colorchord/embedded8266/README.md

#ESP8266 ColorChord

## WARNING THIS IS UNDER CONSTRUCTION

(based off of ESP8266 I2S WS2812 Driver)

This project is based off of the I2S interface for the mp3 player found here:
https://github.com/espressif/esp8266_mp3_decoder/

If you want more information about the build environment, etc.  You should 
check out the regular WS2812 driver, found here: https://github.com/cnlohr/ws2812esp8266

WARNING: This subproject is very jankey!  It's about stable, but I don't think it's quite there yet.

## Hardware Connection

Unfortunately the I2S Out (WS2812 in) pin is the same as RX1 (pin 25), which means if you are programming via the UART, it'll need to be unplugged any time you're testing.  The positive side of this is that it is a pin that is exposed on most ESP8266 breakout boards.

The audio data is taken from TOUT, but must be kept between 0 and 1V.
Update ColorChord for the ESP8266 2015-07-27 09:34:00 +02:00			`#ESP8266 ColorChord`
I am on my way with this, but it's going slowly. 2015-06-04 07:51:24 +02:00
Update ESP8266 version 2015-07-29 07:54:49 +02:00			`## WARNING THIS IS UNDER CONSTRUCTION`

Update ColorChord for the ESP8266 2015-07-27 09:34:00 +02:00			`(based off of ESP8266 I2S WS2812 Driver)`
I am on my way with this, but it's going slowly. 2015-06-04 07:51:24 +02:00
Update ColorChord for the ESP8266 2015-07-27 09:34:00 +02:00			`This project is based off of the I2S interface for the mp3 player found here:`
			`https://github.com/espressif/esp8266_mp3_decoder/`

			`If you want more information about the build environment, etc. You should`
			`check out the regular WS2812 driver, found here: https://github.com/cnlohr/ws2812esp8266`

			`WARNING: This subproject is very jankey! It's about stable, but I don't think it's quite there yet.`

			`## Hardware Connection`

			`Unfortunately the I2S Out (WS2812 in) pin is the same as RX1 (pin 25), which means if you are programming via the UART, it'll need to be unplugged any time you're testing. The positive side of this is that it is a pin that is exposed on most ESP8266 breakout boards.`

			`The audio data is taken from TOUT, but must be kept between 0 and 1V.`
I am on my way with this, but it's going slowly. 2015-06-04 07:51:24 +02:00