)/4];
//Queue which contains empty DMA buffers
//DMA underrun counter
@ -290,14 +300,32 @@ void ICACHE_FLASH_ATTR ws2812_init()
SET_PERI_REG_MASK(SLC_RX_DSCR_CONF,SLC_INFOR_NO_REPLACE|SLC_TOKEN_NO_REPLACE);
CLEAR_PERI_REG_MASK(SLC_RX_DSCR_CONF, SLC_RX_FILL_EN|SLC_RX_EOF_MODE | SLC_RX_FILL_MODE);
i2sBufDescOut.owner = 1;
i2sBufDescOut.eof = 1;
i2sBufDescOut.sub_sof = 0;
i2sBufDescOut.datalen = WS_BLOCKSIZE; //Size (in bytes)
i2sBufDescOut.blocksize = WS_BLOCKSIZE; //Size (in bytes)
i2sBufDescOut.buf_ptr=(uint32_t)&i2sBlock[0];
i2sBufDescOut.unused=0;
i2sBufDescOut.next_link_ptr=(uint32_t)&i2sBufDescZeroes; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescOut0.owner = 1;
i2sBufDescOut0.eof = 1;
i2sBufDescOut0.sub_sof = 0;
i2sBufDescOut0.datalen = WS_BLOCKSIZE0; //Size (in bytes)
i2sBufDescOut0.blocksize = WS_BLOCKSIZE0; //Size (in bytes)
i2sBufDescOut0.buf_ptr=(uint32_t)&i2sBlock[0];
i2sBufDescOut0.unused=0;
i2sBufDescOut0.next_link_ptr=(uint32_t)&i2sBufDescOut1; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescOut1.owner = 1;
i2sBufDescOut1.eof = 1;
i2sBufDescOut1.sub_sof = 0;
i2sBufDescOut1.datalen = WS_BLOCKSIZE1; //Size (in bytes)
i2sBufDescOut1.blocksize = WS_BLOCKSIZE1; //Size (in bytes)
i2sBufDescOut1.buf_ptr=(uint32_t)&i2sBlock[WS_BLOCKSIZE0/4];
i2sBufDescOut1.unused=0;
i2sBufDescOut1.next_link_ptr=(uint32_t)&i2sBufDescOut2; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescOut2.owner = 1;
i2sBufDescOut2.eof = 1;
i2sBufDescOut2.sub_sof = 0;
i2sBufDescOut2.datalen = WS_BLOCKSIZE2; //Size (in bytes)
i2sBufDescOut2.blocksize = WS_BLOCKSIZE2; //Size (in bytes)
i2sBufDescOut2.buf_ptr=(uint32_t)&i2sBlock[(WS_BLOCKSIZE1+WS_BLOCKSIZE0)/4];
i2sBufDescOut2.unused=0;
i2sBufDescOut2.next_link_ptr=(uint32_t)&i2sBufDescZeroes; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescZeroes.owner = 1;
i2sBufDescZeroes.eof = 1;
@ -306,16 +334,24 @@ void ICACHE_FLASH_ATTR ws2812_init()
i2sBufDescZeroes.blocksize = 32;
i2sBufDescZeroes.buf_ptr=(uint32_t)&i2sZeroes[0];
i2sBufDescZeroes.unused=0;
i2sBufDescZeroes.next_link_ptr=(uint32_t)&i2sBufDescOut;
i2sBufDescZeroes.next_link_ptr=(uint32_t)&i2sBufDescOut0;
for( x = 0; x < 32; x++ )
{
#ifdef INVERT
i2sZeroes[x] = 0xffffffff;
#else
i2sZeroes[x] = 0x00;
#endif
}
for( x = 0; x < WS_BLOCKSIZE/4; x++ )
for( x = 0; x < (WS_BLOCKSIZE0+WS_BLOCKSIZE1+WS_BLOCKSIZE2)/4; x++ )
{
#ifdef INVERT
i2sBlock[x] = 0x00000000;//(x == 0 || x == 999)?0xaa:0x00;
#else
i2sBlock[x] = 0xffffffff;//(x == 0 || x == 999)?0xaa:0x00;
#endif
/* uint16_t * tt = (uint16_t*)&i2sBlock[x];
(*(tt+0)) = 0xA0F0;
@ -328,7 +364,7 @@ void ICACHE_FLASH_ATTR ws2812_init()
// SET_PERI_REG_MASK(SLC_TX_LINK, ((uint32)&i2sBufDescZeroes) & SLC_TXLINK_DESCADDR_MASK); //any random desc is OK, we don't use TX but it needs something valid
CLEAR_PERI_REG_MASK(SLC_RX_LINK,SLC_RXLINK_DESCADDR_MASK);
SET_PERI_REG_MASK(SLC_RX_LINK, ((uint32)&i2sBufDescOut) & SLC_RXLINK_DESCADDR_MASK);
SET_PERI_REG_MASK(SLC_RX_LINK, ((uint32)&i2sBufDescOut0) & SLC_RXLINK_DESCADDR_MASK);
#if USE_2812_INTERRUPTS
@ -418,6 +454,14 @@ static const uint16_t bitpatterns[16] = {
};
#elif defined(WS2812_FOUR_SAMPLE)
#ifdef INVERT
static const uint16_t bitpatterns[16] = {
~0b1000100010001000, ~0b1000100010001100, ~0b1000100011001000, ~0b1000100011001100,
~0b1000110010001000, ~0b1000110010001100, ~0b1000110011001000, ~0b1000110011001100,
~0b1100100010001000, ~0b1100100010001100, ~0b1100100011001000, ~0b1100100011001100,
~0b1100110010001000, ~0b1100110010001100, ~0b1100111011001000, ~0b1100110011001100,
};
#else
//Tricky, send out WS2812 bits with coded pulses, one nibble, then the other.
static const uint16_t bitpatterns[16] = {
0b1000100010001000, 0b1000100010001110, 0b1000100011101000, 0b1000100011101110,
@ -426,14 +470,17 @@ static const uint16_t bitpatterns[16] = {
0b1110111010001000, 0b1110111010001110, 0b1110111011101000, 0b1110111011101110,
};
#endif
#endif
void ws2812_push( uint8_t * buffer, uint16_t buffersize )
void ws2812_push( uint8_t * buffer, uint16_t buffersize, int driver_mode )
{
uint16_t place;
// while( !ws2812_dma_complete );
#ifdef WS2812_THREE_SAMPLE
if( driver_mode ) return; //Not supported in three-sample mode.
uint8_t * bufferpl = (uint8_t*)&i2sBlock[0];
// buffersize += 3;
@ -484,20 +531,76 @@ void ws2812_push( uint8_t * buffer, uint16_t buffersize )
while( bufferpl < &((uint8_t*)i2sBlock)[WS_BLOCKSIZE] ) *(bufferpl++) = 0;
#elif defined(WS2812_FOUR_SAMPLE)
uint16_t * bufferpl = (uint16_t*)&i2sBlock[0];
if( buffersize * 4 > WS_BLOCKSIZE ) return;
for( place = 0; place < buffersize; place++ )
if( driver_mode )
{
uint8_t btosend = buffer[place];
*(bufferpl++) = bitpatterns[(btosend&0x0f)];
*(bufferpl++) = bitpatterns[(btosend>>4)&0x0f];
uint16_t * bufferpl = (uint16_t*)&i2sBlock[0];
int strips = (buffersize / 3) / 18;
int strip;
int led;
int side;
for( side = 0; side < 2; side++ )
for( strip = 0; strip < strips; strip++ )
{
int byte = (side | (strip<<1)) + 2;
*(bufferpl++) = bitpatterns[(byte&0x0f)];
*(bufferpl++) = 0xffff;
*(bufferpl++) = 0xffff;
*(bufferpl++) = bitpatterns[(byte>>4)&0x0f];
for( led = 0; led < 9; led++ )
{
int inled;
if( side == 0 )
{
inled = strip * 18 + led + 9;
}
else
{
inled = strip * 18 + 8 - led;
}
int g = buffer[inled*3+0];
int r = buffer[inled*3+1];
int b = buffer[inled*3+2];
int y = 0; //R G R B
*(bufferpl++) = bitpatterns[(y&0x0f)];
*(bufferpl++) = bitpatterns[(y>>4)&0x0f];
*(bufferpl++) = bitpatterns[(g&0x0f)];
*(bufferpl++) = bitpatterns[(g>>4)&0x0f];
*(bufferpl++) = bitpatterns[(r&0x0f)];
*(bufferpl++) = bitpatterns[(r>>4)&0x0f];
*(bufferpl++) = bitpatterns[(b&0x0f)];
*(bufferpl++) = bitpatterns[(b>>4)&0x0f];
}
*(bufferpl++) = 0x0000;
*(bufferpl++) = 0xffff;
}
while( bufferpl != (uint16_t*)&i2sBlock[(WS_BLOCKSIZE0+WS_BLOCKSIZE1+WS_BLOCKSIZE2)/4] )
*(bufferpl++) = 0xffff;
}
else
{
uint16_t * bufferpl = (uint16_t*)&i2sBlock[0];
if( buffersize * 4 > WS_BLOCKSIZE0 + WS_BLOCKSIZE1 + WS_BLOCKSIZE2 ) return;
for( place = 0; place < buffersize; place++ )
{
uint8_t btosend = buffer[place];
*(bufferpl++) = bitpatterns[(btosend&0x0f)];
*(bufferpl++) = bitpatterns[(btosend>>4)&0x0f];
}
}
#endif
#if USE_2812_INTERRUPTS
uint16_t leftover = buffersize & 0x1f;
if( leftover ) leftover = 32 - leftover;
for( place = 0; place < leftover; place++ )
@ -510,18 +613,42 @@ void ws2812_push( uint8_t * buffer, uint16_t buffersize )
uint16_t sizeout_words = buffersize * 2;
i2sBufDescOut.owner = 1;
i2sBufDescOut.eof = 1;
i2sBufDescOut.sub_sof = 0;
i2sBufDescOut.datalen = sizeout_words*2; //Size (in bytes)
i2sBufDescOut.blocksize = sizeout_words*2; //Size (in bytes)
i2sBufDescOut.buf_ptr = (uint32_t)&i2sBlock[0];
i2sBufDescOut.unused = 0;
i2sBufDescOut.next_link_ptr=(uint32_t)&i2sBufDescZeroes; //At the end, just redirect the DMA to the zero buffer.
int firstsize = sizeout_words, secondsize = 0;
if( sizeout_words > WS_BLOCKSIZE0 )
{
secondsize = firstsize - (WS_BLOCKSIZE0/4);
firstsize = WS_BLOCKSIZE0/4;
}
i2sBufDescOut0.owner = 1;
i2sBufDescOut0.eof = 1;
i2sBufDescOut0.sub_sof = 0;
i2sBufDescOut0.datalen = sizeout_words*2; //Size (in bytes)
i2sBufDescOut0.blocksize = sizeout_words*2; //Size (in bytes)
i2sBufDescOut0.buf_ptr = (uint32_t)&i2sBlock[0];
i2sBufDescOut0.unused = 0;
i2sBufDescOut0.next_link_ptr=(uint32_t)&i2sBufDescOut1; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescOut1.owner = 1;
i2sBufDescOut1.eof = 1;
i2sBufDescOut1.sub_sof = 0;
i2sBufDescOut1.datalen = sizeout_words*2; //Size (in bytes)
i2sBufDescOut1.blocksize = sizeout_words*2; //Size (in bytes)
i2sBufDescOut1.buf_ptr = (uint32_t)&i2sBlock[WS_BLOCKSIZE0/4];
i2sBufDescOut1.unused = 0;
i2sBufDescOut1.next_link_ptr=(uint32_t)&i2sBufDescOut2; //At the end, just redirect the DMA to the zero buffer.
i2sBufDescOut2.owner = 1;
i2sBufDescOut2.eof = 1;
i2sBufDescOut2.sub_sof = 0;
i2sBufDescOut2.datalen = sizeout_words*2; //Size (in bytes)
i2sBufDescOut2.blocksize = sizeout_words*2; //Size (in bytes)
i2sBufDescOut2.buf_ptr = (uint32_t)&i2sBlock[(WS_BLOCKSIZE0+WS_BLOCKSIZE1)/4];
i2sBufDescOut2.unused = 0;
i2sBufDescOut2.next_link_ptr=(uint32_t)&i2sBufDescZeroes; //At the end, just redirect the DMA to the zero buffer.
SET_PERI_REG_MASK(SLC_RX_LINK, SLC_RXLINK_STOP);
CLEAR_PERI_REG_MASK(SLC_RX_LINK,SLC_RXLINK_DESCADDR_MASK);
SET_PERI_REG_MASK(SLC_RX_LINK, ((uint32)&i2sBufDescOut) & SLC_RXLINK_DESCADDR_MASK);
SET_PERI_REG_MASK(SLC_RX_LINK, ((uint32)&i2sBufDescOut0) & SLC_RXLINK_DESCADDR_MASK);
SET_PERI_REG_MASK(SLC_RX_LINK, SLC_RXLINK_START);
#endif

View file

@ -15,7 +15,9 @@
//NOTE: Blocksize MUST be divisible by 4. Cannot exceed 4092
//Each LED takes up 12 block bytes in WS2812_FOUR_SAMPLE
//Or 9 block bytes in WS2812_THREE_SAMPLE
#define WS_BLOCKSIZE 4000
#define WS_BLOCKSIZE0 4000
#define WS_BLOCKSIZE1 4000
#define WS_BLOCKSIZE2 4000
//You can either have 3 or 4 samples per bit for WS2812s.
//3 sample can't go quite as fast as 4.
@ -28,7 +30,9 @@
//#define WS2812_FOUR_SAMPLE
void ICACHE_FLASH_ATTR ws2812_init();
void ws2812_push( uint8_t * buffer, uint16_t buffersize ); //Buffersize = Nr LEDs * 3
void ws2812_push( uint8_t * buffer, uint16_t buffersize, int led_mode ); //Buffersize = Nr LEDs * 3
//led_mode = 0 for WS2812B
//led_mode = 1 for luxehedron
#endif

Binary file not shown.

View file

@ -3,6 +3,7 @@
void send_openocd_command(int command, void *message);
void send_text( const char * text );
void send_text_value( const char * text, uint32_t val );
void _delay_us(uint32_t us);

View file

@ -140,7 +140,7 @@ void PendSV_Handler(void)
*/
void SysTick_Handler(void)
{
TimingDelay_Decrement();
TimingDelay_Decrement();
}
/******************************************************************************/