colorchord/embeddedstm32f303/Makefile

77 lines
1.7 KiB
Makefile
Raw Permalink Normal View History

TARGET=main
all: burn
PREFIX=arm-none-eabi
CC=$(PREFIX)-gcc
LD=$(PREFIX)-gcc
AS=$(PREFIX)-as
CP=$(PREFIX)-objcopy
OD=$(PREFIX)-objdump
OBJCOPYFLAGS = -O binary
BIN=$(CP) -O ihex
2020-08-05 10:41:18 +02:00
DEFS = -DSTM32F30X
STARTUP = lib/startup_stm32f30x.s
MCU = cortex-m4
MCFLAGS = -mcpu=$(MCU) -mthumb -mlittle-endian -mthumb-interwork
STM32_INCLUDES = -Ilib -I. -ISTM32F30x_StdPeriph_Driver/inc
OPTIMIZE = -Ofast -mfloat-abi=hard -mfpu=fpv4-sp-d16 -flto -ffunction-sections -fdata-sections -Wl,--relax
CFLAGS = $(MCFLAGS) $(OPTIMIZE) $(DEFS) \
-I. \
$(STM32_INCLUDES) \
-I../embeddedcommon \
-Wl,-T,lib/stm32f303.ld
2020-08-05 10:41:18 +02:00
CFLAGS+=-DDEBUG
2020-08-05 10:41:18 +02:00
2020-08-05 19:28:14 +02:00
#If you use a TQFP STM32F303. (x6, x8)
2020-08-05 10:41:18 +02:00
CFLAGS+=-I. -DTQFP32 -DHSE_VALUE=8000000
2020-08-05 19:28:14 +02:00
#From the nucleos(sp?) (STM32F303xB/xC)
2020-08-05 10:41:18 +02:00
#CFLAGS+=-I. -DHSE_VALUE=25000000
AFLAGS = $(MCFLAGS)
SRC = main.c \
spi2812.c \
stm32f30x_it.c \
lib/system_stm32f30x.c \
lib/systems.c \
adc.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_dma.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_spi.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_tim.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_adc.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_misc.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_rcc.c \
STM32F30x_StdPeriph_Driver/src/stm32f30x_gpio.c \
../embeddedcommon/DFT32.c \
../embeddedcommon/embeddednf.c \
../embeddedcommon/embeddedout.c
burn : $(TARGET).bin
openocd -f flash.cfg #-d3
terminal :
openocd -f terminal.cfg
$(TARGET).bin : $(TARGET).out
$(CP) $(OBJCOPYFLAGS) $< $@
$(TARGET).hex: $(EXECUTABLE)
$(CP) -O ihex $^ $@
$(TARGET).out : $(SRC) $(STARTUP)
$(CC) $(CFLAGS) $^ -lm -lc -lnosys -o $@
clean:
rm -f $(TARGET).lst $(TARGET).out $(TARGET).hex $(TARGET).bin $(TARGET).map $(EXECUTABLE)