colorchord/embeddedstm32f303/adc.c

144 lines
4.3 KiB
C
Raw Normal View History

//Mostly from: http://www.pezzino.ch/stm32-adc-voltage-monitor/
//Also: http://www.micromouseonline.com/2009/05/26/simple-adc-use-on-the-stm32/
#include "adc.h"
#include <stm32f30x_rcc.h>
#include <stm32f30x_gpio.h>
#include <stm32f30x_adc.h>
#include <stm32f30x_tim.h>
#include <stm32f30x_misc.h>
static int calibration_value;
extern RCC_ClocksTypeDef RCC_Clocks;
2020-08-05 10:41:18 +02:00
#ifdef TQFP32
#define GPIOADCPORT GPIOA
#define GPIOADCNUM GPIO_Pin_0
#define ADCPLLCLK RCC_ADC12PLLCLK_Div2
#define ADCPERIPHEN RCC_AHBPeriph_ADC12
#define ADCPORTAHB RCC_AHBPeriph_GPIOA
#define ADCNUM ADC1
#define ADCCHAN ADC_Channel_1
#else
#define GPIOADCPORT GPIOB
#define GPIOADCNUM GPIO_Pin_12
#define ADCPLLCLK RCC_ADC34PLLCLK_Div2
#define ADCPERIPHEN RCC_AHBPeriph_ADC34
#define ADCPORTAHB RCC_AHBPeriph_GPIOB
#define ADCNUM ADC4
#define ADCCHAN ADC_Channel_3
#endif
void InitADC()
{
ADC_InitTypeDef ADC_InitStructure;
ADC_CommonInitTypeDef ADC_CommonInitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
/* Configure the ADC clock */
2020-08-05 10:41:18 +02:00
RCC_ADCCLKConfig( ADCPLLCLK );
/* Enable ADC1 clock */
2020-08-05 10:41:18 +02:00
RCC_AHBPeriphClockCmd( ADCPERIPHEN, ENABLE );
/* ADC Channel configuration */
/* GPIOC Periph clock enable */
2020-08-05 10:41:18 +02:00
RCC_AHBPeriphClockCmd( ADCPORTAHB, ENABLE );
/* Configure ADC Channel7 as analog input */
2020-08-05 10:41:18 +02:00
GPIO_InitStructure.GPIO_Pin = GPIOADCNUM;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
2020-08-05 10:41:18 +02:00
GPIO_Init( GPIOADCPORT, &GPIO_InitStructure );
ADC_StructInit( &ADC_InitStructure );
/* Calibration procedure */
2020-08-05 10:41:18 +02:00
ADC_VoltageRegulatorCmd( ADCNUM, ENABLE );
/* Insert delay equal to 10 µs */
_delay_us( 10 );
ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_CommonInitStructure.ADC_Clock = ADC_Clock_AsynClkMode;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_DMAMode = ADC_DMAMode_OneShot;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = 0;
2020-08-05 10:41:18 +02:00
ADC_CommonInit( ADCNUM, &ADC_CommonInitStructure );
ADC_InitStructure.ADC_ContinuousConvMode = ADC_ContinuousConvMode_Enable;
ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ExternalTrigConvEvent = ADC_ExternalTrigConvEvent_0;
ADC_InitStructure.ADC_ExternalTrigEventEdge = ADC_ExternalTrigEventEdge_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_OverrunMode = ADC_OverrunMode_Disable;
ADC_InitStructure.ADC_AutoInjMode = ADC_AutoInjec_Disable;
ADC_InitStructure.ADC_NbrOfRegChannel = 1;
2020-08-05 10:41:18 +02:00
ADC_Init( ADCNUM, &ADC_InitStructure );
/* ADC4 regular channel3 configuration */
2020-08-05 10:41:18 +02:00
ADC_RegularChannelConfig( ADCNUM, ADCCHAN, 1, ADC_SampleTime_181Cycles5 );
/* Enable ADC4 */
2020-08-05 10:41:18 +02:00
ADC_Cmd( ADCNUM, ENABLE );
/* wait for ADRDY */
2020-08-05 10:41:18 +02:00
while( !ADC_GetFlagStatus( ADCNUM, ADC_FLAG_RDY ) );
NVIC_InitTypeDef NVIC_InitStructure;
/* Enable the TIM2 gloabal Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init (&NVIC_InitStructure);
/* TIM2 clock enable */
RCC_APB1PeriphClockCmd (RCC_APB1Periph_TIM2, ENABLE);
/* Time base configuration */
RCC->CFGR |= 0X1400;
TIM_TimeBaseStructure.TIM_Period = (RCC_Clocks.HCLK_Frequency/(ADCFS*ADCOVERSAMP)) - 1;
TIM_TimeBaseStructure.TIM_Prescaler = 1 - 1; // Operate at clock frequency
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit (TIM2, &TIM_TimeBaseStructure);
/* TIM IT enable */
TIM_ITConfig (TIM2, TIM_IT_Update, ENABLE);
/* TIM2 enable counter */
TIM_Cmd (TIM2, ENABLE);
/* Start ADC4 Software Conversion */
2020-08-05 10:41:18 +02:00
ADC_StartConversion( ADCNUM );
}
void TIM2_IRQHandler (void)
{
static uint8_t oversamp = 0;
static int32_t average = 0;
static int32_t oversampout = 0;
if (TIM_GetITStatus (TIM2, TIM_IT_Update) != RESET) {
TIM_ClearITPendingBit (TIM2, TIM_IT_Update);
2020-08-05 10:41:18 +02:00
int16_t value = ADC_GetConversionValue(ADCNUM);
ADC_StartConversion( ADCNUM );
oversampout += value;
oversamp++;
if( oversamp >= ADCOVERSAMP )
{
value = oversampout / ADCOVERSAMP;
average = ((average*1023) + (value*1024))/1024;
value = value-(average/1024);
oversamp = 0;
ADCCallback( value );
oversampout = 0;
}
}
}